Co je nového v

Uživatelské fórum SOLIDWORKS

Místo, kde uživatelé SOLIDWORKS objevují, zapojují se a sdílejí vše, co se týká 3DEXPERIENCE Works –⁠ ať už využívají desktopovou verzi SOLIDWORKS, propojení s cloudem, nebo čistě cloudovou podobu.

Jednoduše se přihlaste pomocí 3DEXPERIENCE ID.

Kategorie:
Řadit:
We are a new company still setting up Standards andProcedures. We had been doing our weldments like assemblies to begin withbecause OUr SW dealer didn't sell us on weldments because theytalked about it like structural members etc. and we are a heavyequipment manufacturer and our weldment consist of Heavy platesetc....very little structural members. We subcontracted some work out and this guy suggested that we useweldments functionality to deal with our "weldment" We bought whathe was selling. I
SOLIDWORKS User Forum
15 roků před
I'm interested in modifying a property that I have set up in thepart and assembly templates....but I don't want to open everydrawing to do it... You can imagine that I have a directory of parts and assembliesthat are standard parts.... And I copy some of them...and theirassociated drawings to a new folder... This new folder is specialfor a PROJECT.
SOLIDWORKS User Forum
15 roků před
Hello there? I am just creating an AVI of an assembly, but at all my AVIs mergesimilar colours together which reduces the qulaity of theanimation. I have checked and created AVIs with full frame nocompression, using both screen capture and Photoworks renderers,but to no sucess. Has any one every created good quality AVIs fromSW?
SOLIDWORKS User Forum
15 roků před
Hi All, Is there a way in solidworks by which we can model say 1000mmlenght 20mm od 3mm wall thickness (all dimns are for referenceonly) hose which should be flexible and i should be able to fixthis between any 2 points of any assembly. No Calculations shouldinvolve. Regards SolidworksParts And Features
SOLIDWORKS User Forum
15 roků před
We are currently running drop test studies. 1 Analysis willtake at least 170 hours to complete. We had power failures in thenight longer than our UPS can handle. Is there any way that we can save or capture the run process sothat we can start the anlysis from there if the power fails again. SolidworksSimulation
SOLIDWORKS User Forum
15 roků před
Can anybody tell me what "Dimension font sizes" to use forthe different sizes drawing documents - varying from A4 up to A0?Is there maybe an ISO standard where these things are listed? I'mcurrently setting up new drawing templates and would like to do itright!SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 roků před
Hi Sushil, I'm not sure I understand your question. Could you provie anexample of what you need? Regards, JoySolidworksSolidworks Pdm enterprise Pdm
SOLIDWORKS User Forum
15 roků před
I get a "No Geometry" message when importing an Orcad IDFfile into CircuitWorks (see attachment). I have sent the problem to my VAR (NTCADCAM) and received thefollowing: At the moment the problem with this file set is that eachinstance of the missing components does not have a correspondingentry in the library file (.emp) for each part number. For examplethe "SM/CAPC1608M" component has multilple entries in the .emn filewith different part numbers 100nF, 10nF, 47pF etc. In order forCircuitWorks
SOLIDWORKS User Forum
15 roků před
Any idea how to use Toolbox structural members (for example DIN IPE-bars) as structural members in weldment parts ? .. Hope You all understand, what I'm trying to say ??
SOLIDWORKS User Forum
15 roků před
This is a strange question, I know. Is it possible to print aSW drawing to a file that I can sneakernet to another PC that doesnot have SW and print it there? I have a drawing that has somecolor in it and I would like to print in on my color printer athome but I'd rather not have to install SW on my home PC. Any ideasguys?
SOLIDWORKS User Forum
15 roků před
Hi all I am having a problem searching for parts and drawingsin Explorer. Yesterday it was searching just fine now. Itssearching but only in my local c: drive. How do i change this topermanitly search from our server drive?
SOLIDWORKS User Forum
15 roků před
I am modeling an assembly in Simulation 2009 and I havenoticed that the mesh seems to be incompatible between the solidsand the shells, regardless of whether they're touching or I createcontact sets or I create split lines on the shell. I'm concernedthat the parts are not connected in the model, which they aresupposed to be.SolidworksSimulation
SOLIDWORKS User Forum
15 roků před
I need some help with getting a flat pattern of this cone. I've not done any sheet metal in SW so I'm at a complete lost as towhere to start. I've look in this forum and tried several things to no avail. Any help would be appreciated.
SOLIDWORKS User Forum
15 roků před
I am working on a stair assembly with a hinged handrail. thehandrail sub-assy has an angular limit mate on the hinge. I haveinserted it into the top assembly, made it flexible. It worksgreat... but then I save the assy with the handrail in the uprightposition and next time I pull it up the handrails are down. Anyideas?
SOLIDWORKS User Forum
15 roků před
Hi I have about 15 different configs of a part but I want to put eachone in a seperate drawing file using the config name as the drawingfile name and drawing number. Is it possible to do this and havethe configs link to the relevant drawing file when I want to openor find it. I don't want to use multiple sheets if I can help it. regards DSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 roků před
hi i want to add restraints as a torsional spring in betweentwo plates which is connected in the middle with a cylinder. i wantto restrict the motion of cylinder with the help of torsionalspring. how to do this... bcoz in connectors i can only find compression & tensionspring... please help..?SolidworksSimulation
SOLIDWORKS User Forum
15 roků před
is there any separate study for analysis of car crashdynamics...or we can do it through drop test... please suggest where i can find the solution for this?SolidworksSimulation
SOLIDWORKS User Forum
15 roků před
I design Vacuum forming tools that require a plug assist tohelp draw film down into cavites. The plugs need to have the sameshape as the cavities except the male radii on the plug will belarger and the plug needs to have a offset of anywhere from a 1/16"to 1/4" depending on the tool. The way I am currently doing this isin an assembly I create a new part and start offsetting thesurfaces of the cavity. Next I extend and trim the surfaces sothere are no gaps and knit into a solid.
SOLIDWORKS User Forum
15 roků před
hello ive drawn a cabinet that needs company logos down each side i put the logos on to the cabinet in photoworks which in turn putthe logo on the model and in the drawing ,but what i would like todo is print the drawing with the logo and existing dimensions butwhen i print the drawing the logo disapears johnSolidworksPhotoworks
SOLIDWORKS User Forum
15 roků před
Hello, Can someone tell me how to save/record an animation? I am usingPremium version 2007. I am under the configurations tab in myassembly then I right click on the "ExplView1" and the click"Animate Collapse". A dialog box appears and I can animate myassembly but the record button is always grayed out.
SOLIDWORKS User Forum
15 roků před
I posted this on the General forum but the problem is gettingworse. I attached an example drawing that is D size. The lines are heavyand the drawing is stretched. This is happening in SW 2008 and 2009with all service packs.
SOLIDWORKS User Forum
15 roků před
Hi all, I was wondering if anyone uses the PDM M-Files to manage theirSolidWorks data. If you have/do, how does the history feature workwith drawing/model parametrics in SolidWorks. For example, if Iwere to rev a drawing by changing some dimension, will the historyshow what that dimension was before the rev? Any input isappreciated.
SOLIDWORKS User Forum
15 roků před
This is possibly a cross-thread of other questions asked. Can you get SW explorer to search sub-directories? It seems as though you can tell it which folder to look and that'sas far as it will go. I have common plates and want to do a where used through the systembut it will only search in the specified locations.
SOLIDWORKS User Forum
15 roků před
I was provided a rile containing a few thousand XYZ pointsfor a system center line. I was able to create an XYZ curve as apart. Now that I have this, I am looking for a way to identify allof the different radii along this curve. A would also like todetermine the arc length of each radii.SolidworksApi macros
SOLIDWORKS User Forum
15 roků před