Sıralama ölçütü::
I want to develop an application about using edrawing2015x64 within the SW2015,but it fails SolidworksApi macros
SOLIDWORKS User Forum
5 yıl önce
I think we are asking the same question. I would like to pick, say 5 points on this spline and move them. You can not box the points and choose them, as far as I can tell. It would be similar to something called "pick walking" in other programs, and maybe possible in Solidworks in the Surfacing/Sub-D portions.
SOLIDWORKS User Forum
5 yıl önce
I want to write a note in the drawing of a part with the quantity of the component that is included into an assembly. the name of drawingi want to write a note with the quantity: PIPPO-01.slddrw the name of part: PIPPO-01.1.sldprt the name of assembly: PIPPO-01.1.sldasm it's possible? a macro? Thank for your help ! SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
Macro to open/activate part/assembly model from current active drawing similar to open part/assembly option when you click on a view. The macro will open model being referenced by first view. Download here SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
Here is a SOLIDWORKS Macro to zoom current active sheet within the current view port similar to Zoom to Sheet function introduced in SW2015. SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
Here is a macro I wrote long back for "Selecting Dimensions in a Drawing with Basic Tolerance". Sharing it might be helpful to someone. SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
Hi everyone i would like to create a macro who change the alternate name of all the composant in an assembly. The alternate name is the "part number displayed when used in a bill of materials". I got a macro to change the active document alternates names of all config.. How to get the alternate name of a child (component in a assembly)?
SOLIDWORKS User Forum
6 yıl önce
Is there a bug in documentation or where i can find all listed parameters for DSldWorksEvents_CommandCloseNotifyEventHandler? I catch int Command = 623 while closing Dimension Page and 17 while when rebuild the part. SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
Just use my library from this page Чтение свойств материала из закладки “Настройка” | StreamDivision (to downloac click "Скачать тут") SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
Here is my link. Video to demonstrate and "Скачать" to download Простановка номеров листов | StreamDivision‌ SolidworksApi macros
SOLIDWORKS User Forum
6 yıl önce
I made this VBA and have been using it. I went to use it again and got, "A serious error occured..." followed by a crash. Now I cannot edit it or use it. I have seen a similar issue where another user was able to open it and resave it to get the program to work.
SOLIDWORKS User Forum
7 yıl önce
whenever i attemp to add a part to my routing library i will have it open then, then when i open up my routing library manager and click "Routing Component Wizzard" and select piping and then whatever kind of part I will be adding it asks that I "launch Solidworks and open a part to continue" SolidworksApi macros
SOLIDWORKS User Forum
7 yıl önce
Hi I have multiple sketch contours in the plane but i selected single contour to extrude. While retrieving the extrude sketchsegments it returns all the sketch contours. But i need only the extruded contour. can anybody suggest it. SolidworksApi macros
SOLIDWORKS User Forum
8 yıl önce
Hope use API method. First hide note, Second display note. SolidworksApi macros
SOLIDWORKS User Forum
8 yıl önce
By manual method By manual mothod, change note color , see picture. I hope change note color with API method. SolidworksApi macros
SOLIDWORKS User Forum
8 yıl önce
Three different ways for receiving preview of model https://sites.google.com/site/wet72o/ViewModelInForm.zip I will show as it is possible to receive preview model in general without use of assemblies of solidworks a bit later. Hardcore programming))) p.s. no registration, no payment, opensource, OOP SolidworksApi macros
SOLIDWORKS User Forum
9 yıl önce
is it possible to capture points in a 3d sketch and export theX,Y,Z coordinates to excel? SolidworksApi macros
SOLIDWORKS User Forum
9 yıl önce
Hello Everyone, I am creating part and drawing from scratch by using API.I need to insert note in drawing to the specific circle.i am unable to get edge of circle by API.How to insert note at specific edge. Thanks SolidworksApi macros
SOLIDWORKS User Forum
9 yıl önce
Hi I am contracting so recently purchased a Dell M6600 Workstation for use on client sites when they don't have a spare workstation. I wanted to install SW2009 as this is the version my current client is using. Have installed SP0 Ok from CD and upon downloading SP5.1 and unzipped the files it does not install. Is there any workaround that will let me do this please?
SOLIDWORKS User Forum
9 yıl önce
I will delete this post shortly. I apologize if anyone was inconvenienced. Edit: OK, now that someone has posted a reply it looks like I can't delete it. Sorry!
SOLIDWORKS User Forum
9 yıl önce
I made a dxf macro that I thought I'd share. The other ones out there didn't do exactly what I needed, so I tinkered for a day. Click a view, run the macro. It saves a 1:1 dxf of the view with all annotations stripped in a DXF folder.
SOLIDWORKS User Forum
9 yıl önce
I knew I remembered doing it a while back, so for all of those previously asking, this is how to add and remove completely hidden custom properties without SolidWorks (using DM). http://www.angelsix.com/cms/forum/viewtopic.php?f=24&t=305 Luke Malpass AngelSix (SolidWorks Tutorials and Books) BatchProcess SolidworksApi macros
SOLIDWORKS User Forum
10 yıl önce
I had to share this with some fellow programmer geeks. I think this is hilarious. No offense to people writing VB.NET, but this is exactly how I feel when I have to get into it. The reason I think this is so incredibly funny is I had proposed C# to an old VB6 crony.
SOLIDWORKS User Forum
10 yıl önce
DS SolidWorks Corp is now using Visual Studio 2008 SP1 to build SolidWorks 2011. Microsoft Foundation Class (MFC) extension C++ addins or COM based C++ addins dynamically linked against MFC must be recompiled with the Visual Studio 2008 SP1 C++ compiler. Please contact API Support at apisupport@solidworks.com with any questions. SolidworksApi macros
SOLIDWORKS User Forum
11 yıl önce