Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
Add draft to cast and molded parts. Understand the various types of draft features you can create. Perform Draft Analysis to determine which faces need draft added to them.
When edges of a part are too close to allow for fillets to be created properly, often making use of separate solid bodies can help. Separate features into separate solid bodies. Apply fillets to the individual bodies. Use the Combine command to add the bodies back together. Apply an additional fillet to the part to complete the model.
Use the Interference Detection tool to identify any overlap between parts in an assembly. Clearance between parts can also be detected using the Clearance Verification tool. Use the Interference Detection tool to identify interferences between assembly components. Explore the options available within the Interference Detection tool. Use the Clearance Verification tool to identify clearances between assembly components. Explore the options available with the Clearance Verification tool.
Explore the Miter Flange feature, including sketching the profile, edge selection, and other pertinent options. Create a miter flange. Learn and understand the different options for miter flange.
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
Add each of the six mechanical mate types to control the degrees of freedom of components when designing mechanisms. Mate a cylinder, plane, or point to a series of tangent faces with a cam follower mate. Limit the rotational movement between two components with a hinge mate. Move one component linearly to move another component rotationally with a rack and pinion mate. Add a pitch relation between the rotation of one component and the translation of another with a screw mate. Rotate two components relative to one another with a gear mate or a universal joint mate.
Create basic, aligned, offset, and partial or half-section views, including scope and advanced properties. Add several types of section views to a drawing. Define section view properties. Modify section views.
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Hollow out solid bodies using the Shell feature. Apply different wall thicknesses to selected faces. Select multiple faces to be removed in the shelling operation. Understand how the shelling operation affects filleted and rounded edges.
Use the Freeform feature to create organic features by adjusting the outward and inward shape of a face. Modify faces using control curves and control points to create curvilinear designs. Use the Freeform feature to create a shape with an organic feel. Create control curves and control points. Deform a face using control curves, control points, and the triad. Edit a sketch to make the freeform grid follow the shape of the face to be deformed.
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Insert features in an assembly that exist only in the assembly and not the individual part files. Add a Hole Wizard assembly feature. Create an assembly feature cut to act as a section view. Modify the feature scope to determine which parts are affected by the assembly feature.
Global variables declare a named value that dimensions can be set equal to or that can be used in equations. Equations are mathematical expressions that can define dimension values as well as relate dimensions to each other. Create global variables. Use global variables to set fillet features to be equal radii. Use global variables in equations. Use equations to control dimension values.
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Create a pattern of one or more features or bodies in one or two linear directions. Unwanted instances can be left out of the pattern, and spacing and other dimensions may be varied. Create bi-directional linear patterns of existing features. Skip instances in a pattern. Vary parameters of pattern instances.
