新增功能:

SOLIDWORKS 使用者論壇

SOLIDWORKS 使用者可於此探索、參與並分享 3DEXPERIENCE Works - SOLIDWORKS 桌面、雲端連線及雲端原生。

3DEXPERIENCE ID 登入即可。

We are currently running drop test studies. 1 Analysis willtake at least 170 hours to complete. We had power failures in thenight longer than our UPS can handle. Is there any way that we can save or capture the run process sothat we can start the anlysis from there if the power fails again. SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
I am modeling an assembly in Simulation 2009 and I havenoticed that the mesh seems to be incompatible between the solidsand the shells, regardless of whether they're touching or I createcontact sets or I create split lines on the shell. I'm concernedthat the parts are not connected in the model, which they aresupposed to be.SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
hi i want to add restraints as a torsional spring in betweentwo plates which is connected in the middle with a cylinder. i wantto restrict the motion of cylinder with the help of torsionalspring. how to do this... bcoz in connectors i can only find compression & tensionspring... please help..?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
is there any separate study for analysis of car crashdynamics...or we can do it through drop test... please suggest where i can find the solution for this?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
Hello every one, can any body tell me how the stability of a column with its basecan be determined. I have a column of 4 feet and an arm of 2 feetof the same section. I have designed a base for it and I want to know its stabilityusing SW simulation.SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
Does someone know how to calculate the Stiffness of a VirtualWall? On the manual there is written there should be an article inwhich is explained how to calculate the stiffness of the wall. Ilogged-in in the customer portal but I couldn't find it. Someonehas it or knows where it is located?
SOLIDWORKS User Forum
15 年 前
How can I change the tolerance of the mesh , I need toincrease it 30percent.SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
is there something called Non-Linear fatigue analysis, if itis there how to quantify that? give me some examples can solidworkssimulation handle it?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
When doing a static analysis, the large displacement flagpopped up. I then ran the analysis using the iterative technique.What analytical method is Cosmos using to do this? I read thatnonlinear studies let you choose whether to use Newton-Raphson ormodified NR. I saw no such choice when doing a static analysis, sowhat method is being employed here?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
Cosmos uses what iterative scheme for large displacement instatic studies? Nonlinear studies let you choose between NR and MNR. What is thedefault method used in a static study when the large displacementoption is selected?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
While running and FEA analysis on a chute I am receiving thefollowing error message: PCG iterative solver stopped status code 9: MATRIX_SINGULAR_OR_INDEFINITE may not have adequate restraints No results saved I have tried several restraint setups and all end up giving me thatsame error message. Does anyone know what this error message isfor? SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
I am running a thermal analysis with some LED's on a PCB. ThePCB has via's in it and this seems to be trouble with meshing asthe mesh must be smaller than .0035. Has anybody else done thisbefore and is there an easier way to simulate vias and coppertraces?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
I am wondering what exactly base excitations are and how theyare applied and what the meaning of the results that come out ofSimulation in a dynamic analysis are?SolidworksSimulation
SOLIDWORKS User Forum
15 年 前
I have solidworks 2009 premium but i cant find simulationpremium. I only have simulation Xpress ,wich is the basic. Do ihave to activate it or doesn't it come with the premium package?Some information please.SolidworksSimulation
SOLIDWORKS User Forum
14 年 前
hi all, is it possible to simulate sheet metal bending, forming, drawingand similar operations with solidworks simulation. 1)Is it possible to find formability of the sheet, 2)wheather sheet can hold the force? 3) or is it going to tear out? 4)will there be any wrinkles or cracks?
SOLIDWORKS User Forum
14 年 前
can anyone explain me Whats a rigid body mode and how is itimportant in dynamic analysis?SolidworksSimulation
SOLIDWORKS User Forum
14 年 前
Hi, I am building a catapult and want to do a stress analysison it. When i pick the restraints and the forces and click "meshand run" it says it failed. I don't understand why... If anyone hasa little time to spare could you open my file and see if you canget it to work?
SOLIDWORKS User Forum
14 年 前
I created a custom library and added materials. All was finefor a while, when I added a material that had Orthotropicproperties, the database library would not open any more and showedan error window. Has anyone seen anything like this before? Thanks, Brian Wixom SolidworksSimulation
SOLIDWORKS User Forum
14 年 前
I'm experiencing a problem simulating a torsional restraintwhile allowing radial deflection in a cantilevered shaft with anoverhung load. I've selected the cylindrical surface restraint andonly selected a circumferential restraint. The radial directiondeflection results are one or two orders of magnitude smaller thanexpected. Any advice on this matter?
SOLIDWORKS User Forum
14 年 前
I wanted to know time required to reach particulartemperature of pan when it is heated by electric heater, how shouldI do this?SolidworksSimulation
SOLIDWORKS User Forum
14 年 前
Has Anyone been able to find a optimization response quantityanalogous to the "worst case" PSI that simulation uses in it'sdefault stress graph for beams. I think it's like the von Misesstress. I have been through all of the response values that apearand none of them are as high as this "Worst Case" value.SolidworksSimulation
SOLIDWORKS User Forum
14 年 前
I have a shell model where some of the surfaces are split inorder to get matching nodes. When meshing none of the surface thathave been split are being meshed. All the no-split surfaces aremeshed. Does anybody know what the problem is and how it can besolved?
SOLIDWORKS User Forum
14 年 前
Hi, 1) I want to know exactly what is the solver that is being used inSWX simulation? 2) the results we are getting in SWX simulation is it local orglobal?SolidworksSimulation
SOLIDWORKS User Forum
14 年 前
Got some problems while running a stress analysis. It`s justa small assembly, but it taking forever to run a simulation. Foundout that the folder with the assembly that used to be 3 mb, now was20 GB!?
SOLIDWORKS User Forum
14 年 前