Use several direct editing techniques for working with imported geometry using surfacing tools. Explore the Delete Face tool, the Delete Hole command, and the Untrim Surface tool. Use the Delete Face tool to remove an unwanted imported geometry feature. Use Delete Hole and Untrim Surface to remove an unwanted imported geometry feature. Convert a surface body into a solid body using the Thicken command.
Lesson
1 year ago
ENG
JPN
Use extruded, revolved, and swept surfaces to create geometry. Trim, extend, knit, and thicken the surfaces to finish the thin-walled model. Extrude a sketch to create a surface. Revolve a sketch about an axis to create a surface. Trim a surface using a sketch or another surface as the trim tool. Sweep an open profile along a path to create a surface. Combine multiple surfaces into a single body using knit surfaces. Thicken a surface body to create a solid body.
Lesson
1 year ago
ENG
JPN
Sketch and loft between two sketch profiles to create a sheet metal part. Understand the requirements for the sketch profiles and the loft feature. Sketch the profiles for a lofted sheet metal part. Understand the requirements for a lofted sheet metal part. Set the thickness and bend line options.
Lesson
2 years ago
ENG
JPN
Locate and diagnose problems in geometry imported from other CAD software. Then, use surface tools to repair the damaged geometry. Diagnose problems in a model with verification on rebuild, import diagnostics, and check entity. Heal faulty faces using the import diagnostics tool. Delete faulty faces and use various surface tools to re-create the geometry. Display curvature and check the minimum radius of curvature. Delete and replace fillets to create smoother blends. Extend, trim, and knit surfaces.
Lesson
2 years ago
ENG
JPN
Use surface tools to create complex blends at the intersections of surfaces. The tools used in this module include trim surfaces, lofted surfaces, and fill surfaces. Trim surfaces using a sketch as the trim entity. Create a blend between surfaces using a lofted surface. Fill an area that is completely bounded by surfaces using the fill surface tool.
Lesson
2 years ago
ENG
JPN
When the internal cut features of a model are of most importance in a design, one approach is to create solid features that represent the negative space of a part. Once the negative space is complete, the Combine command can be used to subtract the volume from another solid body. Use solid geometry representing the interior space of a manifold to create the negative space of the part. Create a separate solid body surrounding the geometry as the main body of the manifold. Combine the solid bodies in the part using a subtract operation.
Lesson
2 years ago
ENG
JPN
Create exploded views in multibody parts using some of the same tools that you use to create an exploded view in an assembly. Toggle between exploded and collapsed states. Edit the explode steps. Create more than one exploded view per configuration.
Lesson
2 years ago
ENG
JPN
When edges of a part are too close to allow for fillets to be created properly, often making use of separate solid bodies can help. Separate features into separate solid bodies. Apply fillets to the individual bodies. Use the Combine command to add the bodies back together. Apply an additional fillet to the part to complete the model.
Lesson
2 years ago
ENG
JPN
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
2 years ago
ENG
JPN