SustainabilityXpress 可預估模型碳足跡、其生命週期中的能源消耗、空氣酸化及水優養化。 隨即會分析資訊,例如使用的材質、製造過程、製作區域、使用區域和壽命終結。 探索不同的材質和製造過程如何影響設計的環境影響力 指定產品使用資訊,以決定運輸和壽命終結的值。 瞭解「環境影響」圖表中顯示的資訊。 瞭解如何設定環境影響基準線來比較變更。 產生 Sustainability 輸出的報告。
Lesson
3 年 前
ENG
JPN
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the first of two lessons containing these exercises.
Lesson
2 年 前
ENG
This lesson contains exercises so you can improve your proficiency with Features and Parts before taking the Certified SOLIDWORKS Associate (CSWA) exam. There are 12 practice exercises for Features and Parts so this is the second of two lessons containing these exercises.
Lesson
2 年 前
ENG
Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Lesson
2 年 前
ENG
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Lesson
2 年 前
ENG
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Lesson
2 年 前
ENG
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Lesson
2 年 前
ENG
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
Lesson
2 年 前
ENG
產生動畫,以模擬纜線從一個捲軸上捲開後再纏繞上另一個捲軸。使用螺旋曲線、參考平面及掃出以模型化纜線。 定義數學關係式,以修改幾何並模擬纏繞的纜線。 產生動畫。 使用螺旋曲線、參考平面及掃出特徵以模型化纜線。 定義數學關係式以修改幾何。 使用 MotionManager 隨時間變更結合值。
Lesson
2 年 前
ENG
JPN
產生作為掃出特徵路徑的變化螺距螺旋曲線。 瞭解可定義變化螺距螺旋曲線形狀的選項。 產生變化螺距螺旋曲線。 針對掃出特徵適當地放置輪廓及路徑草圖。 產生於某一點垂直於曲線的基準面。
Lesson
2 年 前
ENG
JPN
將偏移圓角套用至三條或更多條邊線交會的頂點。 偏移圓角可在頂點模型化外觀更簡潔的混合。 將偏移值套用至三條或更多條邊線交會的頂點。
Lesson
2 年 前
ENG
JPN
使用模型的預設座標系統來產生 3D 草圖,以決定草圖圖元的方位。 加入限制條件和尺寸來限制草圖圖元的大小。 繪製草圖時使用螢幕上的回饋。 使用基準面來決定 3D 草圖圖元的方位。 按下 Tab 鍵或使用基準面或平坦面,來變更草圖基準面。 顯示多個視埠以修改 3D 草圖圖元。
Lesson
2 年 前
ENG
JPN
在選定的頂點與控制點設定半徑值,以於該處產生變化半徑圓角。 此外,您可以將半徑設定為零,以強制圓角聚集成一個點。 沿著選定邊線於半徑變化之處產生圓角。 修改頂點或控制點的半徑值。 在圓角必須聚集成一個點之處,產生零半徑圓角。
Lesson
2 年 前
ENG
JPN
使用疊層拉伸特徵或邊界特徵,來產生與周圍幾何充分混合的轉換。 設定邊界特徵的相切選項,以配合相鄰面的曲率。 合併模型中具備不同輪廓的兩個部分。 檢查建立邊界特徵的選項。
Lesson
2 年 前
ENG
JPN
將草圖投射至另一個草圖,以產生代表水瓶護箍的曲線。 產生代表水平整體形狀的草圖。 將一個草圖投射在另一個草圖上,以產生 3D 曲線。 使用 3D 曲線作為路徑來產生掃出特徵。
Lesson
2 年 前
ENG
JPN
在模型與草圖基準面相交處,或是模型面互相相交處,產生 2D 或 3D 草圖。 您可以使用草圖來判斷拔模角度、評估曲率,作為掃出路徑,以及用於其他功能。 在選定面與草圖基準面相交處產生 2D 草圖圖元。 在選定面互相相交處產生 3D 草圖圖元。
Lesson
2 年 前
ENG
JPN
複製及導出草圖,以便多次使用原始草圖。 複製的草圖並未與原始草圖相關聯,但原始草圖每次變更時,導出的草圖便會隨之變更。 產生與原始草圖保持相同形狀的導出草圖。 複製草圖。 修改草圖的位置及尺寸。 產生貫穿三個輪廓草圖的疊層拉伸。
Lesson
2 年 前
ENG
JPN
疊層拉伸在輪廓之間作疊層轉移來產生特徵。疊層拉伸可以是基材、填料、除料或表面。 指定限制及連接參數,以獲得想要的結果。 在兩個輪廓之間產生基本的疊層拉伸特徵。 使用中心線曲線、終止限制及連接點來精細化形狀。 正確地選擇疊層拉伸輪廓及連接點。
Lesson
2 年 前
ENG
JPN
瞭解產生掃出輪廓草圖的最佳操作方式。在輪廓草圖圖元及導引曲線之間加入關係。 產生草圖限制條件,以確保沿著完整路徑的輪廓形狀正確。 設定路徑及導引曲線,然後再產生輪廓草圖。 在導引曲線及輪廓草圖間加入貫穿限制條件。 使用導引曲線產生掃出特徵。 使用垂直及平行限制條件定義掃出輪廓。
Lesson
2 年 前
ENG
JPN
瞭解可控制掃出路徑上各處之掃出輪廓方位及扭轉的掃出選項。 設定方位/扭轉選項以控制掃出輪廓。 瞭解「依循路徑」和「固定剖面法向量」之間的差異。 使用曲率梳形來觀察掃出輪廓中的扭轉。
Lesson
2 年 前
ENG
JPN
設定掃出特徵的選項,以控制路徑上各處的輪廓方向及扭轉。 使用曲率梳形來評估路徑及導引曲線的曲率。 控制掃出路徑各處的輪廓扭轉。
Lesson
2 年 前
ENG
JPN
產生曲線,並使其穿透您輸入對話方塊或從 ASCII 文字檔案輸入的一連串 X、Y 和 Z 點。 輸入曲線貫穿點的 X、Y 及 Z 座標,以產生曲線。 輸入曲線貫穿點的一組 X、Y 及 Z 點。 將曲線轉換成草圖圖元。
Lesson
2 年 前
ENG
JPN
產生以數學關係式定義的 2D 或 3D 曲線。 曲線可以是顯性 (其中 y 是x 的函數),也可以是參數式 (其中 x、y、及 z 是 t 的函數)。 使用參數式數學關係式產生 3D 不規則曲線。 使用一條 3D 不規則曲線作為路徑,而另一條作為導引曲線,以產生掃出特徵。
Lesson
2 年 前
ENG
JPN
在圓柱或圓錐形表面周圍包覆平面草圖。 包覆特徵可以是加入材質的浮凸類型、移除材質的凹陷類型,以及分割面的刻畫類型。 找到包覆特徵的草圖基準面。 使用數學關係式定義草圖長度。 使用包覆特徵的凹陷選項移除材質。
Lesson
2 年 前
ENG
JPN