Animations provide an extra visual representation of how an assembly can be put together, taken apart, and shows the order in which parts are added. Animations compliment exploded views incredibly well and help manufacturers and assemblers understand exactly how the components come together. Animations also serve as a great marketing tool, as they can show off the complexities of the design as well as how refined the final product is. In this lesson, an Animation will be created in SOLIDWORKS Composer by exploding additional components in this assembly.
Lesson
3 years ago
ENG
FRA
DEU
JPN
ESP
ITA
CHS
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
3 years ago
ENG
JPN
Learn how to optimize designs to reduce model weight by varying model dimensions. Apply parameters and constraints to optimize your design to meet goals. Learn how design studies are used with Simulation.
Lesson
3 years ago
ENG
Exploded views can be created in SOLIDWORKS Composer and are incredibly helpful when trying to show all the components used in an assembly, or for showing how to assemble, disassemble, or repair the assembly. Exploded views can also be used for other purposes such as showing off a design by a marketing team. In this lesson, an exploded view and detailing the individual components will be shown by adding labels to each part in the assembly.
Lesson
3 years ago
ENG
FRA
DEU
JPN
ESP
ITA
CHS
Observe stress analysis of a part using SimulationXpress to determine the deformation of the part under the influence of a load (force or pressure). Understand the assumptions and limitations of SimulationXpress. Observe stress analysis being performed on a part.
Lesson
3 years ago
ENG
JPN
Discover the SOLIDWORKS Simulation product suite by exploring all of the modules. Analyze heat transfer and fluid flow using SOLIDWORKS Flow. Use Sustainability to reduce the environmental impact of your designs. Explore stress-strain analysis using SOLIDWORKS Simulation. Analyze rigid body dynamics using SOLIDWORKS Motion. View the fill patterns of plastic injected parts using SOLIDWORKS Plastics.
Lesson
2 years ago
ENG
Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Lesson
2 years ago
ENG
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Lesson
2 years ago
ENG
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Lesson
2 years ago
ENG
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Lesson
2 years ago
ENG
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Lesson
2 years ago
ENG
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
Lesson
2 years ago
ENG
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Lesson
2 years ago
ENG
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
Lesson
2 years ago
ENG
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
Lesson
2 years ago
ENG
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
Lesson
2 years ago
ENG
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
Lesson
2 years ago
ENG
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
2 years ago
ENG
JPN
When edges of a part are too close to allow for fillets to be created properly, often making use of separate solid bodies can help. Separate features into separate solid bodies. Apply fillets to the individual bodies. Use the Combine command to add the bodies back together. Apply an additional fillet to the part to complete the model.
Lesson
2 years ago
ENG
JPN
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
2 years ago
ENG
JPN
When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Lesson
2 years ago
ENG
JPN
Use the Move Face and Delete Face tools to modify non-parametric, imported geometry. Increase the size of a model by moving faces of the body. Remove and patch filleted faces of a model by deleting the faces. Increase the diameter of a cylindrical boss by offsetting the cylindrical face.
Lesson
2 years ago
ENG
JPN
Move the components within a sub-assembly using flexible sub-assemblies. Modify the component properties of a sub-assembly to change it from rigid to flexible. Drag components of a flexible sub-assembly in the main assembly to observe their motion. Learn about the impact that flexible sub-assemblies have on overall assembly performance.
Lesson
2 years ago
ENG
Use both bottom-up and top-down assembly modeling design techniques to insert and modify components in an assembly. Insert components into an assembly using a bottom-up approach. Modify a component using a top-down approach. Create a new component using a top-down approach.
Lesson
2 years ago
ENG