从现有零件文件创建工程图、插入基础视图以及插入和操作尺寸和标注。 创建零件的基本工程图。 插入标准视图。 从模型将尺寸导入到工程图中。 更改尺寸。 演示模型与其工程图之间的关联性。
Lesson
5 月 前
ENG
FRA
DEU
JPN
CHS
在现有工程图视图中插入和操作尺寸。 从模型中导入尺寸、创建自定义从动尺寸以及在视图之间移动尺寸。 插入和操作驱动尺寸。 创建从动尺寸。 编辑尺寸的属性。
Lesson
1 年 前
ENG
JPN
Learn how to create different types of drawings and use their configuration settings to control various aspects. Create a new drawing and use Project Configuration to define its title block and mark. Create 2D cabinet layouts and place components. Generate drawings automatically based on inputs defined in their configuration managers.
Lesson
1 年 前
ENG
Learn about various drawing types that you can create in SOLIDWORKS Electrical. Understand how Wiring Line Diagrams can be used to create high-level synoptic drawings. Use Scheme drawings to create detailed designs using electrical symbols, components and wires. Create Mixed Scheme drawings to combine high-level and detailed schematic information on one page.
Lesson
1 年 前
ENG
Lesson
1 年 前
ENG
FRA
DEU
JPN
KOR
CHS
使用专用于装配体模型的工程图视图命令,包括断开的截面视图、交替位置视图和分解视图。 使用工程图视图属性来表示装配体配置。 创建断开的截面视图以显示装配体的内部部件。 使用现有配置或新配置创建交替位置视图。 创建装配体的工程图分解视图。
Lesson
2 年 前
ENG
JPN
了解更多 3D PDF 高级功能以与可能未安装 SOLIDWORKS 的下游生产明确沟通 3D 设计意图。 使用免费的 Adobe Reader 将 SOLIDWORKS 或 STEP 文件附加到 3D PDF。 插入多个图纸。 插入多个视口。 插入多个表。 显示实体轮廓和图示模式。 显示平板屏幕注释和表。 使用免费的 Adobe Reader 将文件附加到 3D PDF。
Lesson
2 年 前
ENG
本模块介绍用于在 3D 中定义模型的其他产品制造信息 (PMI) 工具。 应用参考尺寸并重用特征尺寸。 应用和自定义基准目标。 从设计库添加默认注释并添加 3D 注释。 创建并保存公差样式以便将来重用。 添加表面粗糙度和焊件符号。
Lesson
2 年 前
ENG
Get the models closer to the finished geometry by learning to modify, remove, combine, slice or replicate the 3D geometries. Use Boolean operations such as Union and Subtract. Reshape the edges of 3D geometries using Fillet Edges or Chamfer Edges with different options. Remove or split the material of 3D geometries using the Slice tool Replicate geometry in multiple instances throughout the design with Mirror 3D and Pattern 3D
Lesson
2 年 前
ENG
Define an accurate 2D profile or sketch using Geometric and/or Dimensional Constraints. Geometric Constraints create and uphold relationships between sketch entities while Dimensional Constraints specify distances or angles between the sketch entities. Assign Geometric Constraints such as Horizontal, Vertical, Coincident, Perpendicular, Parallel, Tangent, etc. Create Dimensional Constraints with numeric values with labels. Manage Dimensional Constraints for edit, delete and create user-defined parameters.
Lesson
2 年 前
ENG
Manipulate the 3D Model view properly to work on the geometry as intended. Use a variety of tools to enable rotating the model freely, updating the model view type and to add custom coordinates systems to get the right location and angle. View the 3D model at different angles such as Top, Bottom, Left and various isometric angles. Use the computer mouse or orbit command to freely pan, zoom and rotate the 3D model. Learn to view with different view types such as Wireframe, Hidden, Gouraud, Flat with Edges, etc. Setup custom coordinates systems with CCS defining based on a view or entity.
Lesson
2 年 前
ENG
Create some very complex 3D surfaces or geometries by defining a mesh with custom contours and numerous editable points for better control and design. Create basic primitive mesh shapes as a starting point to the design. Generate individual mesh faces using 3D Face tool. Control a network of mesh points by defining an outer perimeter with the Edge Mesh tool to fill it in. Use the 3D Mesh command allowing to define the location of every point in a mesh.
Lesson
2 年 前
ENG
Review a variety of 3D solid modeling tools exclusively for DraftSight Premium. Learn to use some common 3D tools to create simple primitive shapes and complex custom 3D geometries. Create 3D basic geometric forms such as Box, Wedge, Cylinder, Sphere, and Torus. Generate sketch-based or complex 3D shapes using Extrude, Revolve, Sweep, PolySolid, Push and Pull, and Loft.
Lesson
2 年 前
ENG
了解装配体中的 DimXpert 在装配体环境中如何定义整体大小和安装接口的尺寸和公差。 零件中的所有现有 DimXpert 功能在装配体中均受支持。 使用自动尺寸方案来定义安装孔间距。 使用位置和大小尺寸工具来定义孔大小与装配体特征尺寸和公差。 应用手动基本尺寸。 选择边线而非面以简化定义。 如同在 2D 工程图或草图中一样,每次移动鼠标时放置尺寸。 自动更新标识注解。 按特征控制框架显示坐标系。
Lesson
4 年 前
ENG