Hello, Below is the link for downloading Beta, however it is not clear how to be done. Please advise. Thank you. https://www.solidworks.com/beta/beta-downloads.htm
This is the worst forum experience I've ever had in 25 years of using online forums. I just logged in today to find an old topic I posted and this is just terrible. Why was this platform chosen? I didn't think it was possible to get any worse than the previous Solidworks Forum, but you have managed to make a bad experience into a terrible experience.
Hello; The logo, is on the surface where the arrow points, I would rather not have it show up in the section view. This is all one component. I know with an assy I could hide the component, but how do you do this if it's just a feature?
My Command Module Moved and now floats and I cant get it back on top. I run 2019 and Ive tried everything I could find on internet to no avail.
Hey all, We are in the middle of a migration to Business Central (formerly known as NAV) and are seeking an ERP connector solution. We eventually want to get to a PDM solution but were trying to avoid that for now in the interest in keeping the CAD side as consistent as possible until we get through the bumps associated with the implementation of a new business system. The first solution we came across was CADLink, which is all we were looking for, but seemed a really hefty price tag for what it
Hi, I would like to ask how to design a certain part with bumps and curves. If anyone has an idea how to model please let me know. Any help will be greatly appreciated. Thanks, Jose A.
Does anyone know if there is / will be in the future a topology optimization for thermal? As in i want to minimize mass while also providing the maximum heat transfer?
I'm trying to add a 1/4 symmetric bolt (countersunk screw) to one of my models & keep running into an error (see screenshot). What am I doing wrong?
Recreation of a thread to bring it back on top. Does anyone know how to keep solidworks files from using memory even after they are closed? I attached a snip of my screen and you can see that I have no files open, but the task manager shows that the assembly is still using up over 3GB of memory. I have also noticed that if I open 1 part then a 2nd part and then close the 2nd part, the memory usage does not return to what was only being used in the 1st part.
I want to add lines in my exploded view to show the centerline path of the components. I don't need lines on all the components just the ones I select. Could someone point me in the direction of a lesson for this or let me know how to do this please?
I am looking for a macro to toggle off the thread callout within the tapped holes created with hole wizard. These always seem to get toggled back on & then when you generate the drawing there's all these incidental hole callouts from them. Really a pain to have to pick them and then delete them if there's several. This would be for those tapped holes already created & not for new ones.
The scheduled tasks fail because this .exe is missing. Also noticed it's the same problem why I could never uninstall from the client machine by running the StartSWInstall.hta file because it too needs the .exe which is not there. Is this normal? What did I mess up when I made the image to cause this?
When I attempt to make an assembly with other assemblies they will come in as a wire frame shaded (which is what I want). How ever if I add a few assemblies some of the parts in that assembly come in as wire frame only and I don’t want that. If I select the part it will display normally but when I hover over it it goes back to wire frame only. I can’t find a solution please help. it started this after I updated from 2020 to 2021.
As a test I was trying to optimize a table. I applied a load up top and fixed the bottom. The topology results basically split the table in two and there is nothing connecting the top to the bottom... did i set this up wrong somehow?
Is anyone familiar with getting weld data from Solidworks assembly files to MotoSim for programming/simulation? We are using Weld Beads in the assembly model to call out welds. We used to just call out welds on the print but decided to try indicating weld beads in the model when we started with Solidworks. In theory, this should help the tool room with weld fixture design and we were under the impression that MotoSim would be able to import the weld data for start/stop points to reduce manual
Hi Folks, I am working on a master properties macro, and I am running into a limitation of the macro with parts/assemblies that were forgotten to be checked out (PDM Pro). If you forget to check out the part before you run the main macro, there are values that are not saved upon closing the macro and you will have to reenter the values after the part/assembly is check out. So, my next addition to the macro is to add a check out button to this master properties macro. I have been able to check
Is there any option that from SolidWorks SNL manager we can forced to release a borrowed license of a client system?
