SustainabilityXpress estimates a models carbon footprint, energy consumed during its lifecycle, Air acidification, and water eutrophication. Information is analyzed such as the material used, maufcturing process, manufacturing region, use region, and end of life. Explore how different materials and manufacturing processes affect the environmental impact for a design Specify product use information to determine values for transportation and end of life. Understand the information displayed in the Environmental Impact charts. Learn how to set an environmental impact baseline to compare changes to. Generate a report of the Sustainability output.
Lesson
3 years ago
ENG
JPN
Create, edit and save custom routing assembly templates using an existing routing assembly template. Create and save a custom routing assembly template. Specify different drafting standards, units, and other document properties as the defaults that will be used when you create a new route with the custom template.
Lesson
3 years ago
ENG
JPN
Insert a reducing outlet tee into an existing route and orient it using keyboard shortcuts and a triad. Use the Auto Route tool to connect the pipes resulting from the additional feature. Add in-line fittings to existing routes. Use keyboard shortcuts and the triad to orient and position an in-line fitting.
Lesson
3 years ago
ENG
JPN
Connect existing components using orthogonal tubes and standard fittings from the library. Use the Auto Route feature to automatically generate routes Add standard fittings to assemblies. Create orthogonal routes between features.
Lesson
3 years ago
ENG
JPN
Blocks group sketch entities and dimensions together so that they move as one in a sketch. Together with a layout sketch, you can go directly from an assembly sketch to the full assembly. Create, edit and save blocks. Create a layout sketch of an assembly using blocks. Build assembly components based on the existing blocks.
Lesson
2 years ago
ENG
JPN
Create and use a custom route specification template using the Routing Library Manager. Specify size and schedule of pipe segments. Select pipes and elbows from the Piping and Tubing Database. Insert route components with route specification templates.
Lesson
2 years ago
ENG
JPN
Edit a pipe route relative to the pipe\'s geometry (either centerline or external surface). Coverings can also be added to pipes. Create a route relative to an existing surface. Add coverings to pipes. Change where dimensions are assigned relative to the pipe (centerline or external surface).
Lesson
2 years ago
ENG
JPN
This lesson contains exercises so you can improve your proficiency with Sketching before taking the Certified SOLIDWORKS Associate (CSWA) exam.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the first of two lessons containing these exercises.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the second of two lessons containing these exercises.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Assemblies before taking the Certified SOLIDWORKS Associate (CSWA) exam.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
Lesson
2 years ago
ENG
This lesson contains exercises so you can improve your proficiency with Additional Tools before taking the Certified SOLIDWORKS Associate (CSWA) exam. The additional tools include reference geometry, configurations, making changes to a model, and more. There are 10 practice exercises for Additional Tools so this is the second of two lessons containing these exercises.
Lesson
2 years ago
ENG
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Lesson
2 years ago
ENG
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Lesson
2 years ago
ENG
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Lesson
2 years ago
ENG
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Lesson
2 years ago
ENG
Explore the basic concepts of creating an animation in SOLIDWORKS. Use the Animation Wizard and MotionManager to create animations that rotate, explode, and collapse an assembly. Create an animation. Explore the MotionManager pane. Use the Animation Wizard to rotate, explode, and collapse an assembly.
Lesson
2 years ago
ENG
JPN
Create an animation to simulate a cable winding off one reel onto another reel. Use a helix, reference plane, and sweep to model the cable. Define equations to modify the geometry and simulate the winding cable. Create an animation. Use a helix, reference planes, and a sweep feature to model a cable. Define equations to modify the geometry. Change the value of a mate over time using the MotionManager.
Lesson
2 years ago
ENG
JPN
Create a variable pitch helix that you use as the path for a sweep feature. Learn about the options you have to define the shape of the variable pitch helix. Create a variable pitch helix. Position the profile and path sketches properly for a sweep feature. Create a plane normal to a curve at a point.
Lesson
2 years ago
ENG
JPN
Apply a setback fillet to vertices where three or more edges meet. Setback fillets can model cleaner looking blends at the vertices. Add setback values to vertices where three or more edges meet.
Lesson
2 years ago
ENG
JPN
Create 3D sketches using the default coordinate system of the model to orient the sketch entities. Add relations and dimensions to constrain the size of the sketch entities. Use the on-screen feedback when sketching. Use planes to orient 3D sketch entities. Change the sketch plane by pressing the Tab key or by using a plane or planar face. Display multiple viewports to modify 3D sketch entities.
Lesson
2 years ago
ENG
JPN
Create a variable radius fillet where you set the radius value at selected vertices and control points. Also, you can set the radius to zero to force the fillet to converge to a point. Create a fillet where the radius varies along the selected edge. Modify the radius value at vertices or control points. Create zero radius fillets where the fillet must converge to a point.
Lesson
2 years ago
ENG
JPN
Use the loft feature or boundary feature to create a transition that blends well with the surrounding geometry. Set the tangency options for a boundary feature to match the curvature of the neighboring faces. Join two portions of a model that have different profiles. Examine the options for building a boundary feature.
Lesson
2 years ago
ENG
JPN