Categorie:
Ordina:
Hi, I can link mass properties to a drawing with no prob. however, Ineed to link indivedual parts from the assy to display seperatly. example: assembly consisting of two parts. part 1 & part 2. theDrawing will display the entire asembled model. I create a note to display: Wt. prt 1 = xx.xg Wt. prt 2 = yy.yg Total assy wt = zz.zg When I attempt to select the configs only one of the configsdisplays in all three settings. SolidworksGeneral
SOLIDWORKS User Forum
12 anni fa
Hi All My intention is to get some data from the table VariableValue intoour ERP system via SQL Trigger. My trigger works well, when Iupdate data in SQL server (update) directly. Unfortunately, when Ichange a value through PDM, I receive always the error message"Could not write card data into file - this can happen if the fileis used from another application" (translation from german - printscreen enclosed). It looks like that PDM detects the trigger as anexternal application.
SOLIDWORKS User Forum
12 anni fa
could someone tell me how to put my own picture into thebackground when i render something? thanks.SolidworksPhotoworks
SOLIDWORKS User Forum
12 anni fa
Does anyone know a way of having an assembly's weight notinclude certain items that are in the assembly that may be forreference only? I design attachments for heavy equipment and some of my assembliesshow the machine for reference or design purposes only. However, onthe drawings, I do not want the weight of the machines to beincluded in the attachment weight. Any suggestions?? GuitarmanSolidworksAssemblies
SOLIDWORKS User Forum
12 anni fa
On my computer i have two hard drives. The C: drive has 32bit XP And all 32 bit program files The D: drive has 64bit XP and all 64 bit program files including64bit SW I have an assembly saved on the D: drive and while using 32 bit SWfor some reason the search paths for the tool box are looking forthe toolbox on the D: drive. The search paths for both systems (32 and 64 bit) are both set tolook for the tool box on the C: drive by default. But which everhard drive the system is booted from turns
SOLIDWORKS User Forum
12 anni fa
Mastercam is failing to work these areas; is there a way toclean-up these areas? I tryed to make/replace new surfaces in these areas (1&2) tomaybe clean up the curvature transitions but nothing seems to work. Thanks!SolidworksSurfacing
SOLIDWORKS User Forum
12 anni fa
Hi, Most of the drawing templates I use are landscape. I save thedrawings to pdf and they are printed by an automated system thatcan't tell if a document is portrait or landscape. Is there a way to save a landscape drawing as a pdf that is rotated90°? This way the file would print without being "squished".
SOLIDWORKS User Forum
12 anni fa
SOLIDWORKS User Forum
12 anni fa
Hi, Is there any possibility to combine properties in a cut list cell? I want to have a column named: WxLxD, witch is three different properties. I thought of something like: "D1@Sketch1@test weld 2.SLDPRT" x D2@Sketch1@test weld 2.SLDPRT x D1@Extrude1@test weld 2.SLDPRT. I have managed to get these values out to the cut list , -but inserted in three different columns.
SOLIDWORKS User Forum
12 anni fa
Hello, I'd like to be able to import an rfa model - which I believe is a3D model type used by Revit for library items - into SW. I knowthat Revit can export a .sat file, but of course I don't haveRevit. Does anyone know of a third party converter? Preferably freeware?
SOLIDWORKS User Forum
12 anni fa
Is there a way to turn the scroll bars back on in 09? It isgrayed out in options.SolidworksGeneral
SOLIDWORKS User Forum
12 anni fa
Hello together, I'am just writing an AddIn for creating an Excel BOM from anAssembly. It looks almost fine but our Customer wants to see Weldment Cutlistin it if there are Weldmentparts. Problem: I have a IedmFile7 object and must check if it is a Weldmentpart.If it is one, then I must identify all data from the Cutlist andwrite it to Excel too. I wondert that the IedmBomMgr class don't noticed my Weldment BOM.
SOLIDWORKS User Forum
12 anni fa
Why, after using toolbox to insert nuts & bolts allmorming, would I get an error message stating "error readingtoolbox part. Description= You dont have permission to perform thisaction" as I am trying to insert another nut or bolt?SolidworksAssemblies
SOLIDWORKS User Forum
12 anni fa
Hi All I have one problem and one question I have many drawings made in SW 2008 When I Installed 2009 S.P 0.0all files opened normally and I worked with then in the newversion, but when I open again some files , the software send amessage SW have fatal error and it must be restarted. and I cantopen this files Again!! I have lost many information with this problem` The quiestion is, Does anyone know if SP 2.0 solved the problemwith 1:1 scale and scale in select option? Thanks by your
SOLIDWORKS User Forum
12 anni fa
The part shading is derived at the document level, ie:tools/options/document properties/colours, etc In some instances, the colour in the drawing doc is the same as thepart. However, within the same page of the same drawing doc, otherparts do not reflect the part colour. This usually applies to section views, the core colour, but it alsooccurs with surfaces in some cases. And I mean different.
SOLIDWORKS User Forum
12 anni fa
I have a strange problem. Whenever I sketch a circle andrevolve it to make an o ring, then do a save as. Solidworks shutsdown. Please help?SolidworksEdrawings
SOLIDWORKS User Forum
12 anni fa
hi , when i try to right click on the results folder in SWXSimulation-2009 and try to go for the "define design scenariograph" i am not getting it what is the reason. also the study isrun and graphs are defined when i open them it says "database notfound" why is that? also this is one of the lessons on the cosmos lesson from themanualSolidworksSimulation
SOLIDWORKS User Forum
12 anni fa
Hi all, I've been contemplating getting a mobile workstation. For better orworse I'm looking at Dell; good performance from them in the past.I'm after solid performance over a three year payback. And lookingat getting a better graphics card or additional ram with money'saved'.
SOLIDWORKS User Forum
12 anni fa
Hi, I am wondering if a pt. cloud data file (*.xyz) can be saved as anExcel file containing data points? Using the ScanTo3D add-in, Iimported a pt. cloud file and created a mesh. The person I am sending the file to uses Pro/Engineer, and we havenot decided if it is better to create the surfaces in SolidWorksbefore exporting the file, or just create the curves and let himcreate the surfaces in Pro-E from the exported IGES file(containing the curves). As he would like to see the points from the pt
SOLIDWORKS User Forum
12 anni fa
I am currently testing putting data into SWPDME2009, and for someold DWG files (maybe ACAD2002 or older), there appears to be achild relationship to a .dib file that is not being found whentrying to checkin the DWGs. There are no DIB files in the locationI am copying the DWGs from. What is a dib file, and should I be concerned? Jason SolidworksSolidworks Pdm enterprise Pdm
SOLIDWORKS User Forum
12 anni fa
Andy, Please, explain why do we need the virtual pipes and routes? I copied from SW2009 Help: Virtual components are saved internally in the assembly file inwhich they are created, instead of in a separate part file. Whenyou create components in the context of an assembly, the softwaresaves them inside the assembly file as virtual components. Later,you can save the components to external files or delete them.
SOLIDWORKS User Forum
12 anni fa
When RealView graphics is turned on (SW 2008 SP5.0), how does onerotate the appearance that has been applied? There is a control forthis when RealView is off, but I can't find one with RealViewturned on. e.g. Apply a woodgrain appearance to the sides of a box, thenrotate the texture so that the grain runs around the box. It must be easy... TIA, David. SolidworksPhotoworks
SOLIDWORKS User Forum
12 anni fa
Hi all, I just upgraded to SW 2009 SP2. I have a part that I want to mirrorand have a left and right version. I tried using mirror part butended up with 2 separate files. So I tried a configuration.
SOLIDWORKS User Forum
12 anni fa
We are having problems reading part files in mastercamx3SolidworksEdrawings
SOLIDWORKS User Forum
12 anni fa