Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
설계에서 모델의 내부 컷 피처가 가장 중요한 경우, 한 가지 방법은 파트의 네거티브 스페이스를 나타내는 솔리드 피처를 작성하는 것입니다. 네거티브 스페이스가 완료되면 결합 명령을 사용하여 다른 솔리드 바디에서 이 볼륨을 제거합니다. 파트의 네거티브 스페이스를 작성할 때 매니폴드의 내부 공간을 나타내는 솔리드 지오메트리를 사용합니다. 매니폴드의 본체로서 지오메트리 주위에 별도의 솔리드 바디를 작성합니다. 제거 작업을 통해 파트의 솔리드 바디를 결합합니다.
