기존 파트 파일에서 도면을 작성하고, 기본 뷰를 삽입하며, 치수 및 속성 표시기를 삽입 및 조정합니다. 파트의 기본 도면을 작성합니다. 표준 뷰를 삽입합니다. 모델의 치수를 도면으로 불러옵니다. 치수를 변경합니다. 모델과 도면 간의 연관성을 보여줍니다.
Lesson
5 개월 전
ENG
FRA
DEU
JPN
CHS
범위와 고급 속성을 포함해 기본, 경사, 오프셋, 부분 또는 반 단면도를 작성합니다. 여러 유형의 단면도를 도면에 추가합니다. 단면도 속성을 정의합니다. 단면도를 수정합니다.
Lesson
1 년 전
ENG
JPN
기존 도면뷰에 치수를 삽입하고 조작합니다. 모델에서 치수를 불러오고, 사용자 정의 구속 치수를 작성하며, 뷰 간에 치수를 이동할 수 있습니다. 구속하는 치수를 삽입하고 조작합니다. 구속된 치수를 작성합니다. 치수의 속성을 편집합니다.
Lesson
1 년 전
ENG
JPN
사용자 정의 노트, 기하 공차, 블록 등의 주석을 기존 도면뷰에 삽입합니다. 주석과 기호를 만듭니다. 지오메트리와 노트로 블록을 작성합니다. 블록을 파일로 저장합니다. 블록을 도면에 삽입합니다.
Lesson
1 년 전
ENG
JPN
Lesson
1 년 전
ENG
FRA
DEU
JPN
KOR
CHS
부분 단면도, 보조 위치도, 분해도 등 어셈블리 모델 작업과 관련한 도면뷰 명령을 사용합니다. 어셈블리 설정을 나타내는 도면뷰 속성을 사용합니다. 어셈블리의 내부 부품을 나타내는 부분 단면도를 작성합니다. 기존 또는 새로운 설정을 사용하여 보조 위치도를 만듭니다. 어셈블리 분해도를 작성합니다.
Lesson
2 년 전
ENG
JPN
Get the models closer to the finished geometry by learning to modify, remove, combine, slice or replicate the 3D geometries. Use Boolean operations such as Union and Subtract. Reshape the edges of 3D geometries using Fillet Edges or Chamfer Edges with different options. Remove or split the material of 3D geometries using the Slice tool Replicate geometry in multiple instances throughout the design with Mirror 3D and Pattern 3D
Lesson
2 년 전
ENG
Define an accurate 2D profile or sketch using Geometric and/or Dimensional Constraints. Geometric Constraints create and uphold relationships between sketch entities while Dimensional Constraints specify distances or angles between the sketch entities. Assign Geometric Constraints such as Horizontal, Vertical, Coincident, Perpendicular, Parallel, Tangent, etc. Create Dimensional Constraints with numeric values with labels. Manage Dimensional Constraints for edit, delete and create user-defined parameters.
Lesson
2 년 전
ENG
Manipulate the 3D Model view properly to work on the geometry as intended. Use a variety of tools to enable rotating the model freely, updating the model view type and to add custom coordinates systems to get the right location and angle. View the 3D model at different angles such as Top, Bottom, Left and various isometric angles. Use the computer mouse or orbit command to freely pan, zoom and rotate the 3D model. Learn to view with different view types such as Wireframe, Hidden, Gouraud, Flat with Edges, etc. Setup custom coordinates systems with CCS defining based on a view or entity.
Lesson
2 년 전
ENG
Create some very complex 3D surfaces or geometries by defining a mesh with custom contours and numerous editable points for better control and design. Create basic primitive mesh shapes as a starting point to the design. Generate individual mesh faces using 3D Face tool. Control a network of mesh points by defining an outer perimeter with the Edge Mesh tool to fill it in. Use the 3D Mesh command allowing to define the location of every point in a mesh.
Lesson
2 년 전
ENG
Review a variety of 3D solid modeling tools exclusively for DraftSight Premium. Learn to use some common 3D tools to create simple primitive shapes and complex custom 3D geometries. Create 3D basic geometric forms such as Box, Wedge, Cylinder, Sphere, and Torus. Generate sketch-based or complex 3D shapes using Extrude, Revolve, Sweep, PolySolid, Push and Pull, and Loft.
Lesson
2 년 전
ENG