了解如何使用子建模来分析大型装配体的一部分以节省时间并获得更准确的结果。 从父算例创建子模型算例。 了解载荷如何自动转移到子模型算例中。 节省时间和计算资源的同时保持准确的结果。 使用 eDrawings 来保存结果。
Lesson
3 月 前
ENG
了解如何在考虑辐射、传导和对流的同时进行热分析。 通过考虑传导、对流和辐射的影响来获得准确的热结果。 测量温度和热通量。
Lesson
3 月 前
ENG
本系列介绍接触层次结构、引脚连接器和弹簧连接器。 将材料应用到引脚连接器以分析强度。 使用预载创建弹簧以考虑弹簧张力。 使用接触层次结构来控制接触。
Lesson
3 月 前
ENG
本模块通过观察元素大小如何影响应力、应变和位移介绍网格收敛的概念。 了解更改全局元素大小将如何影响结果。 了解如何在指定位置应用网格控制。 观察锐圆角如何产生应力集中。
Lesson
3 月 前
ENG
了解如何使用疲劳模块在反复的载荷条件下分析结构。 将 S-N 曲线应用到材料以进行反复的载荷分析。 应用修正因子以获得更切合实际的结果。 查看损坏图解以分析材料寿命。
Lesson
3 月 前
ENG
本系列介绍接触、螺栓和远程载荷的概念。 分析装配体内的接触。 通过排除可以使用连接器和远程载荷表示的零件来简化模型。
Lesson
3 月 前
ENG
本模块介绍 Simulation 用户界面并指导您完成简单零件的设置流程。然后,将运行模拟并分析结果。 了解 Simulation 用户界面。 应用夹具、材料和载荷。 运行模拟并分析模型的应力和位移。
Lesson
3 月 前
ENG
了解在分析装配体结构的固有振动时如何使用接触。 分析装配体结构的固有频率形状和模式。 测试各种接触条件以分析结构刚度。
Lesson
1 年 前
ENG
了解如何使用壳体来对薄壁结构建模。 使用壳体管理器在薄壁结构上创建壳体。 应用对称夹具以减少计算工作量。
Lesson
1 年 前
ENG
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
Lesson
2 年 前
ENG
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
Lesson
2 年 前
ENG
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
Lesson
2 年 前
ENG
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
Lesson
2 年 前
ENG
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Lesson
2 年 前
ENG
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
Lesson
2 年 前
ENG
通过浏览所有模块了解 SOLIDWORKS Simulation 产品套件。 使用 SOLIDWORKS Flow 分析热传递和流体流动。 使用 Sustainability 减小设计的环境影响。 使用 SOLIDWORKS Simulation 了解应力-应变分析。 使用 SOLIDWORKS Motion 分析刚性几何体动力学。 使用 SOLIDWORKS Plastics 查看注塑零件的填充阵列。
Lesson
2 年 前
ENG
了解如何通过改变模型尺寸来优化设计以减轻模型重量。 应用参数和约束以优化设计使其满足您的目标。 了解如何在 Simulation 中使用设计算例。
Lesson
3 年 前
ENG