I am using Solidworks 2018 with EPDM. When I file save as in an assembly, it then proceeds to give me a save as dialog prompt to save all the parts and assemblies in my original assembly one by one. I had this problem in 2015 and solved it by checking the box "Don't prompt to save read-only referenced documents (discard changes)" This check box is still checked. I also tried to change my registry to put a "1" in the "Abort read-only Top Docks" value.
SOLIDWORKS Forums
49 minutes ago
Real View Graphics My GC supportsRealView Graphics.It was active with SWX 2018 but with SWX 2019 it is inactive though I installed driver for SWX 2019.
SOLIDWORKS Forums
3 hours ago
It looks like you have something trying to drive the value ofMinor_dia@BodySketo 0.000mm. As you can see in the images below, the value is shown as 6.6190mm in the graphics area but when you double-click the dimension to edit it, the value shown is actually 0.0000mm. A line can't have zero length so the system is throwing an error. In the third image below, I've added a new dimension controlling the line length defined byMinor_dia@BodySkedimension and then deleted theMinor_dia@BodySkedimension
SOLIDWORKS Forums
4 hours ago
So I'm Trying to design an air inlet. I created tapered extrusions to link the inner surface (a revolution) and the outer surface (a loft). What I'm trying to do it do a cut loft that will remove the excess material from the outer part of my piece. I'm trying to remove the triangles outside of the outer piece.
SOLIDWORKS Forums
6 hours ago
need help whit shell Re: need help whit shell
SOLIDWORKS Forums
6 hours ago
Hi, I am new to SolidWorks. Using the Curve XYZ method, I was able to create a specific airfoil.
SOLIDWORKS Forums
8 hours ago
I have two parts that have the same distance between their cylindrical faces which are perfectly parallel however for some reason Solidworks won't let me mate them. I can't seem to work out what is going on. Would someone mind having a look at my assembly and let me know what I am doing wrong?
SOLIDWORKS Forums
8 hours ago
I’m really struggling with a lofted part I am designing and am hoping someone can help ..the method I have used to build it thus far is rather messy owing to endless fiddling to get things to work – see attached - I'm learning.
SOLIDWORKS Forums
8 hours ago
SWIFT = SolidWorks International Forum Team How many times do you see a great thread get trashed or hijacked for various reasons and I'll take the "Stand" and say I'm the worst for doing that.. So when I'm acting stupid tell me to trash it here, get it?
SOLIDWORKS Forums
10 hours ago
Material Issue Is this in a BOM? The way I've done something like this in the past is to add a Custom Property to my parts called BOM Material.
SOLIDWORKS Forums
10 hours ago
Imported assembly gets "graduation hat" icon I have an education version of Solidworks 2018. I am trying to import an assembly from Inventor I got from another school and the assembly and all the parts have a graduation hat icon next to them in the feature manager.
SOLIDWORKS Forums
10 hours ago
So i want to make a macro that will load the styles i have already made for dimensions. i know its just a couple clicks to imput them into a new drawing, but i would like to have it load them in with a shortcut just so i don't have to do the same thing all the time when opening old documents that i need to load them into. Re: Macro to Load Dimension Styles
SOLIDWORKS Forums
10 hours ago
Jive Software Version: 2018.7.0.1_jx, revision: 20180814200645.7fbf90c.release_18.7.0-jx
SOLIDWORKS Forums
11 hours ago
This challenge could possibly be the simplest ever, since this topic has been debated before on this forum, so a solution might already be available. A video describing this challenge has been attached to this post and can also be found here:SWPUC 21 Challenge: How to Model the Most Accurate Barrel Cam - YouTube
SOLIDWORKS Forums
11 hours ago
Correct. I want servo motors to fit inside the cone and make a cover for this part so that I can later access these motors. Hello Noah,.. import, center, copy the edges or estimate the profile,.. rotate and cut.. (image attached)
SOLIDWORKS Forums
11 hours ago
I noticed that my colleagues who work with composer are inserting composer pictures (.png) into word when creating instructions. Is it possible to insert composer file directly (similarly as autocad drawing) and to be able to open it in composer when double clicking on it? Alessandro TORNINCASAEmployeeOct 12, 2018 1:22 PM(in response to Damir Galic) Richard Earleywrote a blog post about this:
SOLIDWORKS Forums
12 hours ago
Greetings all Can someone please tell me what "H" in ISO 2768-mH means? Right now I am assuming the "m" stands for medium, and what is -1 and -2. Should i take -1 or -2 Thanks in advance
SOLIDWORKS Forums
13 hours ago
We don't have full versions of SolidWorks here so I have no idea if this is possible. I actually use Siemens NX to do all of my modelling and while it is quite powerful - it's more for modifying models than for creating ones from scratch. Creating webbing manually by hand is very tedious and time consuming, lots of trial & error as well, and am thinking it's time for a more dedicated piece of software; however, if it can't satisfy my needs - I can't see the point.IMG-20141216-00155.JPG
SOLIDWORKS Forums
13 hours ago
Issues Modeling Part I work with a company that makes uhmw guards for off road vehicles. I have been using weldments to draw a-arms(steel tubing).
SOLIDWORKS Forums
13 hours ago
Jive Software Version: 2018.7.0.1_jx, revision: 20180814200645.7fbf90c.release_18.7.0-jx
SOLIDWORKS Forums
14 hours ago
Weird Forceless Elongation My simulation is 2D and consists of a thin walled envelope with pressure applied to the internal walls. At the bottom left a semicircle is fixed in space.
SOLIDWORKS Forums
14 hours ago
We have 2 SolidWorks users and have never used PDM at this company. What are the pros and cons of implementing PDM Standard? Pretty sure we don't need Pro. Just deciding if going to PDM vs the Windows file system is worth the effort.
SOLIDWORKS Forums
15 hours ago
Re: How to create a mobious strip by single surface? Jive Software Version: 2018.7.0.1_jx, revision: 20180814200645.7fbf90c.release_18.7.0-jx
SOLIDWORKS Forums
15 hours ago
Hi, IT from school sent me info to install SW for free. He said that I could choose between 2016-17 or 2015-16. What is Student Engineering Kits? I only heard/used the Students version before.
SOLIDWORKS Forums
16 hours ago