Add draft to cast and molded parts. Understand the various types of draft features you can create. Perform Draft Analysis to determine which faces need draft added to them.
Lesson
3 months ago
ENG
Create rounded or beveled edges using fillets or chamfers, respectively. Understand general filleting rules to facilitate better modeling practices. Create and understand some of the options for constant radius fillets. Create and understand some of the options for chamfer features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Move a sketch profile along a path to create a swept feature. Use sketch relations to create a sketch path relative to other sketches in the part. Understand some of the basic options for swept features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Revolve sketch profiles about an axis to add or remove material. Create sketches, with the proper entities, relations, and dimensions that facilitate revolved features. Understand some of the options for revolved features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Extend sketch profiles to create extruded bosses to add material and extruded cuts to remove material. Use sketch relations and dimensions to define sketch profiles. Understand some of the options for extruded features. Add material with an extruded boss and remove material with an extruded cut.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What\'s Wrong dialog. Edit the plane used by a sketch.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use minimal sketch geometry to create rib features that reinforce thin walled parts. Understand the various options for creating a Rib feature. Use simple and complex sketches to create rib features.
Lesson
1 year ago
ENG
Hollow out solid bodies using the Shell feature. Apply different wall thicknesses to selected faces. Select multiple faces to be removed in the shelling operation. Understand how the shelling operation affects filleted and rounded edges.
Lesson
1 year ago
ENG
Use several direct editing techniques for working with imported geometry using surfacing tools. Explore the Delete Face tool, the Delete Hole command, and the Untrim Surface tool. Use the Delete Face tool to remove an unwanted imported geometry feature. Use Delete Hole and Untrim Surface to remove an unwanted imported geometry feature. Convert a surface body into a solid body using the Thicken command.
Lesson
1 year ago
ENG
JPN
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Lesson
1 year ago
ENG
JPN
Sketch and loft between two sketch profiles to create a sheet metal part. Understand the requirements for the sketch profiles and the loft feature. Sketch the profiles for a lofted sheet metal part. Understand the requirements for a lofted sheet metal part. Set the thickness and bend line options.
Lesson
2 years ago
ENG
JPN
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Lesson
2 years ago
ENG
JPN
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
2 years ago
ENG
JPN
Update the parameters that control the overall shape and size of the part for the Certified SOLIDWORKS Professional sample exam. Manual edit individual dimensions and globally change the values of variables. Rebuild the model to ensure that all features update correctly.
Lesson
2 years ago
ENG
When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Lesson
2 years ago
ENG
JPN
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
2 years ago
ENG
JPN
When edges of a part are too close to allow for fillets to be created properly, often making use of separate solid bodies can help. Separate features into separate solid bodies. Apply fillets to the individual bodies. Use the Combine command to add the bodies back together. Apply an additional fillet to the part to complete the model.
Lesson
2 years ago
ENG
JPN
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
2 years ago
ENG
JPN