探索 SOLIDWORKS 使用者討論的內容。
類別:
排序:
Drill symbol limit exceeded error When generating gerber files program throws the error: "Drill Symbol limit exceeded. System will switch to letter generation."
SOLIDWORKS Forums
6 天 前
I am facing issue while i am installing SolidWorks PCB Services while upgrading my SolidWorks PCB 2018 S.P.02 to SolidWorks PCB 2018 S.P.03, i don't know why it is happening like that but it is struck on 99% from 42 hours. It is not showing any error and on the same time it is not stopping the installation Do anybody has solution for this !
SOLIDWORKS Forums
7 天 前
I am struggling with creating a professional looking assembly drawing because I not sure how to get the layer to do what i am asking. I can get the gerbers out but i was trying to create the drawing with a title block. I can print a assembly drawing but have no way to add the title block or make it into a proper assembly drawing. I tried export to Solid Works itself but only can get the outline of the 3d models and not all the reference designators.
SOLIDWORKS Forums
20 天 前
I want to use the SVN functionality built into PCB for other files and programs. Has anyone setup TortoiseSVN to do this? I do not want to have separate servers/services running.
SOLIDWORKS Forums
20 天 前
Is there a way to change these default colors? Is there supposed to be an attachment?
SOLIDWORKS Forums
21 天 前
My users currently use Circuit Works to import IDF files in their workflow but since out 2018 upgrade Circuits Work wont handle patterns and folders anymore so I am looking for another solution. I am not sure if PCB can open old CircuitWork created project or import Allegro 17.2 files though. Has anyone else used Allegro in in the PCB tool?
SOLIDWORKS Forums
27 天 前
I am currently having an issue with one layer of the gerber’s outputs. I can export all layers but the bottom copper lay (which has polygon pours). I know it works because I tried it on a different program then I typically use (cam350 7.5), in Lavenir and it cam in as 3 layers. The first layer was the polygon pour outlines, the next was a origin box (I believe) and last was all my traces and pads.
SOLIDWORKS Forums
27 天 前
Disable Group Undo As it is now the system groups for example actions done when in the place wire command even if you terminate one segment and start a new one, if you undo this, everything that you did during this session is gone. I can't find anywhere in the preferences where this can be disabled.
SOLIDWORKS Forums
1 月 前
Layer Stackup Are there any plans of adding the possibility to put the Layer Stackup within the gerber-files like a table?
SOLIDWORKS Forums
1 月 前
I need to reach electronic components from SW PCB libraries? If you want take a component,
SOLIDWORKS Forums
1 月 前
I generated board files (Gerber x2s) for a design and the CM is saying the board files show multiple layers have the same physical location -and- that there are numerous instances of less than 3 mil space/trace. There are -no- such spacings space/trace and the stack looks fine. Someone explain to me what is going on, this is pretty strange. I need to get these files to the Contract Manufacturer asap.
SOLIDWORKS Forums
1 月 前
I'm trying to create a OR gate symbol and the tools are difficult to use. So my question is is there a place to get symbol templates like on the home tool bar "symbol templates", where you can add more to it. Its a single OR gate in the package (SOT-23-5), its just to have a more logically clear schematic.
SOLIDWORKS Forums
1 月 前
Can I use SW PCB (2018) interaction with previous solidworks (MCAD) versions? I wouldn't recommend it... There were changes in the backend database between 2018 and 2017.
SOLIDWORKS Forums
1 月 前
I have been asked to create wire bonds in a PCB assembly. I have the xyz coordinates of the start and finish points along with the wire bond length. Does anyone know how i can go about to get this done?
SOLIDWORKS Forums
2 月 前
I tried to install Solidworks PCB server I got following error. How to solve this error? ShellExecuteEx "C:WINDOWSsystem32dism.exe" /Online /Enable-Feature /FeatureName:IIS-WebServerRole /FeatureName:WAS-WindowsActivationService /FeatureName:WAS-ProcessModel /FeatureName:WAS-ConfigurationAPI /FeatureName:IIS-ISAPIExtensions /FeatureName:IIS-ApplicationDevelopment /FeatureName:IIS-ISAPIFilter /FeatureName:IIS-HttpRedirect /FeatureName:IIS-StaticContent /FeatureName:IIS-ASPNET45 /FeatureName:
SOLIDWORKS Forums
2 月 前
So can we actually design flex circuits in SW PCB? It says you can in the data sheet. But the options for it aren't in SW PCB (as far as I can see anyway). Board region stacks....
SOLIDWORKS Forums
2 月 前
I used a board cut to round the corners of my board and all seemed fine on the 3d view. Output the gerber files and all but here is my question the "board profile" does not show the board cut outs but the original rectangular shape. So how do the board cut work as far as producing gerbers? Can so one explain how to incorporate the rounded corners into the board profile gerbers?
SOLIDWORKS Forums
2 月 前
In layer stack manager I can delete overlay and solder mask/copper layer but there are 2 signal layer in minimum. Is there any possibility to create a layer stack with only one layer? Thanks for your answers in advance!
SOLIDWORKS Forums
2 月 前
Altium show these options. There are some option similar in Solidworks PCB? I need import ODB files and with .sum extension
SOLIDWORKS Forums
2 月 前
I want see the compatibility between SolidWorks PCB and Altium Designer. I have no problem to open Schematic or Library, but PCB have not same extension :
SOLIDWORKS Forums
2 月 前
Solidworks Electrical Licen Error Can anyone help me with this error and what steps can help me to resolve
SOLIDWORKS Forums
2 月 前
I installed the latest service pack (SP 5) from Solid Works 2017, but now my application doesn't work, what can i do? Contact your VAR so they can troubleshoot the problem for you. That's what they get paid for.
SOLIDWORKS Forums
2 月 前
Can you automatically generate PCB from EMN in 3D mode? You can use Circuitworks application to convert .emn to a 3D file.
SOLIDWORKS Forums
2 月 前
Hello, we use SW 2017 sp4.1 and AD 17.1.9 so we want to collaborate via Solidworks PCB connector. When i download PCB connector Add-inn from AD repository it ask me enter Solidworks PCB connector for Altium key. Can i only buy key for Altium connector, w/o Solidworks PCB. Our VAR can`t answer this question.
SOLIDWORKS Forums
2 月 前