Review a variety of 3D solid modeling tools exclusively for DraftSight Premium. Learn to use some common 3D tools to create simple primitive shapes and complex custom 3D geometries. Create 3D basic geometric forms such as Box, Wedge, Cylinder, Sphere, and Torus. Generate sketch-based or complex 3D shapes using Extrude, Revolve, Sweep, PolySolid, Push and Pull, and Loft.
Lesson
2 лет назад
ENG
Create some very complex 3D surfaces or geometries by defining a mesh with custom contours and numerous editable points for better control and design. Create basic primitive mesh shapes as a starting point to the design. Generate individual mesh faces using 3D Face tool. Control a network of mesh points by defining an outer perimeter with the Edge Mesh tool to fill it in. Use the 3D Mesh command allowing to define the location of every point in a mesh.
Lesson
2 лет назад
ENG
Manipulate the 3D Model view properly to work on the geometry as intended. Use a variety of tools to enable rotating the model freely, updating the model view type and to add custom coordinates systems to get the right location and angle. View the 3D model at different angles such as Top, Bottom, Left and various isometric angles. Use the computer mouse or orbit command to freely pan, zoom and rotate the 3D model. Learn to view with different view types such as Wireframe, Hidden, Gouraud, Flat with Edges, etc. Setup custom coordinates systems with CCS defining based on a view or entity.
Lesson
2 лет назад
ENG
Define an accurate 2D profile or sketch using Geometric and/or Dimensional Constraints. Geometric Constraints create and uphold relationships between sketch entities while Dimensional Constraints specify distances or angles between the sketch entities. Assign Geometric Constraints such as Horizontal, Vertical, Coincident, Perpendicular, Parallel, Tangent, etc. Create Dimensional Constraints with numeric values with labels. Manage Dimensional Constraints for edit, delete and create user-defined parameters.
Lesson
2 лет назад
ENG
Get the models closer to the finished geometry by learning to modify, remove, combine, slice or replicate the 3D geometries. Use Boolean operations such as Union and Subtract. Reshape the edges of 3D geometries using Fillet Edges or Chamfer Edges with different options. Remove or split the material of 3D geometries using the Slice tool Replicate geometry in multiple instances throughout the design with Mirror 3D and Pattern 3D
Lesson
2 лет назад
ENG
Использование команд чертежного вида, предназначенных для работы с моделями сборок, в том числе виды вырыва детали, наложенные виды и виды с разнесенными частями. Использование свойств чертежного вида для представления конфигурации сборки. Создание вида вырыва детали для просмотра внутренних компонентов сборки. Создание наложенного вида с помощью существующей или новой конфигурации. Создание вида чертежа сборки с разнесенными частями.
Lesson
2 лет назад
ENG
JPN
Вставка примечаний в существующие чертежные виды, в том числе пользовательские заметки, допуски отклонения формы и блоки. Создание примечаний и обозначений. Создание блоков из геометрии и заметок. Сохранение блока в файле. Вставка блока в чертеж.
Lesson
1 год назад
ENG
JPN
Вставка размеров и управление ими в существующих чертежных видах. Импорт размеров из модели, создание пользовательских управляемых размеров и перемещение размеров между видами. Вставка управляющих размеров и управление ими. Создание управляемых размеров. Редактирование свойств размера.
Lesson
1 год назад
ENG
JPN
Создание основного, выровненного, смещенного и частичного разреза, включая область действия и дополнительные свойства. Добавление нескольких типов разрезов в чертеж. Определение свойств разреза. Изменение разрезов.
Lesson
1 год назад
ENG
JPN
Создание чертежа из существующего файла детали, вставка основных видов, а также вставка размеров и условных обозначений и управление ими. Создание основного чертежа детали. Вставка стандартных видов. Импорт размеров из модели в чертеж. Внесение изменений в размер. Демонстрация связей между моделью и ее чертежами.
Lesson
5 мес. назад
ENG
FRA
DEU
JPN
CHS