Узнайте, что обсуждают пользователи SOLIDWORKS.
Категории:
Сортировать:
We just got inspection Pro 2018 and cannot seem to find any documentation about this topic. We use both CMM's and Video measuring devices.
SOLIDWORKS Forums
9 ч назад
Since updating to 2018, SW Inspection returns 0 value when tolerance is a +0 or -0. If a value is there, it is handled correctly. Ex 1: 2.000 +.000/-.005 returns values of Upper Limit = 0.000, Lower Limit = 1.995
SOLIDWORKS Forums
1 мес. назад
We evaluated the add-in but so far decided it is not worth it. Here is a list of frustrations that we faced. I'm putting these here in hopes of SW fixing these issues in later versions and we might reconsider:
SOLIDWORKS Forums
2 мес. назад
We are looking to purchase and implement Inspection but one of our problems is that it does not seem to have the ability to use a CTQ callout instead of the inspection balloon. CTQ's are one of those grey/gray area's in the standards but are required by our parent company. Is this something SolidWorks is working on implementing? Also would like the CTQ to setup as a symbol or add on button similar to the inspection balloon.
SOLIDWORKS Forums
3 мес. назад
Let's say I only want to have 15 dims on each tab of excel and one part I am measuring now have 45 dimensions. In my template I only have one tab there, is it possible to let solidworks inspection automatically export three tabs based on that one-tab template I have now?
SOLIDWORKS Forums
3 мес. назад
we are working with Inspection plug in in SWX2016. We have a lot og drawings with several sheets in one file. How can i choose one this sheet and prevent that Inspection beginning to set the ballons on the first sheet?
SOLIDWORKS Forums
4 мес. назад
I have MS Office 365 installed but the SW Inspection installer cannot find MS Excel. How do I point SW Inspection to the Excel application? Our VAR has told us that SolidWorks does not support Office 2016.
SOLIDWORKS Forums
4 мес. назад
I'm using Solidworks Inspection Add-in and when it auto balloons, it wont balloon values with words before the dimension. For example, it will auto balloon dimensions such as:
SOLIDWORKS Forums
4 мес. назад
We have project templates and excel templates saved in a network location. Instead of manually navigating to the file each time, is there a way to set a default file location like we can with drawing templates? This is for 2017 SP 3.0 with the SW Inspection add-in.
SOLIDWORKS Forums
5 мес. назад
I'm using a default template that comes with SW Inspection which it is "Large Logo Template". In that template there's a column called Sub-Type that uses the attribute "@subtype" and the information that the attribute put in the template is what I need, so I'm OK there. Now, I want to know if there's any way I can change the word "Diameter" in the sub-type column.
SOLIDWORKS Forums
8 мес. назад
Hi All, I got an error when exporting report. If I use non-variable measurement value (Pass, Marginal, or Fail) on SW Inspection and then I export it to excel, Why non-variable measurement value (Pass, Marginal, or Fail) become to zero “0”???
SOLIDWORKS Forums
9 мес. назад
I did a SOLIDWORKS Inspection work with my customer. We got an error when importing cmm reports. I am sending you an ScreenShot file. You can see the details in the ScreenShot file.
SOLIDWORKS Forums
10 мес. назад
I think it's amazing to input 3D PMI for Inspection 2018. But our SOLIDWORKS MBD need to creat drawings for Inspection to use.
SOLIDWORKS Forums
1 год назад
Does any body know how to add them in the screen not on the excel sheet? You need to use the SOLIDWORKS Inspection Standalone application and turn on "Measurement Input and CMM Data Import" in the options.
SOLIDWORKS Forums
1 год назад
Tolerance Settings, document defaults I have a question about the Tolerance Settings for the Solidworks Inspection 2016 addin.
SOLIDWORKS Forums
1 год назад
Problems with angular dimension tolerances. I'm evaluating a trial version of the SolidWorks Inspection 2016 Add-In. Regardless of what I set the angular dimension tolerance to, the tolerance that comes up once the drawing has been bubbled is +/- 12.7.
SOLIDWORKS Forums
1 год назад
Problems when exporting When i export from inspection to excel into my template the border only shows up on top and side the bottom stays border-less? Has anyone had this happen before?
SOLIDWORKS Forums
1 год назад
I'm evaluating SW Inspection Add-in, but I'm having some trouble: the most annoying problem is that it cannot recognize decimal separator (I set my system with decimal comma "," as separator) in dimensions' values
SOLIDWORKS Forums
1 год назад
Manually Ballooning... New to SW Inspection....my comments are possibly aimed at Performance Enhancement.
SOLIDWORKS Forums
1 год назад
I have a few users that are trying to use the Solidworks Inspection Add-in in Solidworks. The stand alone version functions fine and we have available licenses. We are running SW2015 SP3 and Inspection 2015 SP3. The inspection add-in inst even an option on the add in list and the icon is grey'd out.
SOLIDWORKS Forums
1 год назад
Inspection recognizing current config.? I am using the add-in version of inspection on a part with multiple configurations. Each drawing consists of a few views of only ONE (1) configuration with all views set to that config.
SOLIDWORKS Forums
1 год назад
Multiple Inspection Sheets from Same Drawing OK I have not found anything about this:
SOLIDWORKS Forums
2 лет назад
Inspection Sheet Formatting Difficulties I am using the Inspection add-in with SolidWorks 2016, exporting my dimensional data to excel. When establishing the measure sheet template, I am using the "Template Editor" located under the Inspection tab on the ribbon.
SOLIDWORKS Forums
2 лет назад
Project Property Token adding extra lines I'm using Solidworks Inspection 2015 standalone. I created a custom template and we have been using it for a bit over 2 years now.
SOLIDWORKS Forums
2 лет назад