An introduction to the many types view manipulation for parts, assemblies, and drawings. Explore the different types of views. Understand how to manipulate views using menus, the keyboard, mouse, and reference triad.
Lesson
2 months ago
ENG
FRA
DEU
JPN
CHS
Use design tables to quickly create many configurations that change the suppression states of components, mates, and assembly features. Also, you can use design tables to configure the dimensions of mates and assembly features. Understand the options when creating a design table. Use data validation to restrict values entered in the design table. Set configuration properties to control new mates and components. Change the configuration of components in the assembly design table.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Add materials to parts for calculations of mass properties, for use with SOLIDWORKS Simulation, and to modify the appearance of the part. Define the material for a part. Add a custom material to a part. Use configurations to assign different materials to a part.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Use standard mates to constrain the degrees of freedom of components relative to other components or reference geometry such as planes or axes. Learn about standard mate types such as coincident, concentric, and more. Understand how selected entities such as faces, edges, vertices, planes, or axes determines the available mate types.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Use sketch relations and dimensions to fully define a sketch. Understand the status of a sketch, either under defined, fully defined, or over defined. Evaluate a sketch to determine why it is under defined.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Create ellipses and slots as entities in a sketch. Learn about the variety of tools you can use to create ellipses and slots. Understand when you might choose the different ellipse and slot tools based on points in the center or along the perimeter of the ellipse or slot.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Create circles and arcs as entities in a sketch. Learn about the variety of tools you can use to create circles and arc. Understand when you might choose the different circle and arc tools based on points in the center or along the perimeter of the circle or arc.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Create rectangles as entities in a sketch. Learn about the variety of tools you can use to create rectangles. Understand when you might choose the different rectangle tools based on the center and corners of the rectangle.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Create lines and centerlines as entities in a sketch. Understand the options for creating lines in a sketch. Draw lines that are vertical, horizontal, or at a specified angle. Use centerlines for relations and dimensions to facilitate the creation of model geometry.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Understand the importance of picking the correct sketch plane for starting a part. Choose the starting feature and starting sketch plane for a part. Understand how the choice of a starting sketch plane can affect the drawing.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Use the Physical Dynamics options when moving components to allow realistic interaction between assembly components. Physical dynamics identifies collisions between faces and allows components to push one another when they come into contact. Understand options within the Move Component command. Use the Physical Dynamics option to simulate interaction between components being moved. Understand the limitations of using Physical Dynamics versus a Motion Study. Learn how to troubleshoot issues when using the physical dynamics option.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Exploded views can be created in assemblies to assist in detailing and visualizing components. Learn how to create an exploded view in an assembly. Use the options within the Exploded View command to explode single and multiple components. Understand the options for exploding sub-assemblies. Automate spacing for multiple components in a chain explode step. Learn how to animate explode steps.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
The SOLIDWORKS user interface (UI) can be modified to suit your needs by displaying the tools you use most. You can rearrange the display of toolbars and the CommandManager and add your own keyboard shortcuts and mouse gestures. Turn tabs on and off in the CommandManager. Learn how to dock and undock toolbars and panes. Add commands to toolbars. Add keyboard shortcuts. Customize mouse gestures.
Lesson
3 months ago
ENG
FRA
DEU
JPN
CHS
Understand the difference between starting a sketch on a plane or planar face. Create the first 2D sketch profile on a reference plane. Create additional 2D sketch profiles on planar model faces of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Evaluate the size, weight, and more of a model using the measure and mass properties tools. Understand how the material and coordinate system of a part affect its mass properties. Measure between points and circles to determine the size of a part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use automatic sketch relations to capture design intent as you sketch a profile. Identify the icons that appear on the cursor to signify automatic sketch relations. Create a sketch profile and add automatic sketch relations as you sketch.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use sketch relations to fully define a sketch and capture design intent. Learn about automatic sketch relations and sketch relations that you add manually. Add relations between two lines to understand common sketch relations. Add relations between circles and arcs to observe additional sketch relations.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create rounded or beveled edges using fillets or chamfers, respectively. Understand general filleting rules to facilitate better modeling practices. Create and understand some of the options for constant radius fillets. Create and understand some of the options for chamfer features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Move a sketch profile along a path to create a swept feature. Use sketch relations to create a sketch path relative to other sketches in the part. Understand some of the basic options for swept features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Revolve sketch profiles about an axis to add or remove material. Create sketches, with the proper entities, relations, and dimensions that facilitate revolved features. Understand some of the options for revolved features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Extend sketch profiles to create extruded bosses to add material and extruded cuts to remove material. Use sketch relations and dimensions to define sketch profiles. Understand some of the options for extruded features. Add material with an extruded boss and remove material with an extruded cut.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create assemblies by adding and orienting existing parts in an assembly. Add mates to connect the components. Create a new assembly from a part. Introduce the assembly FeatureManager design tree. Insert components into the assembly. Move and rotate components. Add mates between components.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the Interference Detection tool to identify any overlap between parts in an assembly. Clearance between parts can also be detected using the Clearance Verification tool. Use the Interference Detection tool to identify interferences between assembly components. Explore the options available within the Interference Detection tool. Use the Clearance Verification tool to identify clearances between assembly components. Explore the options available with the Clearance Verification tool.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS