Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Use the Post Process command to generate NC code from the parts toolpath and operation information. Select the post processor within the machine dialog. Run the Post Process command and set a file name and location for saving. Generate the NC code and select the option to Open G-Code in the SOLIDWORKS CAM NC Editor. Review the NC code within the SOLIDWORKS CAM NC Editor.
Use the New Contain Area command on an operation to restrict toolpaths to a specific area. Copy the face mill operation containing the avoid areas and delete the avoid areas from the copy. Create contain areas on the copied face mill operation using the 2D sketches in the part. Generate a toolpath for the copied face mill operation. Examine the contain areas of the face mill operation.
Use the New Avoid Area command on an operation to designate an area not to be machined. Create avoid areas on a face mill operation using the 2D sketches in the part. Examine the avoid areas by expanding the face mill operation.
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
Use the Edit Definition command to optimize a roughing operation to increase toolpath efficiency and reduce machine cycle time. Modify the optimization of a rough mill operation. Set optimization method to shortest path. Set start point options. Simulate the toolpath to examine results.
Use Interactive Feature Regognition (IFR) to manually create a machinable feature. Create a corner slot feature using the 2.5 axis feature command. Review geometry selection options to define the feature. Set the feature end condition. Modify the machining strategy for the feature.
Use the Edit Definition command to modify contouring operation leadin and leadout parameters. Modify leadin type. Modify leadin amount and overlap. Modify arc radius and arc angle.
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Use the Edit Definition command to modify roughing operations. Change pocketing pattern. Set side parameters. Set depth parameters.
Use the Sort Operations command to automatically reorder operations. Examine sort operations process options. Set sort by order for operation type.
Reorder operations manually to optimize the machining workflow. Perform manual operation reordering via drag and drop. Reorder multiple features using multiselect.
Run a toolpath simulation to examine material removal. Run a toolpath simulation. Control the toolpath simulation. Utilize display options.
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Use Automatic Feature Regognition (AFR) to automatically extract the machinable features to be machined. Set options to define feature types to extract. Review the hole recognition and feature groups options. Review options to automatically generate operations and toolpaths. Extract machineable features and review the features in the CAM Feature Tree.
Use the Coordinate System command to define and assign a Fixture Coordinate System for the active machine. Select the method for defining coordinate system. Define and select a coordinate system. Examine the option for creating a SOLIDWORKS coordinate system.
Use the Stock Manager to define the material, stock type and size to machine the part from. Select the stock material. Select stock type to define size and shape. Set the stock size options. View the stock preview.
