使用 SimulationXpress 觀察零件的應力分析，判斷零件在負載 (力或壓力) 影響下的變形。 瞭解 SimulationXpress 的假設和限制。 觀察零件上正在執行的應力分析。
Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
若零件邊線太接近，以致無法正確產生圓角時，利用個別實體本體通常有助於改善問題。 將特徵切割為個別的實體本體。 套用圓角至個別本體。 使用「結合」指令，重新將本體加在一起。 套用其他圓角至零件，以完成模型。
當模型的內部除料特徵是設計中最重要的一環時，方法之一是產生實體特徵來代表零件的負空間。 完成負空間後，便可使用「結合」指令，從另一個實體主體減去體積。 使用實體幾何代表多樣性的內部空間，來產生零件的負空間。 在幾何周圍產生個別的實體本體，作為多樣性的主要本體。 使用減除操作來結合零件中的實體本體。
瞭解 Certified SOLIDWORKS Professional 測驗。 發現取得認證的優點。 瞭解為取得認證而需具備的一些 SOLIDWORKS 技能。
