Learn the basics of SOLIDWORKS design, and build a SOLIDWORKS feature-based, parametric, solid model using sketches and features. Create a new sketch. Sketch geometry like lines and circles. Add relations and dimensions. Revolve and extrude sketches to create features. Shell to create a thin walled model. Test the design with dimensional changes.
Lesson
8 months ago
ENG
FRA
DEU
JPN
KOR
CHS
Use design tables to quickly create many configurations that change the values of dimensions and the suppression states of features. Set up a model to effectively use design tables. Understand the options when creating a design table. Add columns to a design table for additional dimensions and features to control. Add rows to a design table for additional configurations to create.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create fillets and chamfers to modify geometry in a sketch. Set the size and options for the sketch fillets and sketch chamfers. Create fillets and chamfers in a sketch. Understand the options for creating sketch fillets and sketch chamfers.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Interrogate a part using rollback to understand how it was created. Change the sequence of features and edit features, sketches, and sketch planes. Roll forward through an existing part. Reorder a feature in the FeatureManager design tree. Understand parent/child relationships. Edit sketches and features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Diagnose and repair issues with sketches including extraneous geometry, dangling dimensions, and dangling relations. Diagnose problems in a part. Repair sketch geometry problems. Repair dangling relations and dimensions. Use the What\'s Wrong dialog. Edit the plane used by a sketch.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create a sketch driven pattern, table driven pattern, curve driven pattern, and a fill pattern. These patterns allow you to pattern features in non-linear or non-circular directions. Use sketch points to define a sketch driven pattern. Specify coordinates for a table driven pattern. Convert entities to create a sketch for a curve driven pattern. Distribute features within a boundary using a fill pattern.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Contour selection options allow individual contours to be selected within a sketch. By making use of contour selection techniques, a single sketch can be used to produce multiple features. Use the Contour Select Tool to pre-select contours for a feature. Use the Selected Contours options for a feature to define areas of a sketch to use. Use a single sketch to generate multiple features. Understand the icons displayed when using selected contours and sharing sketches.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Extend sketch profiles to create extruded bosses to add material and extruded cuts to remove material. Use sketch relations and dimensions to define sketch profiles. Understand some of the options for extruded features. Add material with an extruded boss and remove material with an extruded cut.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Revolve sketch profiles about an axis to add or remove material. Create sketches, with the proper entities, relations, and dimensions that facilitate revolved features. Understand some of the options for revolved features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Move a sketch profile along a path to create a swept feature. Use sketch relations to create a sketch path relative to other sketches in the part. Understand some of the basic options for swept features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS
Create rounded or beveled edges using fillets or chamfers, respectively. Understand general filleting rules to facilitate better modeling practices. Create and understand some of the options for constant radius fillets. Create and understand some of the options for chamfer features.
Lesson
5 months ago
ENG
FRA
DEU
JPN
CHS