See how to import an assembly into SOLIDWORKS Treehouse, then make modifications to the assembly. Edit the custom properties, quantities, and suppression state of components in an assembly. Add a sub-assembly and parts to an assembly in SOLIDWORKS Treehouse. Open assemblies in SOLIDWORKS and review the modifications made in SOLIDWORKS Treehouse.
Lesson
4 years ago
ENG
SustainabilityXpress estimates a models carbon footprint, energy consumed during its lifecycle, Air acidification, and water eutrophication. Information is analyzed such as the material used, maufcturing process, manufacturing region, use region, and end of life. Explore how different materials and manufacturing processes affect the environmental impact for a design Specify product use information to determine values for transportation and end of life. Understand the information displayed in the Environmental Impact charts. Learn how to set an environmental impact baseline to compare changes to. Generate a report of the Sustainability output.
Lesson
3 years ago
ENG
JPN
Create, edit and save custom routing assembly templates using an existing routing assembly template. Create and save a custom routing assembly template. Specify different drafting standards, units, and other document properties as the defaults that will be used when you create a new route with the custom template.
Lesson
3 years ago
ENG
JPN
Insert a reducing outlet tee into an existing route and orient it using keyboard shortcuts and a triad. Use the Auto Route tool to connect the pipes resulting from the additional feature. Add in-line fittings to existing routes. Use keyboard shortcuts and the triad to orient and position an in-line fitting.
Lesson
3 years ago
ENG
JPN
Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
Lesson
3 years ago
ENG
JPN
Use SimulationXpress to analyze deformation of parts by applying fixtures and loads and defining materials. Vary load and/or pressure and customize materials. Learn to start and run SimulationXpress to analyze a single body part. Get comfortable working with items on design tree. Understand that pressure and/or load can be applied only to faces uniformly and constantly. Understand that custom materials properties must accurately represent part materials.
Lesson
3 years ago
ENG
JPN
Adjust the mesh density to adjust accuracy of a simulation. Run a simulation. Use the SimulationXpress wizard to view results such as the stress, displacement, deformation, and factor of safety of the simulation. Generate and save an eDrawings file or word document both of which display the results of the simulation. Adjust a mesh in a simulation. Run a simulation. Interpret the results of a simulation. Generate an eDrawing file or Microsoft Word document with the results.
Lesson
3 years ago
ENG
JPN
Based on analyses result, optimize factor of safety, maximum stress or maximum displacement value to an acceptable value. Vary a dimension within the range to try to meet the requirement. Make the design leaner or reduce material cost if it meets or exceeds the factor of safety. Achieve factor of safety through optimizing design. Use built-in automation capability to optimize a model. Run simulation.
Lesson
3 years ago
ENG
JPN
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
3 years ago
ENG
JPN
Observe stress analysis of a part using SimulationXpress to determine the deformation of the part under the influence of a load (force or pressure). Understand the assumptions and limitations of SimulationXpress. Observe stress analysis being performed on a part.
Lesson
3 years ago
ENG
JPN
Blocks group sketch entities and dimensions together so that they move as one in a sketch. Together with a layout sketch, you can go directly from an assembly sketch to the full assembly. Create, edit and save blocks. Create a layout sketch of an assembly using blocks. Build assembly components based on the existing blocks.
Lesson
2 years ago
ENG
JPN
Create and use a custom route specification template using the Routing Library Manager. Specify size and schedule of pipe segments. Select pipes and elbows from the Piping and Tubing Database. Insert route components with route specification templates.
Lesson
2 years ago
ENG
JPN
Edit a pipe route relative to the pipe\'s geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Lesson
2 years ago
ENG
JPN
This lesson contains exercises so you can improve your proficiency with Sketching before taking the Certified SOLIDWORKS Associate (CSWA) exam.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the first of two lessons containing these exercises.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the second of two lessons containing these exercises.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Assemblies before taking the Certified SOLIDWORKS Associate (CSWA) exam.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
Lesson
2 years ago
ENG
Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Lesson
2 years ago
ENG
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Lesson
2 years ago
ENG
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Lesson
2 years ago
ENG
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Lesson
2 years ago
ENG
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Lesson
2 years ago
ENG