An introduction to the many types view manipulation for parts, assemblies, and drawings. Explore the different types of views. Understand how to manipulate views using menus, the keyboard, mouse, and reference triad.
Lesson
2 months ago
ENG
FRA
DEU
JPN
CHS
Use the Physical Dynamics options when moving components to allow realistic interaction between assembly components. Physical dynamics identifies collisions between faces and allows components to push one another when they come into contact. Understand options within the Move Component command. Use the Physical Dynamics option to simulate interaction between components being moved. Understand the limitations of using Physical Dynamics versus a Motion Study. Learn how to troubleshoot issues when using the physical dynamics option.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Use the Interference Detection tool to identify any overlap between parts in an assembly. Clearance between parts can also be detected using the Clearance Verification tool. Use the Interference Detection tool to identify interferences between assembly components. Explore the options available within the Interference Detection tool. Use the Clearance Verification tool to identify clearances between assembly components. Explore the options available with the Clearance Verification tool.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the sketch tools Convert Entities and Offset Entities to reference sketch entities and model geometry to create new sketch entities. If the original geometry changes, then the converted and offset entities also change. Create converted entities into a new sketch. Create offset entities. Create a slot using offset entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations to an assembly and show two versions of its components. Also, explore the advanced options of configuration properties. Use the ConfigurationManager to add configurations to an assembly. Use the advanced options of the configuration properties to control new components and mates. Create two versions of the assembly to represent different available components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Global variables declare a named value that dimensions can be set equal to or that can be used in equations. Equations are mathematical expressions that can define dimension values as well as relate dimensions to each other. Create global variables. Use global variables to set fillet features to be equal radii. Use global variables in equations. Use equations to control dimension values.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
An introduction to the basics of SOLIDWORKS and the user interface. Explore the definition of SOLIDWORKS. Understand how Design Intent is used. Explore the SOLIDWORKS user interface. Access the SOLIDWORKS Options.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a pattern of one or more features or bodies in one or two linear directions. Unwanted instances can be left out of the pattern, and spacing and other dimensions may be varied. Create bi-directional linear patterns of existing features. Skip instances in a pattern. Vary parameters of pattern instances.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Learn the basics of SOLIDWORKS design, and build a SOLIDWORKS feature-based, parametric, solid model using sketches and features. Create a new sketch. Sketch geometry like lines and circles. Add relations and dimensions. Revolve and extrude sketches to create features. Shell to create a thin walled model. Test the design with dimensional changes.
Lesson
8 months ago
ENG
FRA
DEU
JPN
KOR
CHS
Learn the basics of SOLIDWORKS drawings, and add drawing views, annotations, BOM tables, and balloons. Add drawing views using the View Palette. Create section and detail views. Insert model dimensions from the part. Add a Bill of Materials table. Automatically generate balloons.
Lesson
1 year ago
ENG
FRA
DEU
JPN
KOR
CHS
Learn the basics of SOLIDWORKS assembly design, by opening an assembly and adding components and mates. Open an existing assembly. Insert components into an assembly. Mate components using common types. Understand degrees of freedom and show assembly motion. Open components from the assembly. Hide and show components.
Lesson
1 year ago
ENG
FRA
DEU
JPN
KOR
CHS