Узнайте, что обсуждают пользователи SOLIDWORKS.
Категории:
Сортировать:
It gives me some options for fields to link to, but only a few of the many that I have bound in the report. I'm not sure how get any useful ones to show up. According to the help, it used for selecting an ID in te query to be used for navigation. i.e. if the query has available file_id, then you can select this ID for navigate to specifi file.
SOLIDWORKS Forums
3 дн. назад
I am using SolidWorks Electrical for the first time and am having trouble finding a catalog with MIL spec cables and wires. Could anyone point me in the direction of one? I am hoping to build up my library so I don't have to create these wires/cables every time.
SOLIDWORKS Forums
3 дн. назад
Can I display the "connection points" on components but not print them? I still want to see connection dots on wires. Project>Configuration>Graphics, I hit the drop down to "never" when I want to print, otherwise I use one of the other options to show them when I'm doing a drawing, that's how I handle it.
SOLIDWORKS Forums
3 дн. назад
In placing nameplates for devices on a panel enclosure layout, is there a way to set up the part to automatically generate a separate symbol on the page with the detail of what is on the nameplate? I'm thinking of some kind of attribute for the main part. Can I create custom attributes to use on a part?
SOLIDWORKS Forums
4 дн. назад
I have a cable assembly I've created that I want to use in another project that exists in our system...simple enough I just copy (CTRL+C) from one project and paste (CTRL+V) into the other. I've done this a hundred times in the past with no problem but now it doesn't work anymore... However now, there's issues all over, hard to see any real pattern but it appears:
SOLIDWORKS Forums
6 дн. назад
After dragging & dropping a symbol from symbol manager in multi-line schematic and after assigning a manufacturing part to it, the terminal numbers are not displayed in the multi-line schematic window For example if i drag & drop a relay symbol as shown below
SOLIDWORKS Forums
7 дн. назад
I need to change/edit default wire names used in SWE For example, if wire colour is violet I want to edit as Purple as we have some company standards to follow.
SOLIDWORKS Forums
7 дн. назад
Is there a way to associate two cable cores connected to the same point? The black and blue wires cant be associated to a cable since there already one cable core associated at that point
SOLIDWORKS Forums
13 дн. назад
Have you ever seen like this? Look in the downloads section on the customer portal. There is an EPLAN Macro converter there.
SOLIDWORKS Forums
17 дн. назад
manufacturer Hey folks, where can you change the information listed in the manufacturer data section for a symbol? Maybe I am not understanding your question correctly.
SOLIDWORKS Forums
18 дн. назад
I'm having an strange issue where wire numbers are not being consistently created because of something to do with cross references. Sometimes wire number are created based on the first page (which is ideal), but sometimes they are based on their position on the later page where the cross reference leads to. The pictures above is located on page 003, so the wire numbers on the right are correct, the ones on the left seem to be numbered based on page 013.
SOLIDWORKS Forums
19 дн. назад
The company I'm at will be switching most of its CAD over to PTC products (i.e. Creo) and I have been looking into our options for electrical CAD. I had not been able to find much info on compatibility between Creo/Windchill and SWE or a suitable alternative in the PTC software suite. However, my manager recently came across elecworks for PTC Creo ... which looks exactly like SWE. After some searching we found out that SWE was originally a white-labeled elecworks.
SOLIDWORKS Forums
21 дн. назад
In my schematics, I often have a black wire running parallel with a white wire. Both of these look like black lines in Solidworks Electrical, so it's hard to tell which wire is black or white. Is there a good way to differentiate these two and still have the schematic be readable when printed?
SOLIDWORKS Forums
27 дн. назад
SWE 2018 SP2 is returning a pipe ( | ) symbol instead of a comma in my BOM table. It was not doing this in 2017 and I did not edit any default settings. Can anyone tell me how to remedy this?
SOLIDWORKS Forums
27 дн. назад
So I am unclear what creates/enables the green borders in panel layouts. In addition to the box, it looks like footprints with the green also gain opaque properties which makes them easier to see over the rail behind them. So in the example below, CR429, SCR328 and 331 all have the border. SR348 and 325 don't.
SOLIDWORKS Forums
28 дн. назад
Origin-destination arrows automatically generate coordinates for their counterparts on a drawing. For example, an arrow will have an attribute 02 - (5B) to show that it leads to page 2, column 5, row B. I would like to add these coordinates in the BOM report to locate components' associated symbols (e.g. show that part # 9034-00230 is at 02-(8H) and 03-(10P)).
SOLIDWORKS Forums
1 мес. назад
Wire labels unavailable We recently purchased electrical schematic standard 2018 (sp2) after a trial using professional 2016 (unknown sp). After unarchiving the environment from the trial, I found the add/remove wire label option to be grayed out.
SOLIDWORKS Forums
1 мес. назад
Wire Label Problems So I have seen previous discussions about how equipotentials do not become wires unless connected and that wire labels do not become available unless a wire is formed. However, I am unable to get a wire label in this case and it looks to me like this equipotential is fully connected.
SOLIDWORKS Forums
1 мес. назад
I have a folder with a project that is not archived and I need to open it in solidworks electrical. Can you help me? Thank you in advance for your reply
SOLIDWORKS Forums
1 мес. назад
Solidworks Electrical with large monitor Hello, I would like some recommendations on getting a large [32"]
SOLIDWORKS Forums
1 мес. назад
We recently upgraded to SolidWorks Electrical 2018 and we seem to be having a small issue with our PLC symbols now. We had configured our automatically generated PLC symbols so that there was NO cross reference and the top and bottom but now the cross reference shows up (Picture below) and I can't remember how I got it to go away in the first place. I know that they can be hidden on a case by case basis but I would prefer they don't show up in the first place.
SOLIDWORKS Forums
1 мес. назад
Solidworks electrical addins Does anyone know of any plugins or addins for solidworks electrical that would streamline or improve projects lifecycle through a company.
SOLIDWORKS Forums
1 мес. назад
Does anyone have a set of symbols for Process & Instrumentation they'd be willing to share? An archive of collected symbols would be really helpful, thanks! Jive Software Version: 2016.3.10.4, revision: 20180516024324.179277c.release_2016.3.10.4
SOLIDWORKS Forums
1 мес. назад
While installing the stand alone SolidWorks Electrical software, once I hitInstall nowbutton in the Summary section, the next window that shows up says"Installation errors - Cancelled". I have tried this on 3 different PCs. Any ideas on what might be wrong? I have attached snapshots of the errors.
SOLIDWORKS Forums
1 мес. назад