See how to import an assembly into SOLIDWORKS Treehouse, then make modifications to the assembly. Edit the custom properties, quantities, and suppression state of components in an assembly. Add a sub-assembly and parts to an assembly in SOLIDWORKS Treehouse. Open assemblies in SOLIDWORKS and review the modifications made in SOLIDWORKS Treehouse.
Lesson
4 years ago
ENG
Use SimulationXpress to analyze deformation of parts by applying fixtures and loads and defining materials. Vary load and/or pressure and customize materials. Learn to start and run SimulationXpress to analyze a single body part. Get comfortable working with items on design tree. Understand that pressure and/or load can be applied only to faces uniformly and constantly. Understand that custom materials properties must accurately represent part materials.
Lesson
3 years ago
ENG
JPN
Adjust the mesh density to adjust accuracy of a simulation. Run a simulation. Use the SimulationXpress wizard to view results such as the stress, displacement, deformation, and factor of safety of the simulation. Generate and save an eDrawings file or word document both of which display the results of the simulation. Adjust a mesh in a simulation. Run a simulation. Interpret the results of a simulation. Generate an eDrawing file or Microsoft Word document with the results.
Lesson
3 years ago
ENG
JPN
Based on analyses result, optimize factor of safety, maximum stress or maximum displacement value to an acceptable value. Vary a dimension within the range to try to meet the requirement. Make the design leaner or reduce material cost if it meets or exceeds the factor of safety. Achieve factor of safety through optimizing design. Use built-in automation capability to optimize a model. Run simulation.
Lesson
3 years ago
ENG
JPN
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
3 years ago
ENG
JPN
Observe stress analysis of a part using SimulationXpress to determine the deformation of the part under the influence of a load (force or pressure). Understand the assumptions and limitations of SimulationXpress. Observe stress analysis being performed on a part.
Lesson
3 years ago
ENG
JPN
Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Lesson
2 years ago
ENG
Explore the user interface of SOLIDWORKS Treehouse, an assembly structure planning tool for managers and designers alike. Tour the user interface to explore how to use SOLIDWORKS Treehouse. Build the structure for a new assembly complete with parts and drawings.
Lesson
2 years ago
ENG
Use selection tools to select one or more components in an assembly. Selection tools simplify the selection of components with similar properties or components in proximity to one another. Select components by dragging a box. Select components using a volume. Isolate components. Select components using conditions such as hidden, mated, or internal.
Lesson
2 years ago
ENG
JPN
Use drawing view commands that are specific to working with assembly models including broken out section views, alternate position views, and exploded views. Use drawing view properties to represent assembly configurations. Create a broken-out section view to show internal components of the assembly. Create an alternate position view using an existing or a new configuration. Create an exploded assembly drawing view.
Lesson
2 years ago
ENG
JPN
Utilize functions of the Costing Task Pane and CostingManager tab to analyze the cost of manufacturing a sheet metal part. Use the Costing Task Pane to evaluate materials costs. Learn how to customize material options for material and blank size. Use the Costing Manager to evaluate manufacturing costs. Learn how to customize cost values for manufacturing. Understand the values displayed in the Estimated Cost Per Part. Generate a cost analysis report.
Lesson
2 years ago
ENG
JPN
Learn the basics of SOLIDWORKS assembly design, by opening an assembly and adding components and mates. Open an existing assembly. Insert components into an assembly. Mate components using common types. Understand degrees of freedom and show assembly motion. Open components from the assembly. Hide and show components.
Lesson
1 year ago
ENG
FRA
DEU
JPN
KOR
CHS
Learn the basics of SOLIDWORKS drawings, and add drawing views, annotations, BOM tables, and balloons. Add drawing views using the View Palette. Create section and detail views. Insert model dimensions from the part. Add a Bill of Materials table. Automatically generate balloons.
Lesson
1 year ago
ENG
FRA
DEU
JPN
KOR
CHS
Insert and manipulate dimensions in existing drawing views. You import dimensions from the model, create custom driven dimension, and move dimensions between views. Insert and manipulate driving dimensions. Create driven dimensions. Edit the properties of a dimension.
Lesson
1 year ago
ENG
JPN
Use the various Mold Tools to prepare a part for injection molding, including scaling, split line, parting surface, and shut-off surfaces. After preparing the part, you create the core and cavity. Identifty the parting plane. Create a parting surface. Create shut-off surfaces. Create mold body, core and cavity.
Lesson
1 year ago
ENG
JPN
Utilize functions of the Costing Task Pane and CostingManager tab to analyze the cost of manufacturing a machined part. Use the Costing Task Pane to evaluate materials costs. Learn how to customize material options for material and stock size. Use the Costing Manager to evaluate manufacturing costs. Learn how to customize cost values for manufacturing. Understand the values displayed in the Estimated Cost Per Part. Learn how to apply a markup or discount. Generate a cost analysis report.
Lesson
1 year ago
ENG
JPN
Automatically create a piping route between connections. You choose from one of many possible routes. You can specify that the route goes around model geometry or through reference geometry. Drag and drop flanges. Create a new piping route. Create route geometry using auto-route. View multiple route solutions. Evaluate route solutions.
Lesson
1 year ago
ENG
JPN
Create a sheet metal part of constant wall thickness using sheet metal features. Explore the fundamentals of creating sheet metal parts using the flange method. Create a base flange in a sheet metal part. Understand the use of gauge tables and sheet metal options. Flatten a sheet metal part.
Lesson
1 year ago
ENG
JPN
Create a weldment frame from a series of layout sketches. The weldment environment uses standard weldment profiles to define the type of structural members in the weldment. Members of the same type and size are created in one feature. Create a weldment frame. Insert structural members. Relocate the profile sketch. Change corner treatments.
Lesson
1 year ago
ENG
JPN
Model parts in the context of an assembly, using references to other components to complete the design. The design intent for new parts (sizes of features, placement of components in the assembly, etc.) comes from other components in the assembly. Build a virtual part in the context of an assembly by employing Top-Down assembly modeling techniques. Create features in the assembly context by referencing geometry in mating parts. Understand InPlace mates and external references. Identify external references in the FeatureManager design tree.
Lesson
1 year ago
ENG
JPN
Install and use the testing software that you use to take any of the SOLIDWORKS certification exams. Download the Tester Pro Client software. Explore the user interface and critical aspects of the test taking experience.
Lesson
1 year ago
ENG
Explore the part modeling portion of the CSWA exam. Review the techniques used to model the part in the sample CSWA exam. Review the sample CSWA exam.
Lesson
1 year ago
ENG
Learn the basics of SOLIDWORKS design, and build a SOLIDWORKS feature-based, parametric, solid model using sketches and features. Create a new sketch. Sketch geometry like lines and circles. Add relations and dimensions. Revolve and extrude sketches to create features. Shell to create a thin walled model. Test the design with dimensional changes.
Lesson
8 months ago
ENG
FRA
DEU
JPN
KOR
CHS
Please Note in Presentation 1 (1:34): The automatic voucher redemption system is currently disabled, but our team can still help you manually. Just email certification@solidworks.com with the information below to receive access to your free vouchers. We will need: The email address you use for your certification account Your company name The SOLIDWORKS serial number on subscription that you are using (or the 3DEXPERIENCE role that you are using) The exams (up to 3) you would like to take this semester ------------------------------------------------------------------------------- Navigate the SOLIDWORKS Certification Center to view your completed certificates, review exam results, and much more. Explore the tools available in the SOLIDWORKS Certification Center. Review user settings. Search for certified users and certified resellers and training centers.
Lesson
6 months ago
ENG