Hi, I'm recreating a part from GrabCad. I followed the steps as closely as possible, when I get to the final step of thickening I can only make it 0.20mm thick but the original version is 1.5mm thick. Does anyone understand why my part can not be made thicker? Help would be greatly appreciated.
9 años hace
I'm using SW 2015. I have over 50 selected items that I want to unsupress in SW at once instead to unchecking each box. Is this possible? SolidworksModeling And Assemblies
9 años hace
You were right Ingvar Magnusson, in the "Advanced Surface Modeling" training manual there are a lot of exercises where models have to be made from sketch pictures. SolidworksModeling And Assemblies
9 años hace
Trying to extrude a mold cavity/core... but I get this note. "the sketch has no contour geometry." SolidworksModeling And Assemblies
9 años hace
How to fix: this operation is not supported because it will create invalid geometry. the bounding box of the geometry cannot be greater than 1000 meters SolidworksModeling And Assemblies
8 años hace
I recently created a blog post about using the number pad to streamline view manipulations. It goes into customizing SolidWorks, Abaqus and Catia. Hopefully this is useful. Unboxing Views in CAD |
8 años hace
Hi all, today the programs has started to show me this. . I'm not able to activate the automatic rebuilding on the assembly. The advertiing say to activate it on System option, but I really don't understand where this command is.. Does anyone know how to do?
8 años hace
after using 2 splines to Cut Extrude a solid why can't I edit the splines? is there a check box to "consume" them or NOT ? thanks SolidworksModeling And Assemblies
8 años hace
after using 2 splines to Cut Sweep a solid why can't I edit the splines? is there a check box to "consume" them or NOT ? thanks SolidworksModeling And Assemblies
8 años hace
HI team, My soildwork system hard disk was crashed .I change the new hard disk but soildwork was not activating it's showing license exceeded error .how to resolve the issue .please help me . by balachandar SolidworksModeling And Assemblies
8 años hace
Most answers to questions here can be found here: 2016 SOLIDWORKS Help - Introduction You can select which version from the dropdown (upper-right) SolidworksModeling And Assemblies
7 años hace
Hi Steward, Even if you can do this on the computer, your sprockets & std. roller chain won't last in reality. A round belt drive could work depending on your horse power requirements and design intent. Elmar SolidworksModeling And Assemblies
7 años hace
We just bought a tube laser, I'll have to model tubes to be cut and bend by hand. I saw a few methods to do that but I need the fastest way to do that. SolidworksModeling And Assemblies
7 años hace
Hi. Can anybody help me mate this pedal to its crankshaft in a way which it will allow it to rotate. I have been unable to do this. Message was edited by: Connor McGuigan That should be the assem uploaded correctly now SolidworksModeling And Assemblies
7 años hace
I have 2016 as the newest version right now so mentioning saves me the time downloading and attempting to open the file. Perhaps a 'macro or other' can be used to automatically post the version? SolidworksModeling And Assemblies
6 años hace
all of those dimensions could have been from the origin - as I said, we do not know the dimensions for this particular part. either way, please, for your own sake, fully define your sketches. SolidworksModeling And Assemblies
6 años hace
Also available iOS and Android https://www.crazygames.com/game/push 3D puzzles akin to fixing broken assemblies. SolidworksModeling And Assemblies
6 años hace
When I make an assembly I like to put the same type of parts in one folder. When you have a part and a linear component pattern for example you can't do this. Atleast not without dissolving the pattern, which is pretty inconvenient in my opinion. SolidworksModeling And Assemblies
6 años hace
We have parallel and perpendicular for lines, but only tangent for circles? Why no radial circle to line relationship? SolidworksModeling And Assemblies
6 años hace
Uhm... Isn't the term "master" a bit racist? Perhaps switch to "supreme model" or something like that. It could read, "Breaking a reference to the Supreme Model is streng verboten..."
5 años hace
I've decided to do something basic and just try to get it right. I found this giant pawn and I thought I would try to model it. If you measure something with a caliper and model it in solidworks how accurate does it have to be? Are the tolerances usually pretty liberal or does it have to have the exact dimensions of the original piece?
5 años hace
Historical moment Now (SW2018sp4 SPR_925552) it is possible, in-context parts don`t lose their links to assembly. SolidworksModeling And Assemblies
5 años hace
I am on SolidWorks 2016. I'm trying to delete the component features in the assembly tree, but, still keep the actual bodies. How do I do this? SolidworksModeling And Assemblies
5 años hace
Text sketch linked to property. After changing of property to update boss-extrude it`s necessary to edit feature. SolidworksModeling And Assemblies
5 años hace
