Şuradaki yenilikler:

SOLIDWORKS Kullanıcı Forumu

SOLIDWORKS kullanıcılarının 3DEXPERIENCE Works: SOLIDWORKS masaüstü, bulut bağlantısı ve saf bulut hakkında keşif, etkileşim ve paylaşım yaptığı yer.

Just log in with your 3DEXPERIENCE ID.

Sıralama ölçütü::
Is there a way to assign this leader setting to a part template? I've looked extensively but haven't found it yet. Thanks for any help. SolidworksParts And Features
SOLIDWORKS User Forum
1 yıl önce
Hi Experts How can I make a model of a spring in 2 configurations. Normal and stretched state ? SolidworksParts And Features
SOLIDWORKS User Forum
1 yıl önce
SOLIDWORKS User Forum
1 yıl önce
SOLIDWORKS User Forum
1 yıl önce
SOLIDWORKS User Forum
1 yıl önce
SOLIDWORKS User Forum
1 yıl önce
Anyone have a model for a Middle Atlantic model number - CFR-14-18 I already checked 3Dcontentcentral and GrabCAD SolidworksParts And Features
SOLIDWORKS User Forum
1 yıl önce
Hi I'm looking through this part of a bicycle frame, which has the geometry laid out on a separate sketch. Each feature has a 'On Edge' relation to the geometry sketch. Does anyone know how it's created? These sketches don't seem to be derived from the geometry sketch.
SOLIDWORKS User Forum
1 yıl önce
Hi 1- I needed to create a macro where it is possible to rename the active configuration with the same file name, how can I do this? 2 - Possible when saving a document to run the macro together? SolidworksParts And Features
SOLIDWORKS User Forum
1 yıl önce
Hi all, Quite often I work with mold files from customers. After saving off the assembly as a part file I want to remove all appearance properties (a lot of these molds come in with every part a different colour - really hard to work with). It sometimes takes over an hour for the command to run. Any idea why?
SOLIDWORKS User Forum
1 yıl önce
This keeps happening somewhat at random, but the part I am currently working on becomes grayed out after saving. It almost resembles a .step file but it was created entirely in Solidworks 2020. I can still edit the part, but for some reason the defined black lines disappear. I attached a normal part to show the difference.
SOLIDWORKS User Forum
2 yıl önce
Hello, I'm looking for a certain SolidWorks built in feature. What I'm looking is a way to link an assembly's name into its part's file properties. So basically something similar to $PRP:"SW-File Name(File Name)" , but for the assembly the part is contained into. I assume this is not possible so this is a shot in the dark.
SOLIDWORKS User Forum
2 yıl önce
Hello. I am trying to model the attached image using Solidworks. I tried modeling with a sweep, but the path looks complicated and I can't draw it. Is there a way to model it like an image file, or is there a way to model that isn't the same, but can look similar?
SOLIDWORKS User Forum
2 yıl önce
Thanks. SolidworksParts And Features
SOLIDWORKS User Forum
2 yıl önce
I just came across solution S-076397 in the knowledge base which includes a ZIP file of configurable weldment profiles for the ANSI, AS, BSI, CISC, DIN, GB, ISO and JIS standards. The configurable models are NOT available in the design library These are still the old unconfigurable versions. SolidworksParts And Features
SOLIDWORKS User Forum
2 yıl önce
Hello, I can't seem to figure out how to partially select the grey sketch area inside the hash marks shown on the part in the attached photo and then how to get it to cut up and out to the exterior surface line following the arrows in the photo. Can someone help me out with this? SolidworksParts And Features
SOLIDWORKS User Forum
2 yıl önce
Hi everyone, I hope you're all well and have been keeping safe. A quick question/issue I am having. I have set my part template file to be Z-Up, however, when selecting "normal to" for the front plane on the feature manager, it flips the view 180 degrees compared to the front view in the orientation window/view-cube. Any ideas on how to rectify this?
SOLIDWORKS User Forum
2 yıl önce
Hi, I want both edges to come together at the point and I'm unsure if the variable chamfer using hold line is the right method. I feel as though a loft wouldn't look clean and thought a cut would be easiest, but I am clearly open to suggestions. Thanks in advance SolidworksParts And Features
SOLIDWORKS User Forum
2 yıl önce
Historically one of, in my opinion, the biggest disadvantages of CREO is the lack of Multibody support. Earlier this year with the introduction of CREO 7, PTC has knocked down this limitation and drawn one step closer to SW. SolidworksParts And Features
SOLIDWORKS User Forum
2 yıl önce
This is a very common CSWP preparation question. I watched the tutorial and followed it. I am supposed to receive 13206.34 but I receive 13171.41 g. I would be very happy to know my mistakes.
SOLIDWORKS User Forum
2 yıl önce
Hello, I am trying to print this nut 3D. The thread is custom (5/16-14 LH, modified). Can anyone please help with the THREAD START and THREAD TERMINATION so it can be printed properly. File is attached Thanks for your help.
SOLIDWORKS User Forum
2 yıl önce
Solidworks modeling - Tutorial 0055 ‌ SolidworksParts And Features
SOLIDWORKS User Forum
2 yıl önce