SimulationXpress では、拘束と荷重を適用し、材料を定義することで、部品の変形を解析します。 荷重と圧力を変えて、材料をカスタマイズします。 SimulationXpress を開始して実行し、単一ボディ部品を解析する。 デザイン ツリーのアイテムの操作方法を理解する。 圧力や荷重は面に対してのみ均一に一定に適用できることを理解する。 ユーザー定義材料のプロパティが正確に部品の材料を表す必要があることを理解する。
Lesson
3 年 前
ENG
JPN
メッシュ密度を調整して、シミュレーションの精度を調整します。シミュレーションを実行する。SimulationXpress ウィザードを使用して、シミュレーションにおける応力、変位、変形、および安全率などの結果を表示します。 eDrawings ファイルまたは Word 文書を作成して保存します。ともに、シミュレーションの結果が表示されます。 シミュレーションのメッシュを調整する。 シミュレーションを実行する。 シミュレーションの結果を解釈する。 結果を含む eDrawings ファイルまたは Microsoft Word 文書を作成する。
Lesson
3 年 前
ENG
JPN
解析結果をもとに、安全率、最大応力または最大変位の値を許容できる値に最適化します。要件に対応するように、範囲内で寸法を変更して試します。 安全率に適合するか、超過するかによって、設計の無駄をなくすか、材料コストを減らします。 デザインの最適化により安全率を達成する。 内蔵の自動化機能を使用して、モデルを最適化する。 シミュレーションを実行する。
Lesson
3 年 前
ENG
JPN
Review the basic functionality of the SOLIDWORKS Nonlinear module. Show activation of SOLIDWORKS Simulation Add-In. Learn three basic nonlinear phenomena in engineering calculations. Review of control methods available in the module. Review of basic material models available in the module.
Lesson
3 年 前
ENG
Review the difference between small displacement linear, and large displacement nonlinear analyses. Introduce the concept of time curves, and discuss basic options. Solve small displacement linear analysis to demonstrate inaccurate solution. Define a nonlinear simulation study. Use time curves to control variation of the nonlinear loading. Use fixed increment stepping, and autostepping stepping procedures to solve the nonlinear problem. Postprocess results of the nonlinear simulation. Compare results from nonlinear studies with various setup parameters.
Lesson
3 年 前
ENG
Introduction to the force control and displacement control methods in nonlinear module. Experience and resolve solution instabilities when solving nonlinear problems. Define nonlinear study boundary conditions and loads. Stabilize force control method to arrive to a final solution. Solve the problem using the displacement control method. Adjust boundary conditions for the displacement control method. Compare nonlinear results from the force control, and the displacement control methods.
Lesson
3 年 前
ENG
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
Lesson
3 年 前
ENG
設計を最適化し、モデル寸法を変更してモデル重量を減らす方法を学びます。 パラメーターと拘束を適用して、目標に合わせて設計を最適化する。 シミュレーションでのデザイン スタディの使用方法を学ぶ。
Lesson
3 年 前
ENG
Generate a cam profile based on an input follower displacement from a data set. Define a motion of a follower using Data Points. Generate a cam profile using Trace Path. Verify the generated cam profile.
Lesson
2 年 前
ENG
Simulate a mechanism placing an object into a box and a cover on the box. Apply servo motors. Add proximity sensors. Create and run event based motion study.
Lesson
2 年 前
ENG
SOLIDWORKS Simulation 製品について、すべてのモジュールを学習します。 SOLIDWORKS Flow を使用して熱伝導と流体フローを解析する。 Sustainability を使用して設計の環境に与える影響を軽減する。 SOLIDWORKS Simulation を使用した応力/ひずみ解析を学ぶ。 SOLIDWORKS Motion を使用してリジッド ボディ ダイナミクスを解析する。 SOLIDWORKS Plastics を使用したプラスチック射出パーツのフィル パターンを見る。
Lesson
2 年 前
ENG
Examine the motion of a catapult as it is loaded and throws a projectile. Add solid bodies contact, add a spring and apply friction. Determine torque required to rotate the crank and load the catapult. Determine the displacement of the loading spring. Study the effect of contact friction on the motion of the projectile.
Lesson
2 年 前
ENG
薄厚構造のモデルにシェルを使用する方法を学びます。 シェル マネージャーを使用して、薄厚構造にシェルを作成する。 処理の負荷を軽減するため、対称拘束を適用する。
Lesson
1 年 前
ENG
アセンブリ構造の固有振動を解析するときの接触の使用方法を学びます。 アセンブリ構造の固有振動の形とモードを解析する。 各種の接触条件をテストして、構造の強度を解析する。
Lesson
1 年 前
ENG
このモジュールでは、Simulation のユーザー インターフェースと、単純な部品のセットアップ プロセスを紹介します。それからシミュレーションを実行して、結果を解析します。 Simulation のユーザー インターフェースについて学ぶ。 拘束、材料、荷重を適用する。 シミュレーションを実行して、モデルの応力と変位を解析する。
Lesson
3 月 前
ENG
このシリーズでは、接触の概念と、ボルトおよびリモート荷重について紹介します。 アセンブリ内の接触を解析する。 コネクタとリモート荷重を使用して表される部品を排除して、モデルを簡略化する。
Lesson
3 月 前
ENG
疲労解析モジュールを使用して、繰り返し負荷のかかる条件下の構造を解析する方法を学びます。 反復荷重解析のために材料に S-N 曲線を適用する。 より現実的な結果が得られるように、補正係数を適用する。 損傷プロットを表示して、材料の寿命を解析する。
Lesson
3 月 前
ENG
このモジュールでは、要素のサイズによる応力、ひずみや変位への影響を確認して、メッシュ収束の概念を学びます。 グローバル要素サイズの変更が結果にどのように影響するかを学ぶ。 指定の位置にメッシュ コントロールを適用する方法を学ぶ。 シャープ コーナーが応力の集中を生むようすを確認する。
Lesson
3 月 前
ENG
このシリーズでは、接触の階層、ピン コネクタ、スプリング コネクタについて扱います。 ピン コネクタに材料を適用して、強度を解析する。 スプリングの張力を表す予荷重を使用してスプリングを作成する。 接触改正を使用して、接触を制御する。
Lesson
3 月 前
ENG
荷重定義マネージャーを使用して、異なコンフィギュレーションの荷重を結合する方法を学ぶ。 異なる荷重条件の組み合わせが設計にどのように影響するかを知る。 活荷重/死荷重を組み合わせて解析を行う。 荷重を簡単に組み合わせるため方程式を使用する。
Lesson
3 月 前
ENG
ふく射、伝導、対流を考慮しながら、熱解析を行う方法を学びます。 伝導、対流、ふく射を考慮して、正確な熱解析の結果を得る。 温度と熱流速を測定する。
Lesson
3 月 前
ENG
Review the basic functionality of the SOLIDWORKS Dynamics module. Show activation of SOLIDWORKS Simulation Add-In. Review the available modules for specific dynamic load times.
Lesson
3 月 前
ENG
Setup initial dynamic simulation, solve and postprocess the results. Understand the importance of natural frequencies in dynamic simulations. Compare the dynamic and static results. Setup, run and postprocess a basic transient study Calculate a sufficient number of natural frequencies Use the mass participation factor to estimate a sufficient number of natural frequencies Run dynamic simulation for slow and fast forces, and compare their results
Lesson
3 月 前
ENG
Setup, run and postprocess a dynamic simulation with the base motion shock excitation. Understand the optimum mesh design, and get more familiar with the estimation of the minimum number of natural frequencies. Understand the basics of damping. Setup, run and postprocess a transient study Define base excitation shock load Use the mass participation factor to select a sufficient number of natural frequencies Optimize the finite element mesh for dynamic simulation Define structural damping Calculate the maximum time step Use remote mass to simplify the model
Lesson
3 月 前
ENG