Catégories:
Trier:
This problem has occurred after upgrading from SW2020 (SP.3) --> SW2021 (SP.3). Previously when I right clicked a part and rotated it with the mouse I believe it rotated about the part origin or the point on the part where I clicked (which feels intuitively for me). This way the part was kind of locked in translation when I rotated it. Now when I do this the part "flies away" as if the center of rotation is located very far away (I have checked, and the center of rotation is not the sub-assembly
SOLIDWORKS User Forum
3 jours il y a
SOLIDWORKS User Forum
3 jours il y a
Hello, everyone. In these pictures, I intended to split the tube into two parts by using particular lofted cut geometry. However, it turned out that the small part of the cut tube (the one inside yellow prism) also disappear, while I actually want to keep all parts as they are placed. How can I keep all parts while can still perform splitting on the tube?
SOLIDWORKS User Forum
3 jours il y a
Hi , I do a auto creat BOM in an exploded view, some of the parts i don't want it to appeal in BOM, how to set?i tried to suppress in 3D model, it does not work, thank you. jm
SOLIDWORKS User Forum
3 jours il y a
Hi Experts How can i join two edge flanges ? What is the tool used for this ?
SOLIDWORKS User Forum
4 jours il y a
Hi Experts I am trying to learn how to set up a library using a simple model I need to use the attached part when required in the assembly, by calling it from the library. The variables are Outer diamater (1" to 6"), Thickness (1 mm, 1.6 mm & 2.0 mm), Material (s/s 304 & s/s 316) and length of my choice. In essence, if i need a 3" s/s 304 tube with 1.6 wall thickness with a length of 1250 mm, i should be able to call it out from my custom content center . Can any experts give some directions ?
SOLIDWORKS User Forum
4 jours il y a
Hi Experts What is the best practice to make the flat pattern out of the part attached ? I understand that, a cut needs to be made to make it happen and i am looking for the best practice for the same. I used "extrude surface > thicken>rip" in inventor to do this . Part attached
SOLIDWORKS User Forum
4 jours il y a
I usually get this type of message in 3DNotification Center. I do not know how this works. Please explain anyone knows.
SOLIDWORKS User Forum
4 jours il y a
SOLIDWORKS User Forum
4 jours il y a
SOLIDWORKS User Forum
4 jours il y a
Does someone have a solution for overlapping dimensions seen in the pictures? break dimension is not the solutions I'm looking for, I'm looking for a solution demonstrated in picture 2. Hope some of you have some good suggestions
SOLIDWORKS User Forum
4 jours il y a
Hi, I wanted to convert this into a sheet metal so I can do a flatten command. But, I can't seem to do it or I just do not know how to do it. Can anybody help me with this? I want to attach the .iprt but could not do it.
SOLIDWORKS User Forum
4 jours il y a
Is there any way of getting searchable PDF's from SOLIDWORKS PCB? I'm thinking of the assembly drawing output specifically..
SOLIDWORKS User Forum
4 jours il y a
SOLIDWORKS User Forum
4 jours il y a
I have set the custom units of my part to microns. However, sketch dimensions and the "evaluates to" field of global variables is given in nanometers. Any ideas on how to make them show up as microns? (For example, the actual dimension of the inner circle shown is 500 um;
SOLIDWORKS User Forum
4 jours il y a
Can you not make a cut into a bend? I flattened this part, made my cuts, but now I can't "re-bend" my part because of the hole in the picture. The smaller one. As you can see, it finishes about halfway up the bend.
SOLIDWORKS User Forum
4 jours il y a
I'm trying to offload a simulation to another machine on my network (same domain). I've got the worker agent running on & am trying to find said machine on my coordinator machine via Manage Network in Simulate. I keep refreshing but the worker machine just isn't showing up; I've also tried to connect manually & get an error that the worker machine can not be accessed.
SOLIDWORKS User Forum
4 jours il y a
I'm looking for a good laptop that can best handle complex models for Simulation and Flow Simulation analyses ( Processor, RAM, Drive capacity, etc.) Any good suggestions would be appreciated. Thanks.
SOLIDWORKS User Forum
4 jours il y a
Hi, I have a macro that rebuilds drawings by zooming and setting things on or off. This has worked fine until we got very fast computers. Now when I run this macro it returns that the drawing will be saved in draft quality. if I step though the macro it works fine. Is there a way to add a waste of time loop so to delay or a better way?
SOLIDWORKS User Forum
4 jours il y a
Our electrical engineers currently utilize Microsoft Visio to create numerous 2d drawings (block diagrams, cable assemblies, etc.) I would like to have several variable (revision, drawing title, etc.) be populated based on the data card. However I cannot figure out how to map the variables from EPDM to my visio template. SOlidWorks says they can link to vsd files but for the life of me I cannot figure it out. Help.
SOLIDWORKS User Forum
4 jours il y a
How to manage hidden bodies of an assembly drawing view (not a multibody part drawing view) with SolidWorks API ?
SOLIDWORKS User Forum
5 jours il y a