以下项的新增功能:

SOLIDWORKS 用户论坛

SOLIDWORKS 用户在这里发现、参与和共享 3DEXPERIENCE Works — SOLIDWORKS 桌面、云连接和纯云端。

只需使用您的 3DEXPERIENCE ID 登录。

Any idea how to use Toolbox structural members (for example DIN IPE-bars) as structural members in weldment parts ? .. Hope You all understand, what I'm trying to say ??
SOLIDWORKS User Forum
15 年 前
Is it possible to put in a mitred cut angle column on a weldment cut list, i.e. structural members that are mitred would have a column that specifies what angle they are mitred at.SolidworksWeldments
SOLIDWORKS User Forum
15 年 前
Hi, there is an option to avoid the extension figured in the attached image and without to use the trim/extend command ? We use lot of Rexroth profile and the trim/extend command weigh down to much the file. Thank you, AlessandroSolidworksWeldments
SOLIDWORKS User Forum
15 年 前
Hi, Elemento strutturale2 don't trim automatically and even with trim/extend command. I am wrong something or the only solution is using 2 cuts extrusion ? Regards, AlessandroSolidworksWeldments
SOLIDWORKS User Forum
15 年 前
hi all, I have created a weldment assembly. I have created its drawing and insert a relative view in which i have selected a parts which i need to show in drawing view. My question is what if i want to add a part in that view ? How can i add a part in to that relative view later on ?
SOLIDWORKS User Forum
15 年 前
Example: If I have a piece of tubing with angled cuts on each end - the cutlist gives me those angles. But, are they parallel or mirrored? Is there any way to specify what direction the angled cuts are in the cutlist without having to detail the part? thank you, SolidworksWeldments
SOLIDWORKS User Forum
15 年 前
Has anyone (other than me) had a problem inserting parts within weldments (it worked fine in 2008 but in 2009 The program is crashing every time I try to do it does anyone have any ideas? Thanks AlexSolidworksWeldments
SOLIDWORKS User Forum
15 年 前
How can I get my weldment parts to explode like in an assembly?SolidworksWeldments
SOLIDWORKS User Forum
15 年 前
hello, I am not sure if anyone else out there is having this problem i am using XP sp2 every time i open edrawing and try to open a drawing it immediately crashes any idea's? thank you DawnSolidworksWeldments
SOLIDWORKS User Forum
15 年 前
Has anyone exported their weldment bodies to a drill & saw line process? A company I work for use nc data files, which I don't see that SW can create natively. I've sent machined items before but weldment profiles only need cutting to length and holes drilled in the correct place.SolidworksWeldments
SOLIDWORKS User Forum
15 年 前
In the weldment cutlist there is a column property called Cut list name. How do you include this information into the BOM. I have added a custom prop named cut list name but I do not know how to create the expression so it will find this information. Please help ME!SolidworksWeldments
SOLIDWORKS User Forum
14 年 前
After I create a cut list on whatever sheet I'm on the views on that sheet are the only views that are tied to that cut list. When you go to another sheet the bubbles reset to item 1...What the Heck!!!
SOLIDWORKS User Forum
14 年 前
After inserting a weldment body into a part the sketch associated with that body doesn't stay with it as it is rotated and located differently on the sketch line. Does anyone else have this problem in 2009, because it didn't happen in 2008? Maybe there is an advantage but I don't see them as of now.SolidworksWeldments
SOLIDWORKS User Forum
14 年 前
HI EVERYBODY, ANYONE CAN HELP ME ON DIMENSIONING A WELDMENT DRAWING, I NEED TO PUT THE DIMENSION FORM THE SIDE OF THE STRUCTURE TO THE SIDE. NOT THE CENTER TO CENTER, USING 2006. THERE ARE ANGLUR, 2X2, 2X3 TUBING IN MY WELDMENT. THANKS A LOTSolidworksWeldments
SOLIDWORKS User Forum
14 年 前
i am working on a frame assembly that has multiple mounting pads that are teh same size and hole pattern. is it possible to add this pad to the design library? i have tried but seem to do it. anyone know if this is possible or how to do it? thanks TomSolidworksWeldments
SOLIDWORKS User Forum
14 年 前
Is it even possible to utilize configurations in Library Features/Structural Members?SolidworksWeldments
SOLIDWORKS User Forum
14 年 前
Hi, Is there any support for use of different materials on items in a weldment cutlist in a weldment part? There is different material standard names on pipes, squere pipes, plates etc. Regards YngveSolidworksWeldments
SOLIDWORKS User Forum
14 年 前
hi, Anybody know how I can put the "cut list item name" as an infill to a balloon in a drawing of a weldment part. I can select it as a column heading using the radio button in the column properties. But I cannot find it as a ballon fill.SolidworksWeldments
SOLIDWORKS User Forum
14 年 前
I have a machine that used an existing design. It has a welded base and on the existing design, due to size, some plates were machined and then welded at ass'y. My machine is smaller and I would like to add the plates to the base weldment. Can I do that or do I need to redo the plates & their features in the base?
SOLIDWORKS User Forum
14 年 前
Hey Folks, if you mirror A weldment part, is there anyway to get the cutlist to go with it? (please..)SolidworksWeldments
SOLIDWORKS User Forum
14 年 前
I am using 2009 sp 2.1. BBevel-Weld looks like pacman in Eview. They apear correctly in SW but in edrawings or solidworks explorer the symbol look like pacman. Is any one else seeing this?
SOLIDWORKS User Forum
14 年 前
What is the best way to create a drawing for each piece part in a weldment and have part numbers on each of them? ScottSolidworksWeldments
SOLIDWORKS User Forum
14 年 前
I have a frame drawn as a weldment file and I am wanting to insert a configured part file of a hub into the weldment. Well, I have inserted the hub and mated it (or added relations), but now I want to change the configuration of the hub to be a shorter length. I do not see a way of changing the configuration...has anyone accomplished this?SolidworksWeldments
SOLIDWORKS User Forum
14 年 前
Problem description: 1) In modeling, the cut list is correct, for Item No 8, the part Qty=2pcs, the total item is 15; 2) after made 2D drawing, Insert the BOM is like right form, For item No 8, the part Qty change to 1 pcs, add one item (No 16), and the Weight is 0. Is it a software bug? Anybody can help me?
SOLIDWORKS User Forum
13 年 前