Define default tolerance values to ensure manufactured product falls within specification as drawings often don't have explicit tolerance values associated with them: Manually edit tolerance value. Set default tolerances.
Lesson
4 年 前
ENG
Use the New Avoid Area command on an operation to designate an area not to be machined. Create avoid areas on a face mill operation using the 2D sketches in the part. Examine the avoid areas by expanding the face mill operation.
Lesson
4 年 前
ENG
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 年 前
ENG
Create operation plans to define the tools and operations for machining the parts features. Generate operation plans for all machinable features. Review the operations in the CAM Operation Tree. Examine an individual operation strategy, tool selection and operation information. Review and resolve operation warnings.
Lesson
4 年 前
ENG
Run a toolpath simulation to examine material removal. Run a toolpath simulation. Control the toolpath simulation. Utilize display options.
Lesson
4 年 前
ENG
Reorder operations manually to optimize the machining workflow. Perform manual operation reordering via drag and drop. Reorder multiple features using multiselect.
Lesson
4 年 前
ENG
Use the Sort Operations command to automatically reorder operations. Examine sort operations process options. Set sort by order for operation type.
Lesson
4 年 前
ENG
Use the Edit Definition command to modify roughing operations. Change pocketing pattern. Set side parameters. Set depth parameters.
Lesson
4 年 前
ENG
Duplicate dimensions are often grouped together on a drawing but might need to be inspected separately: Extract and identify the quantity. Change the quantity. List characteristics separately.
Lesson
4 年 前
ENG
It is important, when creating an inspection report, that the items are ballooned in the correct order. Also numbering schemes can help quickly identify characteristics: Change the order of the characteristics. Define balloon sequences. Manually change a balloon number.
Lesson
4 年 前
ENG
Use the Edit Definition command to optimize a roughing operation to increase toolpath efficiency and reduce machine cycle time. Modify the optimization of a rough mill operation. Set optimization method to shortest path. Set start point options. Simulate the toolpath to examine results.
Lesson
4 年 前
ENG
SustainabilityXpress 可以估算模型所产生的碳足迹、生命周期中所消耗的能量、空气酸化和水体富营养化。 将分析诸如已使用材料、制造流程、制造区域、使用区域和寿命终结等信息。 了解不同的材料和制造流程如何影响设计的环境影响。 指定产品使用信息以确定运输和寿命终结值。 了解环境影响图表中显示的信息。 了解如何设置环境影响基准以将更改与其进行比较。 生成 Sustainability 输出报告。
Lesson
3 年 前
ENG
JPN
使用现有步路装配体模板创建、编辑和保存自定义步路装配体模板。 创建和保存自定义步路装配体模板。 指定不同的制图标准、单位和其他文档属性以将其作为用自定义模板创建新的传递线路时所使用的默认值。
Lesson
3 年 前
ENG
JPN
将异径三通接头插入到现有传递线路并使用键盘快捷方式和三重轴将其定向。 使用自动步路工具连接来自其他特征的管道。 将直排接头添加到现有传递线路。 使用键盘快捷方式和三重轴来定向和定位直排接头。
Lesson
3 年 前
ENG
JPN
使用库中的正交管筒和标准接头连接现有部件。 使用自动步路特征来自动生成传递线路。 将标准接头添加到装配体。 在特征之间创建正交传递线路。
Lesson
3 年 前
ENG
JPN
Review the difference between small displacement linear, and large displacement nonlinear analyses. Introduce the concept of time curves, and discuss basic options. Solve small displacement linear analysis to demonstrate inaccurate solution. Define a nonlinear simulation study. Use time curves to control variation of the nonlinear loading. Use fixed increment stepping, and autostepping stepping procedures to solve the nonlinear problem. Postprocess results of the nonlinear simulation. Compare results from nonlinear studies with various setup parameters.
Lesson
3 年 前
ENG
Introduction to the force control and displacement control methods in nonlinear module. Experience and resolve solution instabilities when solving nonlinear problems. Define nonlinear study boundary conditions and loads. Stabilize force control method to arrive to a final solution. Solve the problem using the displacement control method. Adjust boundary conditions for the displacement control method. Compare nonlinear results from the force control, and the displacement control methods.
Lesson
3 年 前
ENG
Introduction to the material nonlinearity, namely metal plasticity. Effect of mesh quality on the quality of the numerical stress results. Solve problem with linear small displacement solution and identify a need for the nonlinear solution due to high stress. Define nonlinear study boundary conditions and loads. Define nonlinear material model with von Mises plasticity. Use simplified bi-linear plasticity material model. Review the stress and displacement results at various times. Study effect of mesh quality on the quality of the stress results. Use the mesh sectioning feature to review stress distribution within the bodies.
Lesson
3 年 前
ENG
Use the Post Process command to generate NC code from the parts toolpath and operation information. Select the post processor within the machine dialog. Run the Post Process command and set a file name and location for saving. Generate the NC code and select the option to Open G-Code in the SOLIDWORKS CAM NC Editor. Review the NC code within the SOLIDWORKS CAM NC Editor.
Lesson
2 年 前
ENG
块将草图实体和尺寸分组到一起以使其在草图中作为整体移动。 您可将块与布局草图一起使用以直接从装配体草图转到完整装配体。 创建、编辑和保存块。 使用块创建装配体的布局草图。 基于现有块构建装配体部件。
Lesson
2 年 前
ENG
JPN
Use the edit definition command to modify contouring (finish) operations. Review contour operation parameters. Review side parameters settings. Review feeds and speeds tab.
Lesson
2 年 前
ENG
Use the Edit Definition command to modify contouring operation leadin and leadout parameters. Modify leadin type. Modify leadin amount and overlap. Modify arc radius and arc angle.
Lesson
2 年 前
ENG
Use Interactive Feature Regognition (IFR) to manually create a machinable feature. Create a corner slot feature using the 2.5 axis feature command. Review geometry selection options to define the feature. Set the feature end condition. Modify the machining strategy for the feature.
Lesson
2 年 前
ENG
Use the Combine Operations and Link Operation commands to combine like operation types. Combine operations for all like rough and contour mill operations. Drag and drop a hole feature from one center drill operation to a like center drill operation. Link like contour mill operations between two different setups.
Lesson
2 年 前
ENG