Tooling split error Tags:none(add)solidworks mold making
SOLIDWORKS Forums
6 days ago
draft analysis issue I have an issue with draft analysis feature. When I want to start analysis and hit the "draft analysis" button - nothing happened.
SOLIDWORKS Forums
11 days ago
I am trying to make a mold for an aluminum propeller hub. I watched a Javelin video as a guideComplex Mold Split Using SolidWorks - YouTube. When i tried to split the solid parts I keep getting message that my surface doesn't split the solid. Have tried to knit and extend surfaces. a fairly complex part (at least for me). will try to attach my file.
SOLIDWORKS Forums
11 days ago
I need to figure out how to create liquid parts to be added to an assembly, but I have some hurdles – namely the need to have one configuration for that liquid part, and remain linked to the assembly. I'm not sure if this is possible, but if anyone has a way, it would be a big help. The main constraint is that I'm in a documentation system that uses EPDM, where files and revisions are strictly controlled.
SOLIDWORKS Forums
27 days ago
I understand that the part needs to be drafted to more easily pop out of the mold. I found this explanation from Solidworks: From this site, I understand that defining a part's face as having a positive or negative draft is based upon the reference angle, but I really don't understand what this reference angle is in "reference" to.
SOLIDWORKS Forums
1 month ago
cavity feature from mold Please it is possible to have a pdf, ppt or video about how to use the cut application from
SOLIDWORKS Forums
1 month ago
Undercut Analysis What is relationship between the Occluded Undercut numbers (43) in the PM and numbers in the part? Because both do not match.
SOLIDWORKS Forums
1 month ago
I have a part I'm trying to design for a personal project. This was my first attempt at using surfaces and thicken to create a complex, thin part. I've tried following tutorials for two part mold design but I've had no luck implementing the techniques on my part. I'm starting to think that the geometry resulting from the surfaces/thicken may be the issue.
SOLIDWORKS Forums
1 month ago
In molding when separating the core and cavity either Exploded View command or Move/Copy Bodies command is used. In my view Move/Copy Bodies command is more versatile than Exploded View command. Is there any other advantages?
SOLIDWORKS Forums
1 month ago
Draft Analysis And you do not have "Gradual transition" checked under the Color Settings for the draft analysis?
SOLIDWORKS Forums
2 months ago
In YouTube videos Parting Surface is created larger than the mold body. But in a MySolidWork tutorial Parting Surface comes inside the mold body. Does size of the Parting Surface matter?
SOLIDWORKS Forums
2 months ago
I've recently been cast into the world of injection molding and wondered if anyone could offer some insight into one of the challenges we've encountered. This is probably going to be a stupid question, but here goes: One of our products is a carbonation vessel with a threaded cap, injection molded using a thermoplastic elastomer (NEWMAT "Easiprene" SBS/SEBS).
SOLIDWORKS Forums
2 months ago
Tooling Split This is a MySolidWork tutorial. How to use Tooling Split for this part?
SOLIDWORKS Forums
2 months ago
Sorry but yes, it's plain as day. The single color makes it almost invisible. Try to pick that area see what it does.
SOLIDWORKS Forums
2 months ago
Rubén Rodolfo BalderramaSep 10, 2018 7:47 AM(in response to Maha Nadarasa) Maha NadarasaSep 10, 2018 6:04 AM(in response to Rubén Rodolfo Balderrama) Alex BurnettSep 11, 2018 8:45 AM(in response to Rubén Rodolfo Balderrama) To elaborate on what Ruben said. If you want to draft the cylinder, remove the radii where the fins meet the center cylinder with something likeDelete Face (Delete & Patch). Then try again to draft the cylinder. I don't know that you need a step draft for this.
SOLIDWORKS Forums
2 months ago
injection point size Seven year user of Solidworks, but just started using plastic. Have used Autocad Moldflow over the years, so I do have some experience.
SOLIDWORKS Forums
2 months ago
There are two different type of videos I have seen. 1) In some videos part is modeled in the part file and placed in the assembly file and Core and Cavity is created.
SOLIDWORKS Forums
3 months ago
I have two questions. When trying to draft (+Draft1 in the FMDT) this surface gives error message. But it works when having separate drafting feature +Draft2 in the FMDT (Feature manager design tree).
SOLIDWORKS Forums
3 months ago
Draft Analysis How to get rid of this yellow lines?
SOLIDWORKS Forums
3 months ago
Heal Edges In this video Heal Edges is used. What is the purpose of using it?
SOLIDWORKS Forums
3 months ago
Overlapping Parting Surfaces In the video Parting Surfaces are not overlapping. In my file it overlaps.
SOLIDWORKS Forums
3 months ago
This is a video. In this case Boundary of the Sketch (sketch13) is smaller than the Parting Surface but I got an error message. What is the reason?
SOLIDWORKS Forums
3 months ago
This video shows drafting an imported part. I am unable to getdraft instead I getdraft. How to fix it?
SOLIDWORKS Forums
3 months ago
This is a continuation from following post. I want to prepare this model for Draft so that I want to get rid of this yellow color surface. How to do it?
SOLIDWORKS Forums
3 months ago