새로운 기능 알아보기:

SOLIDWORKS 사용자 포럼

SOLIDWORKS 사용자가 3DEXPERIENCE Works - SOLIDWORKS Desktop, 클라우드 연결 및 순수 클라우드에 대해 대해 발견하고 참여하고 공유하는 장입니다.

3DEXPERIENCE ID로 로그인하면 됩니다.

카테고리:
정렬:
Hi all, I was wondering if anyone uses the PDM M-Files to manage theirSolidWorks data. If you have/do, how does the history feature workwith drawing/model parametrics in SolidWorks. For example, if Iwere to rev a drawing by changing some dimension, will the historyshow what that dimension was before the rev? Any input isappreciated.
SOLIDWORKS User Forum
15 년 전
This is possibly a cross-thread of other questions asked. Can you get SW explorer to search sub-directories? It seems as though you can tell it which folder to look and that'sas far as it will go. I have common plates and want to do a where used through the systembut it will only search in the specified locations.
SOLIDWORKS User Forum
15 년 전
I was provided a rile containing a few thousand XYZ pointsfor a system center line. I was able to create an XYZ curve as apart. Now that I have this, I am looking for a way to identify allof the different radii along this curve. A would also like todetermine the arc length of each radii.SolidworksApi macros
SOLIDWORKS User Forum
15 년 전
Hi ALL, Please help. I would like SW to open my second page drawing template when Iselect ADD SHEET on the bottom tab. I had this set up before so I know it is possible but I can'tfigure out how to do it. Thanks!
SOLIDWORKS User Forum
15 년 전
I am working on an application in VB .net 2008 which worksfine aside from this issue. If I have an assembly or part open,Realview on, the part needs saving (*), and I save the fileSolidWorks crashes. I can catch the FileSaveNotify events but bythat point it is too late and SW crashes anway. Anyone see anythinglike this?
SOLIDWORKS User Forum
15 년 전
I have a BOM with more than 26 columns when I go to save theBom as an excel BOM it errors out is there a fix for thisproblem?SolidworksEdrawings
SOLIDWORKS User Forum
15 년 전
How can I change the spacing around the detail view letter(on the circle of the parent view) so it isn't so close to thearrows? I can't seem to find it anywhere... Thanks! SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 년 전
I'd like to see the weld detail box come up in some differentfashion so it doesn't block out most of your screen while it'sopen.SolidworksUser Interface
SOLIDWORKS User Forum
15 년 전
Is there a list of other variables you can use with equationsbesides dimensions. I saw an equations where someone was able tocontrol the number of instances in a linear pattern with anequation. I can't find a list of all the other things that can be controlledwith equations and what the proper syntax is for each of thedifferent variable types.SolidworksAssemblies
SOLIDWORKS User Forum
15 년 전
Hi I want to place a series of anglar dims in a drawing, all will beconcentric, like anglar ordinate dims. How do I place the text sothat all is readable from the center of the pitch circle, not thebottom right of the sheet? Sw rotates the text after I get 90 deg around and flicks it backafter 270 deg all so it is readable from the bottom right. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 년 전
I have Problem With SW 2009 is Very Slow in Performace AndTake Time for Zoming In and Out and it has many craching. If any one have any solution for this probledm Ahmed samy Design Engineer SW 2009 Sp0 X 64 Edition AMD Phenom 5Gb Of Ram ATI Radeon 2600 WINDOWS VISTA Ultimate X64 SolidworksAdministration
SOLIDWORKS User Forum
15 년 전
could someone do a macro to save a pdf of a solidworksdrawing every time i save? this is to save the "save as option"? i normally save the pdf,s in the same location as the solidworksdrawing. is this possible? thanks in advance.SolidworksApi macros
SOLIDWORKS User Forum
15 년 전
Did anybody notice that default appearances are not saving inthe part templates. I've tried numerous times to change the defaultappearance to carbon steel, even by specifying the material, but myfeature appearances keep turning back to plastic. My VAR said there is an SPR out on it. But it is a majorpain.SolidworksParts And Features
SOLIDWORKS User Forum
15 년 전
Is it possible to put in a mitred cut angle column on a weldment cut list, i.e. structural members that are mitred would have a column that specifies what angle they are mitred at.SolidworksWeldments
SOLIDWORKS User Forum
15 년 전
Yeah, I've read a lot of very interesting discussiosn ondrawing practices, and I know this is a SW forum, so I waswondering if there's a more approprate forum for asking GD&Trelated quesitons? (one that doens't require paying for amembership also) Thanks, BM SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 년 전
What is the best method to model a hole that is counterborethen tapped thru? Do I actually do it as 2 hole features? How do I put the callout on a drawing? Thank you.SolidworksParts And Features
SOLIDWORKS User Forum
15 년 전
Anyone can help pls! I'm trying to use DM to get the name of the drawingview refenceusing ISWDMView.ReferencedDocument... I've check the help but I'm kind of confused. what is the good way should I need to have a view selected 1st orshould I select it with DM or ??
SOLIDWORKS User Forum
15 년 전
Can anyone help with the properies for hydraulic oil?SolidworksFlow Simulation
SOLIDWORKS User Forum
15 년 전
We have just upgraded from 08sp4 to 09sp2. Straight away wehave been hit with two bugs - 1] Custom property data is not displayed on the "Cards" in theviewer window. 2]
SOLIDWORKS User Forum
15 년 전
After exiting isolate some components of an assembly arestill hiden. The graphics card is a FX570 and the driver are downloaded from SWsite. Is there any explanation for this?SolidworksAssemblies
SOLIDWORKS User Forum
15 년 전
When I try to install latest SPO2.1 I get a message that SW task scheduler is running which prevents the install. The task manager in windows shows No SW programs running. How can I install SP2.1? SolidworksGeneral
SOLIDWORKS User Forum
15 년 전
If you delete a sub-project from Vault Admin, will it deletethe files that are in that sub-project or move them to the upperlevel project? Thank you, Scott MooreSolidworksWorkgroup Pdm
SOLIDWORKS User Forum
15 년 전
In response to another forum post(https://forum.solidworks.com/forum/messageview.cfm?catid=19&threadid=15875&forumid=3),I posted a small video to explain the details of how conversion ishandled for legacy colors/textures and PW materials applied to thesame references. http://www.youtube.com/watch?v=KhoRHXKmPPsSolidworksPhotoworks
SOLIDWORKS User Forum
15 년 전
I have an assembly I just created in 2009 SP0.0. I made the assembly and saved it. Opened it back up and it is"hidden" all of the solid bodies are shown. I have tried control Q. When I insert this (assembly A) assembly into assembly B it makesassembly B dissapear also.
SOLIDWORKS User Forum
15 년 전