When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Use both bottom-up and top-down assembly modeling design techniques to insert and modify components in an assembly. Insert components into an assembly using a bottom-up approach. Modify a component using a top-down approach. Create a new component using a top-down approach.
Create several types of derived drawing views and understand the unique characteristics of each view type. A derived drawing view is created by referencing an existing drawing view. Create a projected view by folding off an existing drawing view. Project a view normal to a selected edge to create an auxiliary view. Show a portion of a view at an enlarged scale using detail views. Create a drawing view relative to planes or planar faces in the model. Focus on a portion of a drawing view by cropping and hiding the unwanted entities. Shorten an existing drawing view using broken views.
Insert annotations into existing drawing views, including custom notes, geometric tolerances, and blocks. Create annotations and symbols. Create blocks from geometry and notes. Save a block to a file. Insert a block into a drawing.
Learn how shells are used to model thin structures. Create shells on thin structures using the shell manager. Apply symmetry fixtures to reduce computational efforts.
Create a weldment frame from a series of layout sketches. The weldment environment uses standard weldment profiles to define the type of structural members in the weldment. Members of the same type and size are created in one feature. Create a weldment frame. Insert structural members. Relocate the profile sketch. Change corner treatments.
Model parts in the context of an assembly, using references to other components to complete the design. The design intent for new parts (sizes of features, placement of components in the assembly, etc.) comes from other components in the assembly. Build a virtual part in the context of an assembly by employing Top-Down assembly modeling techniques. Create features in the assembly context by referencing geometry in mating parts. Understand InPlace mates and external references. Identify external references in the FeatureManager design tree.
Install and use the testing software that you use to take any of the SOLIDWORKS certification exams. Download the Tester Pro Client software. Explore the user interface and critical aspects of the test taking experience.
A structural member profile is a cross-section of a beam, tube, channel, or other structural member type. Sweeping this profile along segments of a layout sketch creates the structural member\'s geometry. There are full collections of profiles and sizes available for download, and it is also possible to create customized profiles. Learn how to access the additional content for standard structural member profile sizes. Create a custom weldment profile by saving a sketch as a Library Feature Part. Use the Structural Member command to create a structural member from a structural member profile. Use the Locate Profile option to choose a sketch point for aligning a structural member.
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
Create a pattern of one or more features or bodies in one or two linear directions. Unwanted instances can be left out of the pattern, and spacing and other dimensions may be varied. Create bi-directional linear patterns of existing features. Skip instances in a pattern. Vary parameters of pattern instances.
Create a pattern of one or more features or bodies in one or two circular directions. The circular direction is based on a cylindrical or conical face, a circular or linear edge, centerline or axis. Spacing of instances can be controlled in different ways. Create circular patterns of existing features. Vary spacing and range.
Copy instances of one or more features or bodies by mirroring them across a reference plane or planar face. The resultant copy is reversed, as if seen in a mirror, maintaining symmetry. Create mirror patterns of features and bodies. Control results with geometry pattern option.
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What\'s Wrong dialog. Edit the plane used by a sketch.
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Review the various end condition options for extruded features. Examine the end conditions defined by distance from the sketch: Blind, Through All, and Midplane. Examine the end conditions defined by existing 3D geometry: Up to Next, Up to Vertex, Up to Surface, Offset from Surface, and Up to Body. Identify geometry differences based on the selected end condition.
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Mirror existing sketch entities with the Mirror Entities tool or by adding symmetric relations. Or, dynamically mirror sketch entities as you create them. Mirror sketch entities that you previously created. Dynamically mirror sketch entities as you create them. Add symmetric relations to sketch entities to mirror the entities.
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
