새로운 기능 알아보기:

SOLIDWORKS 사용자 포럼

SOLIDWORKS 사용자가 3DEXPERIENCE Works - SOLIDWORKS Desktop, 클라우드 연결 및 순수 클라우드에 대해 대해 발견하고 참여하고 공유하는 장입니다.

3DEXPERIENCE ID로 로그인하면 됩니다.

You probably love the Recent Document List in #SOLIDWORKS. Great tool for opening files fast navigating to their location and so much more. But did you know you could do this? https://www.youtube.com/watch?
SOLIDWORKS User Forum
5 개월 전
Hi... I am creating cross section as shown above image. But I am facing issue in detailing view as you can see. I am getting a hole (cosmetic thread), which is not present in cross section.
SOLIDWORKS User Forum
3 년 전
SolidWorks 2020 SP 4.0 Is anybody having an issue where the scale shown in a drawing view's properties is high by an order-of-magnitude? In the example below, the actual scale is 1:5. If I clear that 1:50 and enter 1:5, the scale does not change (meaning: the view on the sheet does not grow or shrink). Thanks for any help.
SOLIDWORKS User Forum
3 년 전
Hi, I have an assembly of some storefront steel, and when I create a section view for it I am missing columns...does anyone know what this issue could be? It is really screwing me here. See the attached screenshot. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
I am trying to add dimension to attached 3d model. As you can see in the snapshot, I cant access the dimXpert, it is not active, I am fairly new to Solidworks. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
So I have designed a chassis for a trailer, but when i go to create a drawing the cutlist has merged different weldments together so my cutlist does not display properly. in the model you can see its merged/highlighted atleast 4 different types of material under the same weldment in the cutlist for some reason and i tried updating it which didnt change anything. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
the idea is generate something like this, were the ports, (holes)., are drawn into the cilinder heres a pic i already made the transfers, and look something like this., ---- but when i extrude the cilinder diameter. here is the result how can make the holes into the cilinder? also here is the archive .sldprt , if u wanna take a look,. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hi I have tried to fully define my sketch but I cant make it work with the arc. Do you have any suggestions? Thanks! SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
See this drawing? How do I move the crosshatch to the back? Tried using layers, but that did not work unfortunately, and I could not find a "send to back" option... Any info appreciated, Thanks SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hi, I have a drawing of a simple L-bracket. I am trying to flip the isometric so I can get the second view...how do I flip the isometric of a part when detailing? Thanks! SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
I have a surfacing model with a decal on it. How to show the decal on the 2D drawing? thanks SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hi, Does anyone know if SolidWorks can automatically add front, right, and bottom view labels in drawing based on the models orientation? See the attached image with the labels. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
When I try to mate two parts in X, Y & Z. I select the first two faces to mate it and it mates them properly. The problem is: it drops out of the mate function and I have to start all over and reselect the mate function. It does not repeat... Thanks in advance, Rich SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hello, I have problem, with arrows in drawing, when I'm saving to PDF or AI and other. Arrows are through side line - see attachment. Is it any way, how to repair it? On the screen in Solidworks it look all right, only in PDF etc. it is wrong.
SOLIDWORKS User Forum
3 년 전
Hi Guys, I did create a part sheet metal and apply appearance > Plastic > Mesh > Diamond Mesh Plastic. But, I can't seem to see the appearance into the part. What should I do in-order for me to see the appearance applied to the part. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hi all So I created a custom property called Thickness that pulls a value from the thickness global variable. The value shows in custom property as 4,50. But when I create a note and link it to this custom property of the component the note displays as 4,5000. Please see attached images.
SOLIDWORKS User Forum
3 년 전
I can't make the 25 to 25.000. Usually when I adjust the upper and lower tolerance to .123 the 25 should change but in this case it doesn't. What is causing this? SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
This part seems to be fine in Solidworks (2021), but when I try to make a drawing of the part, it crashes Solidworks every time, regardless of how I begin the drawing (open part > create drawing from part OR new drawing > insert part). It's sheet metal, but flattens well. I don't have much hair, but if I did, I would have pulled it all out by now. Thanks in advance.
SOLIDWORKS User Forum
3 년 전
I always used Acad and now for a while Solid works. See my sketch, does anyone have a hint for me how I can exclude the area inside the elbow? The checkbox “merge result” is not selected. And I can’t select only the area outside the elbow.
SOLIDWORKS User Forum
3 년 전
Hi, explaining this will get confusing, so refer to the picture. In my BOM, the column description says "SW configuration name, (configuration name). How do I get rid of this redundancy/change what the template column says for all documents? SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hi Guys, Why cannot I find the Arial in the choose font list? Acutally i have installed this font in my computer like the second picture... Thanks! PS.
SOLIDWORKS User Forum
3 년 전
Hi all, Is it possible to write a macro that automatically generates a jpeg in a isometric view (for every part or assembly the same view) Thanks in advance SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전
Hi, I am creating a BOM & weldment cut list from an assembly. However, my cut-list for the assembly shows the incorrect and fewer amount of parts. What could be the issue here? SolidworksDrawings And Detailing
SOLIDWORKS User Forum
3 년 전