Automate the conversion of imported part geometry into a SOLIDWORKS feature-based, parametric model. Open an imported data file in SOLIDWORKS. Use the Import Diagnostics tool to repair imported geometry. View the FeatureWorks options. Use the Automatic feature Recognition Mode. Map the features to the part model. Guide the Automatic Recognition Mode for the best results.
Control the conversion of imported part geometry into a SOLIDWORKS feature-based parametric model by converting specific features interactively. Interactively convert feature types. Convert features types that cannot be used with automated methods. Recognize multiple similar features at the same time. Re-recognize geometry and change it to a different type. Add patterns from the list of recognized features.
Use Volume features to recognize geometry that does not match any other feature type. The volume feature can be replaced with a standard SOLIDWORKS feature. Recognize volume features. Recognize boss and cut revolve features. Use the Up To Face option with cut extrudes. Replace volume features with standard cut features. Edit the mapped features.
Convert imported sheet metal part geometry into SOLIDWORKS feature-based, sheet metal, parametric models. Recognize common sheet metal features such as Base Flanges and Sketched Bends. Flatten the result to view the flat pattern. Use a hybrid approach combining the automatic and interactive methods.
Convert imported assembly and multibody geometry into SOLIDWORKS feature-based, parametric models. Recognize imported assembly geometry as multiple parts. Use Edit Feature to recognize only selected features from the part. Use child features to recognize multiple features with a single selection.
探索 SOLIDWORKS Treehouse 的使用者介面，這個組合件結構規劃工具適合管理階層和設計人員使用。 瀏覽使用者介面以探索如何使用 SOLIDWORKS Treehouse。 為具有零件和工程圖的新組合件產生結構。
Learn about SOLIDWORKS Flow Simulation software. View sample applications from the real world. View sample real world examples where the software was used.
Prepare SOLIDWORKS geometry for Flow Simulation analysis. Create lids manually. Create lids using the Lid Creation tool. Check if the geometry is water tight for internal flow analysis. Detect leaks in improperly sealed geometry.
Build the SOLIDWORKS Flow Simulation project. Use Wizard to define Flow Simulation project. Define boundary conditions. Define goals. Mesh the model geometry.
Run SOLIDWORKS Flow simulation and monitor it. Postprocess Flow simulation results. Launch the SOLIDWORKS Flow simulation and monitor it in the solver window. Monitor execution of the simulation in the solver window. Postprocess results using cut plots, surface plots, flow trajectories. Create 2D graphs from the calculated results, extract results on desired geometrical entities.
Mesh the Flow Simulation geometry using automated meshing approach. Understand the Basic mesh, and Initial mesh concepts. Control the Global Initial mesh refinement level. Analyze the Minimum Gap Size feature value as the project settings change. Plot mesh on cut plots.
Mesh the Flow Simulation geometry using manual meshing approach. Control Basic mesh settings. Apply manual mesh setting and options. Define control planes. Define and apply local mesh controls. Plot mesh on cut plots.
在選定的頂點與控制點設定半徑值，以於該處產生變化半徑圓角。 此外，您可以將半徑設定為零，以強制圓角聚集成一個點。 沿著選定邊線於半徑變化之處產生圓角。 修改頂點或控制點的半徑值。 在圓角必須聚集成一個點之處，產生零半徑圓角。
使用疊層拉伸特徵或邊界特徵，來產生與周圍幾何充分混合的轉換。 設定邊界特徵的相切選項，以配合相鄰面的曲率。 合併模型中具備不同輪廓的兩個部分。 檢查建立邊界特徵的選項。
複製及導出草圖，以便多次使用原始草圖。 複製的草圖並未與原始草圖相關聯，但原始草圖每次變更時，導出的草圖便會隨之變更。 產生與原始草圖保持相同形狀的導出草圖。 複製草圖。 修改草圖的位置及尺寸。 產生貫穿三個輪廓草圖的疊層拉伸。
