Şuradaki yenilikler:

SOLIDWORKS Kullanıcı Forumu

SOLIDWORKS kullanıcılarının 3DEXPERIENCE Works: SOLIDWORKS masaüstü, bulut bağlantısı ve saf bulut hakkında keşif, etkileşim ve paylaşım yaptığı yer.

3DEXPERIENCE ID'nizle oturum açmanız yeterli.

Sıralama ölçütü::
Can anybody tell me what "Dimension font sizes" to use forthe different sizes drawing documents - varying from A4 up to A0?Is there maybe an ISO standard where these things are listed? I'mcurrently setting up new drawing templates and would like to do itright!SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Hi I have about 15 different configs of a part but I want to put eachone in a seperate drawing file using the config name as the drawingfile name and drawing number. Is it possible to do this and havethe configs link to the relevant drawing file when I want to openor find it. I don't want to use multiple sheets if I can help it. regards DSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Hi ALL, Please help. I would like SW to open my second page drawing template when Iselect ADD SHEET on the bottom tab. I had this set up before so I know it is possible but I can'tfigure out how to do it. Thanks!
SOLIDWORKS User Forum
15 yıl önce
How can I change the spacing around the detail view letter(on the circle of the parent view) so it isn't so close to thearrows? I can't seem to find it anywhere... Thanks! SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Hi I want to place a series of anglar dims in a drawing, all will beconcentric, like anglar ordinate dims. How do I place the text sothat all is readable from the center of the pitch circle, not thebottom right of the sheet? Sw rotates the text after I get 90 deg around and flicks it backafter 270 deg all so it is readable from the bottom right. SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Yeah, I've read a lot of very interesting discussiosn ondrawing practices, and I know this is a SW forum, so I waswondering if there's a more approprate forum for asking GD&Trelated quesitons? (one that doens't require paying for amembership also) Thanks, BM SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
I thought there was a way of unloading drawing sheets inSW09? Can anyone tell me how to do this? Thanks, WayneSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Is there a way of opening up more space to create a largermodel? I am trying to layout a jobsite for a river dredgingproject, and I need to create a land mass that's about 5000 feet by3000 feet. When I try to dimension the rectangle, I get an errormessage that says the number needs to be less than 39,370. Is therea way to get around this?
SOLIDWORKS User Forum
15 yıl önce
Has anyone updated Stefan's Copy Document Options Excelmacros to handle the new SW2009 drawings settings? I am findingthat we have changes to make but the existing Excel sheet Idownloaded does not pick up the new 2009 setup. WTSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
We need the ability to save a BOM template with the assemblypart number and description linked to any view that we insert asitem 1 (in this case). please submit an enhancement request for this.SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
It has been a while since I last used fraction's to dimensionwith, I just noticed that when there is fraction the quote symbolshows up, but with decimal the quote symbol does not show with thedimension. That is kind of odd? Thought there is a option to notshow the quote symbol?SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
We had a problem today with drawings coming out of theplotter with "Solidworks lightweight - out of date print" stampedacross them. When reprinting, the label had gone. Does anyone elseget this?SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
This is just a question of curiosity more than anything. Whyis it that when I do a projected view of a model in a drawing, Ihave to go left to get a right view and down to get a top view, yetI can go up and right to get the isometric view I want? I'velearned to deal with it fairly well, but I was just curious.SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
I want to dimension from the end of the circle to the edge ofthe part, how can I do it. Currently it pick the dimension from thecenter of the circle to the edge. Any help will be appreciated BikSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Does anyone know how to put a note in a drawing that can beseen when the file is opened but can be kept from printing?SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Hi, friends i am getting the crop view boder (profile) which am using to cropthe view, i cant able to select & hide Is there any way to avoid it? Thanks in advance Dina Solidworks 2008 (sp5)SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Sometimes crop views disappears (I mean views is present, butempty). Sometimes helps if I edit crop sketch... But it's annoying way...SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
I have a part that I've set to show hidden edges. It's a weldment, some of the lines show as hidden but others arenot showing. I have a plates and rsa that are now floating in mid air as the boxthey're welded to does not show. Anyone else seening this happen?
SOLIDWORKS User Forum
15 yıl önce
How can I hide one side of the dimension leader arrowSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
While I am placing a stacked balloon set, can I pick itemsfrom the bom itself to propagate the balloons? Problem: I am trying to place a lanyard in an assembly. I created afile with the properties needed to fill out the bom, the file hasno geometry in it. How do I pick the item in the .drw?
SOLIDWORKS User Forum
15 yıl önce
I have a drawing where the primary dimension is in feet andinches but I need to have a duel dimension in millimeters roundedto the nearest 5. That is 5 or 0 in whole numbers not decimals;i.e. 32'-6" = 9906mm rounds to 9905mm.SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
I am creating drawings with multiple tabs that willeventually be used as standard drawings with our custom pneumaticcylinder configurator. The problem is that when I add break linesin the side view, all or most of the dimensions disappear into thinair. Has anyone else experienced this problem?SolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
Hi, Is it possible to view more than one sheet on screen? Just to getan overview and no need for switching beetween. /YngveSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce
how to set for a drawing document to have the dimension textwithin the dimension line and horizontal and not above it. Using SW2006. ThanksSolidworksDrawings And Detailing
SOLIDWORKS User Forum
15 yıl önce