訓練目錄
使用輪廓和路徑草圖來產生掃出凸緣。 產生掃出凸緣的輪廓和路徑草圖。 使用「掃出凸緣」功能來產生掃出凸緣。 在「掃出凸緣」標籤中定義鈑金參數。
Lesson
2 年 前
ENG
JPN
示範如何使用 Windows「檔案總管」介面及 SOLIDWORKS PDM 工作列項目圖示登入資料保險箱。 使用相同的登入認證登入多個資料保險箱。 使用不同的登入認證登入多個資料保險箱。 登出資料保險箱。 設定登入 Windows 使用者設定檔時的自動登入功能。
Lesson
1 年 前
ENG
瞭解如何啟動線路設計,以及路線次組合件如何組織和儲存路線的零組件。 啟用「線路設計」附加程式。 找到「管路」、「軟管」和「電路」功能表。 瞭解線路設計次組合件。 識別線路設計資料庫零組件。 使用 Routing Library Manager 載入設定。
Lesson
3 年 前
ENG
JPN
使用管路工程圖和標準工程圖工具,產生包含正投影視圖、零件表、細部放大圖和註記的管路工程圖。 加入註記和尺寸到工程圖。 產生管路工程圖。 加入零件表到工程圖。
Lesson
1 年 前
ENG
JPN
The goal of this course is to teach you to create Weldment parts and drawings in SOLIDWORKS. Weldment functions are designed for modeling structural members and are especially useful for creating frames and woodworking projects.
eCourse
1 年 前
ENG
The goal of this course is to explore many of the surfacing features inside SOLIDWORKS. Along with how to create and apply these surfacing features, additional features and methods commonly used in ergonomic and industrial designed models are also introduced.
eCourse
4 年 前
ENG
The goal of this course is to teach you how to use the Mold Tools in SOLIDWORKS. In addition, manual surface modeling techniques will be introduced which can assist with solving mold making problems.
eCourse
1 年 前
ENG
In this course you will learn how to solve fluid flow and heat transfer problems using SOLIDWORKS Flow Simulation. SOLIDWORKS Flow Simulation is an easy to use computational fluid dynamics software package.
eCourse
1 年 前
ENG
In this course, you will learn about what types of dynamic environments exist and the tools available for their simulation. Dynamic problems can be computationally intensive. For that reason, dynamic loads are divided into several basic types. Each will call for a different simulation tool to treat it efficiently.
eCourse
6 月 前
ENG
In this course, you will learn how to use SOLIDWORKS Motion to analyze the kinematic or dynamic behavior of your SOLIDWORKS assembly model.
eCourse
2 年 前
ENG
The following course relates to the features found in SOLIDWORKS Electrical Schematic, each modules provides insight into how to best leverage the available tools to achieve results.
eCourse
1 年 前
ENG
此單元說明 SOLIDWORKS MBD 概要。 其中涵蓋在 3D 中定義模型、擷取 3D 視圖,以及發佈 3D PDF 和 eDrawing 檔案等程序。 瞭解如何將產品及製造資訊 (PMI) 加入 3D 模型。 使用「複製排列特徵」工具產生集合的複製排列。 熟悉 3D PDF 範本編輯器。 如何發佈 3D PDF。 如何發佈 eDrawing 檔案。
Lesson
4 年 前
ENG
比較兩個零件的幾何來尋找面和體積差異。 這在比較輸入的幾何時特別有用。 尋找類似零件之幾何中的差異。 尋找類似零件之體積中的差異。
Lesson
2 年 前
ENG
JPN
使用 SimulationXpress,套用固定物和負載並定義材質,來分析零件的變形。 隨負載及/或壓力和自訂材質變化。 瞭解如何啟動和執行 SimulationXpress 以分析單一本體零件。 熟悉在設計樹狀結構上使用項目。 瞭解壓力及/或負載只能均勻且一致地套用在面上。 瞭解自訂材質屬性必須精確代表零件材質。
Lesson
3 年 前
ENG
JPN
產生面圓角以修改及修補輸入的幾何。使用選定的面及邊線定義圓角的大小和形狀,而不使用固定半徑值。 使用「曲率連續」、「固定寬度」、「沿相切面進行」及「控制線」等選項,來定義面圓角。 使用面圓角修改輸入的幾何。 確保圓角相鄰面的曲率連續。 設定圓角的固定弦長。 定義面圓角的停止邊線或控制線。
Lesson
3 月 前
ENG
JPN
使用表面工具在表面相交處產生複雜的混合。 此單元中使用的工具包含修剪曲面、疊層拉伸曲面和填補曲面。 將草圖作為修剪圖元來修剪曲面。 使用疊層拉伸曲面在曲面間產生混合。 使用「填補曲面」工具填補完全由表面界定的區域。
Lesson
2 年 前
ENG
JPN
瞭解如何在 FloXpress 中設定 CFD 分析。 瞭解用於設定分析的下列四個頁面:檢查幾何、流體、流動入口及流動出口。
Lesson
3 月 前
ENG
使用「量測」和「物質特性」工具來評估尺寸、重量及模型的其他屬性。 瞭解零件的材質和座標系統如何影響到其物質特性。 在點和圓之間量測以決定零件大小。
Lesson
5 月 前
ENG
FRA
DEU
JPN
CHS
使用 ConfigurationManager,將模型組態加入組合件並顯示其零組件的兩種版本。 此外,探索模型組態屬性的進階選項。 使用 ConfigurationManager 將模型組態加入組合件。 使用模型組態屬性的進階選項,來控制新的零組件及結合。 產生兩種版本的組合件,以代表不同的可用零組件。
Lesson
5 月 前
ENG
FRA
DEU
JPN
CHS
使用 ConfigurationManager 控制特徵的抑制狀態及設定尺寸,以加入模型組態和修改零件。 使用 ConfigurationManager 將模型組態加入零件。 抑制特徵以代表不同版本的模型。 設定尺寸以產生大小不同版本的零件。
Lesson
5 月 前
ENG
FRA
DEU
JPN
CHS
探索儲存特定零件之預設值的量規表格和彎折表格。填入及利用安裝期間提供的範例表格。 產生和自訂範例表格以符合您自己的需求。 自訂和產生彎折表格。 瞭解量規表格和彎折表格的使用。
Lesson
2 年 前
ENG
JPN
The goal of this course is to teach you how to create animations using SOLIDWORKS assemblies. Animations are used to show how something works by adding motion and enhance the assembly appearance with visual effects. Note Download files for this course are quite large, so we are not able to provide every sample file. If you would like to see more of the demonstration files, you can download the complete set of files for the original book. Go to https://www.solidworks.com/support/training/training-files and search for ‘animations’.
eCourse
3 月 前
ENG
使用 3D 草圖變更路線幾何。刪除、修剪和加入草圖幾何,以編輯路線。刪除現有接頭並加入替換接頭。 編輯現有路線。 刪除現有接頭。 加入替換接頭。
Lesson
1 年 前
ENG
JPN
The goal of this course is to teach you to create sheet metal parts, flat patterns and drawings in SOLIDWORKS. Sheet metal design functions and techniques are useful for creating sheet metal parts to enclose or house product designs.
eCourse
1 年 前
ENG