探索 SOLIDWORKS 使用者討論的內容。
I'm getting to grips with solidworks 2018 and I've been trying to model a pair of nose pliers, yet I am having issues with how to connect the edges to create the curved profile of the pliers. (I'm starting by just doing the bottom half of one half of the pliers) Any suggestions on what tool/ feature that would be best for this sketch? Thanks!
SOLIDWORKS Forums
3 天 前
Is there a way to get the path length from a 3D sketch into a design table? The path length dimension tool works great for 2D sketches but is not available in 3D sketches? The only way i can do it is to use fit spline to make it one spline, then RMB and simplify curve, you can then dimension it.
SOLIDWORKS Forums
11 天 前
How can activate the tool sketch picture? Start a sketch then go to Tools>Sketch Tools>Sketch Picture..
SOLIDWORKS Forums
11 天 前
Referencing this threadHow to show dimension in fraction? I am trying to recall how to display 13 15/16" as 1' - 1 15/16" in sketch mode. (and 72" as 6')
SOLIDWORKS Forums
12 天 前
Hello thank you for reading this... I'm new in Solidworks and I have problem when do sketching which is I cant make a circle with dimension is 1000m diameter as shown in picture..Please somebody help me and sorry im not good in English SolidWorks will automatically add relationships (to "help" you) and I think there is a horizontal relationship between your big circle and the small circle to the left of it.
SOLIDWORKS Forums
13 天 前
I was wondering if there was a way I can change a contour sketch into a fully defined sketch. The reason why I ask is because in my previous extruded cut feature, I was using a contour selection. Now that I have my sketch fully defined, I want the extruded cut feature to revert back to using its fully defined sketch boundaries.
SOLIDWORKS Forums
18 天 前
I've come across something I've never encountered before and cannot seem to find anything related to it by searching the forum or by searching my help files. Whilst working within a sketch I have created a closed contour which consists of a mixture of arcs, splines and lines. I had this in a fully defined state and then offset the contour outwards by 0.8mm (it's a very small part) and I ended up with this weird little yellow box at two of my sketch intersections.
SOLIDWORKS Forums
18 天 前
Previous behaviour in SolidWorks was that when making a Hole Wizard (ie, counterbore, tapped hole), in the positioning sketch you could use Sketch Linear Pattern to lay out the points. I would arbitrarily pick an axis (usually the default one selected) and just enter the quantity of holes, then define the remainder of the geometry with conventional sketch relations and dimensions. Somewhere in the past few versions of SolidWorks, this changed, and now its like it is "fully defined" from the
SOLIDWORKS Forums
19 天 前
my SolidWorks is not working with sketching If you need help then more information is going to be necessary.
SOLIDWORKS Forums
21 天 前
No, there isn't a way to continue a spline, but there is a way to merge two sketched splines joined at the end. This will give you a single, longer spline. Start your second spline from the end of the first spline.
SOLIDWORKS Forums
23 天 前
Spline undo last point placed? Hello, does anyone know of a way to undo the last point placed on a spline sketch without exiting the spline please?
SOLIDWORKS Forums
23 天 前
Attached is a file i generated from a customers geometry. I need a wayin solidworksto create arc segments and lines from this path for our machinists. They use some old version of mastercam and say that the splines generate very huge file that our machines can not directly take due to memory in the machines, and DNC is not and option.
SOLIDWORKS Forums
27 天 前
Ok, so i created this spline sketch, but for some reason, it does not want to extrude at all. One half will, but the front half will not. Watch bellow:
SOLIDWORKS Forums
1 月 前
I am working on my favorite project creating hydraulic hoses for a feeder assembly. In trying to put together a master sketch for this assembly I have created a 3D sketch with the fixed points and I am running hose lines.With a cluster of hoses together it would be nice to be able to change the line colors for each hose within the sketch. Is this possible?
SOLIDWORKS Forums
1 月 前
This is a occasional issue that comes up and I don't know: I have fully defined sketches that "reverse" themselves occasionally. Below is an example.
SOLIDWORKS Forums
1 月 前
I have asked a similar question before, but to no avail. As an incentive I have enough spare points to avoid moderation so would be delighted to show my appreciation Our core business is Doors.
SOLIDWORKS Forums
1 月 前
Here I'm about to pull a smart dimension (the screenshot will not pick up the cursor) but I have a yellow mid point relation icon already. So is this a problem and how to I fix it ? Why I have the relation is a mystery to me. Re: Why can I not pull this diametion ?
SOLIDWORKS Forums
1 月 前
sketch reference I'm currently using solidworks 2016 sp5
SOLIDWORKS Forums
1 月 前
I think I know the answer to this as I tried to do it and the option was greyed out, but maybe someone else is getting different results. I did find a work around by just putting the sketch picture in one of the parts in the assembly, but it would be nice to be able to have one at the assembly level and I don't see why this is not standard. Have you considered inserting a virtual Part and placing the sketch in it?
SOLIDWORKS Forums
1 月 前
My Corner rectangle have no cross lines ? Did you turn them on? You need to check "Add construction lines" in property manager then select "From Corners".
SOLIDWORKS Forums
1 月 前
One of our users is having an issue where after creating a dimension either in a drawing or a sketch, the dimension tool turns off. So this ends up the whole process of adding multiple dimensions: As you can imagine, this is rather maddening.
SOLIDWORKS Forums
1 月 前
We just upgraded from SW2016 to SW2018 now the dimensioning tool doesn't behave as it did before. I used to be able to double click the dimensioning tool and it would stay active while I dimensioned my entire sketch. Now I have to keep clicking dimension for every dimension I add. I know I could right click and choose dimension from the context sensitive menu, but I just want to get the old functionality back.
SOLIDWORKS Forums
1 月 前
Scaling or resizing the inserted image is extremely difficult. The cursor remains in "relocate" mode unless you hove over the exact right place to get the option to move the scale line, same for hovering around the corner to resize the image. Seriously, sometimes it takes me close to 10 minutes just to get an image inserted, sized and scaled.
SOLIDWORKS Forums
1 月 前
Good Morning Solidworks Users, I have a question on modeling a part to support my quality control team at my company. I have to model a spring which has a variable pitch and a variable inner diameter of helix structure for every revolution.
SOLIDWORKS Forums
1 月 前