了解如何使用子建模来分析大型装配体的一部分以节省时间并获得更准确的结果。 从父算例创建子模型算例。 了解载荷如何自动转移到子模型算例中。 节省时间和计算资源的同时保持准确的结果。 使用 eDrawings 来保存结果。
Lesson
3 月 前
ENG
Review the basic functionality of the SOLIDWORKS Dynamics module. Show activation of SOLIDWORKS Simulation Add-In. Review the available modules for specific dynamic load times.
Lesson
3 月 前
ENG
了解如何在考虑辐射、传导和对流的同时进行热分析。 通过考虑传导、对流和辐射的影响来获得准确的热结果。 测量温度和热通量。
Lesson
3 月 前
ENG
了解如何使用负载案例管理器组合不同配置中的荷载。 了解不同载荷条件的组合效果如何影响您的设计。 将动载和恒载组合到您的分析中。 使用方程式可以方便地组合载荷。
Lesson
3 月 前
ENG
本系列介绍接触层次结构、引脚连接器和弹簧连接器。 将材料应用到引脚连接器以分析强度。 使用预载创建弹簧以考虑弹簧张力。 使用接触层次结构来控制接触。
Lesson
3 月 前
ENG
本模块通过观察元素大小如何影响应力、应变和位移介绍网格收敛的概念。 了解更改全局元素大小将如何影响结果。 了解如何在指定位置应用网格控制。 观察锐圆角如何产生应力集中。
Lesson
3 月 前
ENG
了解如何使用疲劳模块在反复的载荷条件下分析结构。 将 S-N 曲线应用到材料以进行反复的载荷分析。 应用修正因子以获得更切合实际的结果。 查看损坏图解以分析材料寿命。
Lesson
3 月 前
ENG
本系列介绍接触、螺栓和远程载荷的概念。 分析装配体内的接触。 通过排除可以使用连接器和远程载荷表示的零件来简化模型。
Lesson
3 月 前
ENG
本模块介绍 Simulation 用户界面并指导您完成简单零件的设置流程。然后,将运行模拟并分析结果。 了解 Simulation 用户界面。 应用夹具、材料和载荷。 运行模拟并分析模型的应力和位移。
Lesson
3 月 前
ENG
了解在分析装配体结构的固有振动时如何使用接触。 分析装配体结构的固有频率形状和模式。 测试各种接触条件以分析结构刚度。
Lesson
1 年 前
ENG
了解如何使用壳体来对薄壁结构建模。 使用壳体管理器在薄壁结构上创建壳体。 应用对称夹具以减少计算工作量。
Lesson
1 年 前
ENG
Examine the motion of a catapult as it is loaded and throws a projectile. Add solid bodies contact, add a spring and apply friction. Determine torque required to rotate the crank and load the catapult. Determine the displacement of the loading spring. Study the effect of contact friction on the motion of the projectile.
Lesson
2 年 前
ENG
通过浏览所有模块了解 SOLIDWORKS Simulation 产品套件。 使用 SOLIDWORKS Flow 分析热传递和流体流动。 使用 Sustainability 减小设计的环境影响。 使用 SOLIDWORKS Simulation 了解应力-应变分析。 使用 SOLIDWORKS Motion 分析刚性几何体动力学。 使用 SOLIDWORKS Plastics 查看注塑零件的填充阵列。
Lesson
2 年 前
ENG
Simulate a mechanism placing an object into a box and a cover on the box. Apply servo motors. Add proximity sensors. Create and run event based motion study.
Lesson
2 年 前
ENG
Generate a cam profile based on an input follower displacement from a data set. Define a motion of a follower using Data Points. Generate a cam profile using Trace Path. Verify the generated cam profile.
Lesson
2 年 前
ENG
了解如何通过改变模型尺寸来优化设计以减轻模型重量。 应用参数和约束以优化设计使其满足您的目标。 了解如何在 Simulation 中使用设计算例。
Lesson
3 年 前
ENG
Review the basic functionality of the SOLIDWORKS Nonlinear module. Show activation of SOLIDWORKS Simulation Add-In. Learn three basic nonlinear phenomena in engineering calculations. Review of control methods available in the module. Review of basic material models available in the module.
Lesson
3 年 前
ENG