I have one data card set up for all my files (sldprt, slddrw, step, pdf, dxf). When I run a covert task (sldprt ->dxf) I want the data card variables to get transfered to dxf file. I managed to do this by converting slddrw->pdf and sldprt->step, but can't seem to get it work with sldprt->dxf convert task. I did add all my variables in the Task window under File Card (see image).
SOLIDWORKS Forums
18 小時 前
I'm trying to create a macro to change derived configuration name to default instead of the number. This is the before example.
SOLIDWORKS Forums
18 小時 前
I've been trying to split my part file into 2 parts and then assemble them back together as an assembly (the reason for this being that I need separate .stl files to print in multiple materials). For the uploaded file, the split function would split my part into 5 separate parts instead of what I want (and have done), which is to have 3 of the sections in one file and 2 of the sections in the other.
SOLIDWORKS Forums
18 小時 前
My cosmethic thread looks like this: I have "show all annotations" and "cosmethic thread" options enabled. You can see a very slight shade of thread, but this is almost impossible to see.
SOLIDWORKS Forums
19 小時 前
The bend lines were there in 2017, but in 2018 (SP3), they will not are not. I cant find any setting that displays the bend lines or the boundary box.
SOLIDWORKS Forums
19 小時 前
Hello, I'm trying to get the intersection point between a spline and a reference plane. The reference plane is created at an angle from the reference plane of the spline, so selecting both reference planes I can see an axis between them. Selecting the spline and the angled reference plane and using the measure tool it says"The two elements intersect".This is confirmed using the API of the measure tool.Is it possible to retrieve said intersection point?
SOLIDWORKS Forums
19 小時 前
I have this problem with my solidworks composer where I try to import a greenhouse model. Model is drawn in Solidworks 2018 en imported in Composer 2018.
SOLIDWORKS Forums
19 小時 前
I am looking for some buying information about digital drawing tablets and pens. I would like to purchase an entry level drawing tablet and pen. I totally want the pen to have an eraser end which I have done some initial research and found out not all pens for drawing pads/tablets have an eraser end. I use adobe Illustrator, some Photoshop, for most of my design/graphics work on PC.
SOLIDWORKS Forums
19 小時 前
my macro shall make as follows: 1. Then shall open the window to select the path where to save on the device (For example C:\Users\zm\)
SOLIDWORKS Forums
19 小時 前
Perhaps a bit off topic to this forum... My company is working on a content analysis tool that ‘recognizes’ pdf-based piping & instrument diagrams (PIDs). The tool will recognize different tags withtin each of the diagrams & help users contextually store & group their contents.
SOLIDWORKS Forums
19 小時 前
how to schedule backup of PDM archive folder. "Yes i know we can schedule SQL backup "
SOLIDWORKS Forums
19 小時 前
I'm new to SolidWorks. Just started my training yesterday. I'm a mobile phone designer, usually using Rhino, Catia V5, or AliasStudioTools to generate 3D files.
SOLIDWORKS Forums
19 小時 前
Custom Toolbar Has anyone been able to make a custom toolbar.
SOLIDWORKS Forums
20 小時 前
Hello SOLIDWORKS Power Users: For 1000 points and unlimited glory, solve this riddle:
SOLIDWORKS Forums
20 小時 前
solidworks electrical I would like to learn this tool, but I have very little information that would be possible if someone in the community could provide tutorials or support material.
SOLIDWORKS Forums
20 小時 前
Currently, my computer crashed and I was unable to deactivate our Solidwork license from the dead computer. As our license had been off subscription since 2017, the reseller insisted to charge me for the license deactivation.
SOLIDWORKS Forums
20 小時 前
Virtualtester account recuperation few years ago (2012) I was working for a VAR, and I have passed some certifications. I have changed company since, so I can’t access this e-mail anymore.
SOLIDWORKS Forums
20 小時 前
I'm working on a project using VBA to take information from a weldment cut list table, run it through an excel algorithm and spit the values onto a table in a new drawing document. I was wondering if it were possible to automatically open a new drawing document after running a macro from an active part document? Fatih Mehmet OzcanJul 20, 2018 4:46 AM(in response to Keng Munn Foong) This might helpNeed a macro for Assembly drawing
SOLIDWORKS Forums
20 小時 前
cosmetic thread change? cosmetic threads on my screws don't show with bump map etc. Are my toolbox parts too old (basically didn't copy never versions over them) or this things never had bump mapping?
SOLIDWORKS Forums
21 小時 前
driveworks I have got a Solidworks assembly and Drivework rules stored in my computer. Now I want to move or copy them to another directory to enable my colleague to use it.
SOLIDWORKS Forums
21 小時 前
I'm trying to use pipe routing on SW18 with some very large pipes (700NB), first of all I can't find a pipe this big in the standard library, secondly when I try and drag and drop the next best flange (24') onto my model I get an error message saying 'Please specify valid routing component(s) to start the route', if I use a smaller flange there is no problem. Can anyone suggest a reason and a solution to this problem? cheers.
SOLIDWORKS Forums
21 小時 前
First Column in Attached image is all sheet names in a Drawing File.Second Column is Description which was given Custom Property to corresponding parts.Now I had Editted in General Table.But varying requirements it's so much time taking.is there any possible way to represent all sheet names by properties in table???....
SOLIDWORKS Forums
22 小時 前
In Solidworks Inspection Standalone I tried to make ballooning foe PDF document which is exported from solidworks. Smart Extract tool is not enable for this PDF we need to capture only using OCR. Is there any possiblity to make it work?
SOLIDWORKS Forums
22 小時 前
I have some variables linked from data card to Custom Properties. Whenever I change the variables in data card, the changes are updated in the Custom Properties. This does not work another way as changing in custom properties wont update in data card
SOLIDWORKS Forums
22 小時 前