Define default tolerance values to ensure manufactured product falls within specification as drawings often don't have explicit tolerance values associated with them: Manually edit tolerance value. Set default tolerances.
Lesson
4 년 전
ENG
Use the New Avoid Area command on an operation to designate an area not to be machined. Create avoid areas on a face mill operation using the 2D sketches in the part. Examine the avoid areas by expanding the face mill operation.
Lesson
4 년 전
ENG
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 년 전
ENG
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 년 전
ENG
Run a toolpath simulation to examine material removal. Run a toolpath simulation. Control the toolpath simulation. Utilize display options.
Lesson
4 년 전
ENG
Reorder operations manually to optimize the machining workflow. Perform manual operation reordering via drag and drop. Reorder multiple features using multiselect.
Lesson
4 년 전
ENG
Use the Sort Operations command to automatically reorder operations. Examine sort operations process options. Set sort by order for operation type.
Lesson
4 년 전
ENG
Use the Edit Definition command to modify roughing operations. Change pocketing pattern. Set side parameters. Set depth parameters.
Lesson
4 년 전
ENG
Duplicate dimensions are often grouped together on a drawing but might need to be inspected separately: Extract and identify the quantity. Change the quantity. List characteristics separately.
Lesson
4 년 전
ENG
It is important, when creating an inspection report, that the items are ballooned in the correct order. Also numbering schemes can help quickly identify characteristics: Change the order of the characteristics. Define balloon sequences. Manually change a balloon number.
Lesson
4 년 전
ENG
Use the Edit Definition command to optimize a roughing operation to increase toolpath efficiency and reduce machine cycle time. Modify the optimization of a rough mill operation. Set optimization method to shortest path. Set start point options. Simulate the toolpath to examine results.
Lesson
4 년 전
ENG
SustainabilityXpress는 모델의 탄소 배출량, 전체 수명주기의 에너지 소모, 대기 산성화, 수질 부영양화를 예측합니다. 사용된 재질, 제조 공정, 제조 지역, 사용 지역, 제품 수명 종료 등의 정보를 분석합니다. 각기 다른 재질과 제조 공정이 설계에 미치는 환경적 영향을 살펴봅니다. 운송 및 제품 수명 종료에 대한 값을 결정하기 위해 제품 사용 정보를 지정합니다. 환경 영향 차트에 표시된 정보를 이해합니다. 변경 추세를 비교해볼 수 있도록 환경 영향 기준을 설정하는 방법을 학습합니다. Sustainability 출력 보고서를 생성합니다.
Lesson
3 년 전
ENG
JPN
기존 배관 어셈블리 템플릿을 사용하여 사용자 정의 배관 어셈블리 템플릿을 작성, 편집 및 저장합니다. 사용자 정의 배관 어셈블리 템플릿을 작성하고 저장합니다. 사용자 정의 템플릿으로 새 배관을 만들 때 기본값으로 사용하게 될 다른 제도 표준과 단위, 기타 문서 속성을 지정합니다.
Lesson
3 년 전
ENG
JPN
바로가기 키와 트라이어드를 사용하여 줄어드는 유출구 티를 기존 배관에 삽입하고 방향을 지정합니다. 자동 배관 도구로 파이프를 연결하여 추가 피처를 생성합니다. 기존 배관에 일직선 이음쇠를 추가합니다. 바로가기 키와 트라이어드를 사용하여 일직선 이음쇠의 방향과 위치를 지정합니다.
Lesson
3 년 전
ENG
JPN
라이브러리에서 직교 튜브와 표준 이음쇠를 사용하여 기존 부품을 연결합니다. 자동 배관 피처를 사용하여 자동으로 배관을 생성합니다. 어셈블리에 표준 이음쇠를 추가합니다. 피처 사이에 직교 배관을 작성합니다.
Lesson
3 년 전
ENG
JPN
Review the difference between small displacement linear, and large displacement nonlinear analyses. Introduce the concept of time curves, and discuss basic options. Solve small displacement linear analysis to demonstrate inaccurate solution. Define a nonlinear simulation study. Use time curves to control variation of the nonlinear loading. Use fixed increment stepping, and autostepping stepping procedures to solve the nonlinear problem. Postprocess results of the nonlinear simulation. Compare results from nonlinear studies with various setup parameters.
Lesson
3 년 전
ENG
Introduction to the force control and displacement control methods in nonlinear module. Experience and resolve solution instabilities when solving nonlinear problems. Define nonlinear study boundary conditions and loads. Stabilize force control method to arrive to a final solution. Solve the problem using the displacement control method. Adjust boundary conditions for the displacement control method. Compare nonlinear results from the force control, and the displacement control methods.
Lesson
3 년 전
ENG
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
Lesson
3 년 전
ENG
Use the Post Process command to generate NC code from the parts toolpath and operation information. Select the post processor within the machine dialog. Run the Post Process command and set a file name and location for saving. Generate the NC code and select the option to Open G-Code in the SOLIDWORKS CAM NC Editor. Review the NC code within the SOLIDWORKS CAM NC Editor.
Lesson
2 년 전
ENG
블록은 스케치 요소와 치수를 함께 그룹화하여 스케치에서 하나로 이동할 수 있습니다. 레이아웃 스케치와 함께 어셈블리 스케치에서 바로 전체 어셈블리로 이동할 수 있습니다. 블록을 작성, 편집, 저장합니다. 블록을 사용하여 어셈블리의 레이아웃 스케치를 작성합니다. 기존 블록을 기반으로 어셈블리 부품을 생성합니다.
Lesson
2 년 전
ENG
JPN
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Lesson
2 년 전
ENG
Use the Edit Definition command to modify contouring operation leadin and leadout parameters. Modify leadin type. Modify leadin amount and overlap. Modify arc radius and arc angle.
Lesson
2 년 전
ENG
Use Interactive Feature Regognition (IFR) to manually create a machinable feature. Create a corner slot feature using the 2.5 axis feature command. Review geometry selection options to define the feature. Set the feature end condition. Modify the machining strategy for the feature.
Lesson
2 년 전
ENG
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
Lesson
2 년 전
ENG