Assembly routing with design table problem I´m having a really annoying problem when trying to use an assembly with a design table attached on a pipe route.
SOLIDWORKS Forums
5 мин назад
In placing nameplates for devices on a panel enclosure layout, is there a way to set up the part to automatically generate a separate symbol on the page with the detail of what is on the nameplate? I'm thinking of some kind of attribute for the main part. Can I create custom attributes to use on a part?
SOLIDWORKS Forums
2 дн. назад
Every time I search for a manufacturer part or cable reference, the search tool already has filters in it that I don't need (i.e. the seach tool already has the class "Connectors" specified, the cable references search tool already specifies "size standard" as mm^2 which is a real problem since we only use AWG). I have to click "remove filters" for every single search I make. Over time, this has costed me hours of extra button pressing.
SOLIDWORKS Forums
2 дн. назад
I have Install SOLIDWORKS Inspection standalone 2017 or 2018 on my system. But i have used only latest version of SOLIDWORKS Inspection. If i am click on SOLIDWORKS Inspection 2017, then open 2018 version.
SOLIDWORKS Forums
2 дн. назад
It doesn't appear on symbols where there is more than one connector. Jive Software Version: 2016.3.10.4, revision: 20180516024324.179277c.release_2016.3.10.4
SOLIDWORKS Forums
2 дн. назад
I'm a user of PowerMill, and I'm trying to use SolidWorks CAM. SolidWorks CAM has different concep with PowerMill, so I'm little bit confused. I tried to make finishing tool-paths for the smooth curved surfaces, but I didn't know how to do.
SOLIDWORKS Forums
2 дн. назад
cosmetic thread change? cosmetic threads on my screws don't show with bump map etc. Are my toolbox parts too old (basically didn't copy never versions over them) or this things never had bump mapping?
SOLIDWORKS Forums
3 дн. назад
I'm trying to use pipe routing on SW18 with some very large pipes (700NB), first of all I can't find a pipe this big in the standard library, secondly when I try and drag and drop the next best flange (24') onto my model I get an error message saying 'Please specify valid routing component(s) to start the route', if I use a smaller flange there is no problem. Can anyone suggest a reason and a solution to this problem? cheers.
SOLIDWORKS Forums
3 дн. назад
In Solidworks Inspection Standalone I tried to make ballooning foe PDF document which is exported from solidworks. Smart Extract tool is not enable for this PDF we need to capture only using OCR. Is there any possiblity to make it work?
SOLIDWORKS Forums
3 дн. назад
Anyone have any experience using Solidworks CAM 2018 to post process to an older Haas VF0 and an older Haas Mini Mill controller? I see an option for a Haas VF3, but not the machines that we have. We just got these machines from a company acquisition and I have been out of the CNC game for some time, so I am trying to see what it would take to get these up and running quickly (is in if I need to purchase a standalone CAM package or something else).
SOLIDWORKS Forums
3 дн. назад
Cable tray doesnot follow path direction. i have attached file please check. I am facing problem with cable tray route.
SOLIDWORKS Forums
3 дн. назад
I am facing problem with routing of electical cable tray design. their is no error while create and save route, error shows up while reopening the file. i dont see any problem with route. i have attached file, please check.
SOLIDWORKS Forums
4 дн. назад
I'm hoping someone can help me get my 3DConnexion mouse running. The 3d mouse is the latest SpaceMouse Enterprise. I am running the latest driver, downloaded again today.
SOLIDWORKS Forums
4 дн. назад
I think the question is pretty straightforward. I'd like to add balloons and callouts on an Electrical BOM into which I have pasted a screenshot of the model.
SOLIDWORKS Forums
4 дн. назад
SolidWorks Electrical Slowing Down After upgrading from SolidWorks Electrical 2014 to 2016 my group and I saw a drastic decrease in performance in the software. Old projects could take a couple minutes doing almost any task, like moving a wire.
SOLIDWORKS Forums
4 дн. назад
I am having issues with the terminal blocks in my project. I initially started by adding terms individually for each of my signals going to terms. For example, I have a bank of Power Supplies, and on the outputs I added terminals for example:
SOLIDWORKS Forums
4 дн. назад
It gives me some options for fields to link to, but only a few of the many that I have bound in the report. I'm not sure how get any useful ones to show up. According to the help, it used for selecting an ID in te query to be used for navigation. i.e. if the query has available file_id, then you can select this ID for navigate to specifi file.
SOLIDWORKS Forums
5 дн. назад
I am using SolidWorks Electrical for the first time and am having trouble finding a catalog with MIL spec cables and wires. Could anyone point me in the direction of one? I am hoping to build up my library so I don't have to create these wires/cables every time.
SOLIDWORKS Forums
5 дн. назад
Is there a way to associate two cable cores connected to the same point? The black and blue wires cant be associated to a cable since there already one cable core associated at that point
SOLIDWORKS Forums
5 дн. назад
PhotoView Chain Link Having an interesting problem with chain link in photoview for rendering. Realview shows the chain link transparent, but photoview shows a weak image.
SOLIDWORKS Forums
6 дн. назад
metric pipe Jive Software Version: 2016.3.10.4, revision: 20180516024324.179277c.release_2016.3.10.4
SOLIDWORKS Forums
6 дн. назад
We just got inspection Pro 2018 and cannot seem to find any documentation about this topic. We use both CMM's and Video measuring devices.
SOLIDWORKS Forums
7 дн. назад
Computer is laptop Thinkpad P71 NVIDIA P3000 Windows 10, approved by Solidworks reseller IT cannot find cause
SOLIDWORKS Forums
7 дн. назад
Enable CircuitWorks Just installed/Upgrade for Student Version 2018-19. How do I enable the Add-Ins.
SOLIDWORKS Forums
7 дн. назад