新增功能:

SOLIDWORKS 使用者論壇

SOLIDWORKS 使用者可於此探索、參與並分享 3DEXPERIENCE Works - SOLIDWORKS 桌面、雲端連線及雲端原生。

3DEXPERIENCE ID 登入即可。

The tree Save Part (in external File) dialog window Open virtual part and get Save as dialog window So, here we see that these dialog windows are different. Save as dialog is nearly I need: "Assem1 Part9" or "Assem1_Part9" or "Assem1-Part9" or (some prefix case). So please make these dialogs equal and add option for prefix (suffix) and delimiter. Thanks in advance. SolidworksAssemblies
SOLIDWORKS User Forum
6 年 前
Don't let that change slip by you! So you can now make your Skeleton Sketch Part an Envelope and set this setting...Now SW won't allow part to part relations that aren't to that SSP. I haven't played with this yet, but it could really help the SSP workflow. SolidworksAssemblies
SOLIDWORKS User Forum
4 年 前
Could anyone please help me look at the assembly I attached? I was unable to rotate the leaves of the hinge subassembly within the main assembly. I have already made my subassembly flexible. SolidworksAssemblies
SOLIDWORKS User Forum
3 年 前
.....or not to use it. I am very leary of using Mirror Components in an assembly!! I usually add another instance of the part/sub-assembly and add the mates.
SOLIDWORKS User Forum
12 年 前
Anyone else find the new toolbox listing of to be awful? Why change it from ascending physical size order, e.g. M5, M6, M8 to a confusing numerical order, e.g. M1.6, M10, M12, M16, M2, M20. Makes fastener lists look completely illogical. SolidworksAssemblies
SOLIDWORKS User Forum
12 年 前
When I use to insert a part into an assembly it wouldautomatically position it so that the origins were coincident. Nowit seems to position it at the center of mass. Is there an option to change it back to aligning the origins? SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
This dialog box should not exist. I should be able to section my assembly in whatever way I choose. Solidworks, remove this from ever appearing. SolidworksAssemblies
SOLIDWORKS User Forum
9 年 前
SolidworksAssemblies
SOLIDWORKS User Forum
3 年 前
İs it possible to repair it. SolidworksAssemblies
SOLIDWORKS User Forum
3 年 前
After making a drawing of an assy an cicular pattern went screwed up. about 50% of the parts in the pattern were gone! nice work!! nice software! SolidworksAssemblies
SOLIDWORKS User Forum
12 年 前
How to make mirrored element, which will change shape (if Ichange original element) or location (if I change location oforiginal)? Now any mirrored element is floating, I mean I can drag him free. SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
When replacing a component on an assembly sometimes we Drop additional component/s from the library and it will be useful it the components that are replacing existing components could be selected on the feature manager window as well. SolidworksAssemblies
SOLIDWORKS User Forum
10 年 前
I find that if you reload sub-assmbly from the vault if there is a newer version of the sub-assembly in the vault with new parts in it, you don't get the new parts and so they show up as suppressed and your sub-assembly is screwed up.SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
The Mate PropertyManager likes to stay open, and I can understand this but maybe it should have a thumbtack so you can leave it open or not? SolidworksAssemblies
SOLIDWORKS User Forum
13 年 前
Working with SW 2007, I have a subassembly which has theright color for the two components. once I switch back to topassembly, cannot carry the same part color over. I cannot specifythe color in top assembly. I go through the motions and nothinghappens. is there options setting I dont have selected? thanks jasonSolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
Often when saving my assembly, and perhaps when Saving As (in orderto try something risky on the copy) I receive a message about otheropen documents, but I only ever have one document open at a time. Consequently I don't know to respond to the dialog. SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
Few days before I had seen some projects which is uploadedthrough various members. They had some problem to complete theproject.They were asking solution for that. Lots of people hadgiven solution. Unfortunatly I forgot that link.
SOLIDWORKS User Forum
14 年 前
What does brackets around a part in an assembly mean? Example[1234part]..SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
Welcome to the forum. If you mean you have the doors for the left side, and need some for the right side, use the "Mirror Components" function in the Assembly. After choosing the plane and components to mirror, click on the small blue arrow at the top of the PropertyManager, then select the "Create opposite hand version" icon near the bottom. SolidworksAssemblies
SOLIDWORKS User Forum
7 年 前
Top level Global Variables: Equations Part/Sub assembly in SW 2016: How looks like the same link in SW 2014 SP5 Screen Shot – 2015 What’s New in SolidWorks – Equations in Assemblies: SolidworksAssemblies
SOLIDWORKS User Forum
8 年 前
Hi, I am looking for an assembly of a document and photoscanner mecahnism complete with the drive, gears etc. I was lookingin the 3D Contetnt web page, but I did not find anything about.Does anybody has such an assembly? My e-mail isdjhammerheadbg@abv.bg. Thank you in advance!SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
Is there a list of other variables you can use with equationsbesides dimensions. I saw an equations where someone was able tocontrol the number of instances in a linear pattern with anequation. I can't find a list of all the other things that can be controlledwith equations and what the proper syntax is for each of thedifferent variable types.SolidworksAssemblies
SOLIDWORKS User Forum
15 年 前
Hi ALL, we have one assembly which have no of parts with partconfigurations, now i want to call same assembly twice in a main assembly but thatassembly parts should have different conf in each call... is it possible if yes please tell me the proper way?.. thanks in advance,,, SolidworksAssemblies
SOLIDWORKS User Forum
14 年 前
Can someone help me. This just starting happing to me within the past 2 days. Whenever I create a mate in an assembly, the mate menu opens up, I create my mate and then the menu closes. I have to reopen the mate command every time I want to continue mating.
SOLIDWORKS User Forum
8 年 前