Neue Funktionen in

SOLIDWORKS Benutzerforum

Ein Ort, an dem SOLIDWORKS Benutzer 3DEXPERIENCE Works - SOLIDWORKS entdecken und sich darüber unterhalten und austauschen, unabhängig davon, welche Version sie benutzen: Desktop, mit Cloud-Anbindung oder mit voller Cloud-Integration.

Melden Sie sich einfach mit Ihrer 3DEXPERIENCE ID an.

Hello, Solidworks throws the following error at me when I rebuild my model. However I cannot find this mate anywhere in the list. And I have deleted all unused mates already. What can I do?
SOLIDWORKS User Forum
2 Jahre Vor
Is it possible to change the listing order of configurations? T For example, say I want to show closed, then 50%, then open... Thanks for any help. SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Anyone have a model or know where i could find one of these? Grainger item # BUY0091543 Yes i have searched/googled all over, no luck. Any help much appreciated!!
SOLIDWORKS User Forum
2 Jahre Vor
Is there a setting or something that can give me my part design options back. Whenever I right click on a part or extrusion, the feature options (delete, move, etc.) don't come up on my external monitor but will on my laptop. How do I fix this? SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Operation sweep with twist leads to ends not joining as seen in image. How can I overcome this? As you could notice I have a gap between the spline ends. This is to ensure that the sweep with twist feature works.
SOLIDWORKS User Forum
2 Jahre Vor
I am trying to create a part which looks like in the image. My sweep function fails when I try to build a second helix on the first one. The error message as "Smooth path is needed for sweep with twist " Any suggestions would be highly appreciated. Thanks SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Hi, i'm a student and i would like to create a fuselage for a personal project, using solidworks. When i use the command LOFT and try to create a good shape, the curve guide doesn't help me to follow my profile, what i've wrong? SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Cool, thanks for sharing Alin. I wasn't really looking for a different method of processing though, I was asking how many people do we need to pay, including SolidWorks, to get SolidWorks to work correctly? When is SolidWorks going to be able to operate with files generated by a different version of itself? SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Talk to SOLIDWORKS Product Definition Managers NOW! Session starts in 1 minute at 3DEXPERIENCE World 2021 SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
I am trying to edit a "Sweep" that was created from two (2) 3D sketches. When I open the 3D sketch that contains the path to alter some of the points I recieve this message; I need to know is there a way I can remove the constraint from this spline and then edit the points? Keith SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Hi what is best approach to draw in solidworks should i draw this bar with holes in one plane or , should i create separate plans for both holes than start drawing holes. Thank you SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Update: You can now watch the recording for the SW2022 Preview. --------------------- Do not miss these sessions at 3DXW21: SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
This is to get a conversation going about your favorite method. Why do you use it? What are the limitations? What are the important features?
SOLIDWORKS User Forum
2 Jahre Vor
Hello everyone! I am new to Solidworks I have a problem with cutting an logo on curved surface Any advise? SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Hi. I have a flexible part that is defined in a flat context. When the part is assembled, it is flexed into position. What is the best way to achieve this in the model?
SOLIDWORKS User Forum
2 Jahre Vor
hello please, when creating an ansamble, after the 1st part/solid has been inserted, how do i rotate it ( let's say arround z axis ), before adding the 2nd part ? thank you SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Hi, I have two parallel planes. I want to make each end of an axis in between the planes to touch the nearest plane. Then, have an end of a spline to coincident with such end. What is the best way to do it?
SOLIDWORKS User Forum
2 Jahre Vor
HI, I'm a beginner in Solidworks surface modeling. I already created several models using surfaces and I need to improve them to an advanced level. So, can any of you provide me some drawings or links to practice my own? It will be very helpful...
SOLIDWORKS User Forum
2 Jahre Vor
i want to use hole series in assemblies but the problem is left holes made in hole series these are parallel but i need them perpendicular like right holes is it possible? SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
How i do a punch threaded hole in a sheet metal? I attached a picture. Att Gustavo Festa SolidworksModeling And Assemblies
SOLIDWORKS User Forum
2 Jahre Vor
Hi folks, as you can see in the video below I doing an animation in which it has two hub which is kind of blocked in the same position. It moves from one step to another but suddenly it returns to its firts position? Someone knows how to fix it? You can see the issue occuring by the time of 0,19sec.
SOLIDWORKS User Forum
2 Jahre Vor
Hi, I am trying to recreate this object in SW 2020. Tho don't know how to get started on that tube thing. Where would I start. Which features would I use or what sketch technique?
SOLIDWORKS User Forum
2 Jahre Vor
Hello, guys Seems my solidworks has some kind of bug. This bar on the left (as you can see in the picture) appears and I could't able to hide it. It doesn't appears in toolbars context menu and my motion manager tab doesn't appear as well. I've already tried to select it in toolsbar context menu altough it remains missed.
SOLIDWORKS User Forum
3 Jahre Vor
I know this shouldn't be this challenging, but I'm attempting to pattern a simple hole cutout along a rectangle sketch. I need the instances to be equally spaced along the sketch. A curve driven pattern doesn't seem to work with a sketch of four straight lines. What am I missing?
SOLIDWORKS User Forum
3 Jahre Vor