Create an animation to simulate a cable winding off one reel onto another reel. Use a helix, reference plane, and sweep to model the cable. Define equations to modify the geometry and simulate the winding cable. Create an animation. Use a helix, reference planes, and a sweep feature to model a cable. Define equations to modify the geometry. Change the value of a mate over time using the MotionManager.
Lesson
1 year ago
ENG
JPN
Verify that a model is symmetric. This is helpful for splitting a part into the smallest symmetrical body for simulation analysis. Evaluate a model for symmetry. Understand the options and results within the Symmetry Check tool. Split a part into the smallest symmetrical body for use in simulation analysis.
Lesson
1 year ago
ENG
JPN
Import a Piping and Instrumentation Diagram file, which describes the routes, lines, descriptions, and connections of a piping system in text format. Create equipment and routing from the imported file. Learn the basic format and content of a P & ID file. Insert equipment from an imported P & ID file. Create a guideline spline for a piping system, and a route that fits the spline.
Lesson
1 year ago
ENG
DEU
JPN
A From-To List is an Excel spreadsheet that defines electrical connection data for each wire routed in a cable assembly and components, such as connectors, terminal blocks, and ring terminals, to which the wires connect. From-To Lists allow the import of connection and component data into a route subassembly. Create a component library using the Component Library Wizard. Create a cable wire library using the Cable Wire Library Wizard. Use a component library and a cable wire library to create a From-To List with the From-To List Wizard. Place connectors to start routing. Use the \"Guidelines\" routing mode to create geometry for a route. Use the \"Re-route spline\" routing mode to modify a route to pass through pre-defined clips.
Lesson
1 year ago
ENG
DEU
JPN
Search for, manage and view exisiting reports created by SolidWorks Utilities. Export reports to a briefcase or delete reports. Search for, manage, and view SolidWorks Utilities reports. Export and delete reports.
Lesson
5 months ago
ENG
JPN
Explore the basic concepts of creating an animation in SOLIDWORKS. Use the Animation Wizard and MotionManager to create animations that rotate, explode, and collapse an assembly. Create an animation. Explore the MotionManager pane. Use the Animation Wizard to rotate, explode, and collapse an assembly.
Lesson
3 months ago
ENG
JPN
Create a spring using a sweep feature defined in the context of an assembly. Then, animate the spring by adding a linear motor in MotionManager. Create an animation. Model a spring using an in-context sweep. Add a linear motor to stretch and compress the spring. Understand the impact of rebuild errors on animations.
Lesson
3 months ago
ENG
JPN
Create a variable pitch helix that you use as the path for a sweep feature. Learn about the options you have to define the shape of the variable pitch helix. Create a variable pitch helix. Position the profile and path sketches properly for a sweep feature. Create a plane normal to a curve at a point.
Lesson
3 months ago
ENG
DEU
JPN
Use surfacing techniques to create custom blends where fillets produce undesireable results. Remove unwanted faces from a model using the Delete Face command. Use Face Curves and sketches to create a trimming boundaries. Trim faces to form a clean boundary for the blend. Use the Filled Surface command to create a surface tangent to all adjacent faces. Use Knit Surface to combine the surface bodies in the model. Use Thicken to transform the surfaces into solid geometry.
Lesson
3 months ago
ENG
DEU
JPN
Apply a setback fillet to vertices where three or more edges meet. Setback fillets can model cleaner looking blends at the vertices. Add setback values to vertices where three or more edges meet.
Lesson
3 months ago
ENG
DEU
JPN
Create an intersect feature to represent the fluid inside a bottle. Then, use the mass properties tool to determine the volume of the feature you created. Create a configuration to represent the liquid in the bottle. Create a reference plane to represent the fill level of the bottle. Use an intersect feature to model the liquid inside a bottle. Use mass properties to determine the volume of a solid body.
Lesson
3 months ago
ENG
JPN
Create face fillets to modify and repair imported geometry. Define the size and shape of the fillet using selected faces and edges instead of a constant radius value. Use options such as Curvature continuous, Constant width, Tangent propagation, and Hold lines to define the face fillet. Modify imported geometry using a face fillet. Ensure curvature continuity with faces adjacent to the fillet. Set a constant chord length of a fillet. Define a stopping edge, or hold line, for a face fillet.
Lesson
3 months ago
ENG
DEU
JPN
Apply options to constant radius fillets to modify adjacent features, faces, and edges. Use options to control geometry in a constant radius fillet. Keep or eliminate features contained within the fillet region. Set the overflow type to determine how fillets behave when they are larger than the available space. Smooth corners where two fillets edges meet.
Lesson
3 months ago
ENG
JPN
Create 3D sketches using the default coordinate system of the model to orient the sketch entities. Add relations and dimensions to constrain the size of the sketch entities. Use the on-screen feedback when sketching. Use planes to orient 3D sketch entities. Change the sketch plane by pressing the Tab key or by using a plane or planar face. Display multiple viewports to modify 3D sketch entities.
Lesson
3 months ago
ENG
JPN
Use the loft feature or boundary feature to create a transition that blends well with the surrounding geometry. Set the tangency options for a boundary feature to match the curvature of the neighboring faces. Join two portions of a model that have different profiles. Examine the options for building a boundary feature.
Lesson
3 months ago
ENG
JPN
Copy and derive a sketch to use the original sketch more than once. A copied sketch is not related to the original, whereas a derived sketch changes if the original sketch every changes. Create a derived sketch that retains the same shape as the original sketch. Copy a sketch. Modify the position and dimensions of a sketch. Create a loft through three profile sketches.
Lesson
3 months ago
ENG
JPN
Create a variable radius fillet where you set the radius value at selected vertices and control points. Also, you can set the radius to zero to force the fillet to converge to a point. Create a fillet where the radius varies along the selected edge. Modify the radius value at vertices or control points. Create zero radius fillets where the fillet must converge to a point.
Lesson
3 months ago
ENG
JPN
Create and modify splines using spline points, relations, control polygons, and spline handles. Splines can have multiple spline points or as few as two spline points. Sketch with splines. Edit the number of spline points. Modify the shape of splines with relations, control polygons, and spline handles.
Lesson
3 months ago
ENG
JPN
Project a sketch onto another sketch to create a curve that represents the cage for a water bottle. Create sketches that represent the overall shape of the water bottle. Project one sketch onto another to create the 3D curve. Create a sweep feature using the 3D curve as the path.
Lesson
3 months ago
ENG
JPN
Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. By specifying constraints and connection parameters, the desired result can be achieved. Create basic loft feature between two profiles. Refine the shape with a centerline curve, end constraints, and connection points. Select loft profiles and connection points correctly.
Lesson
3 months ago
ENG
JPN
Create 2D or 3D sketches where faces of a model intersect the sketch plane or each other. You can use the sketches to determine draft angles, evaluate curvature, as a sweep path, and more. Create 2D sketch entities where selected faces intersect the sketch plane. Create 3D sketch entities where selected faces intersect each other.
Lesson
3 months ago
ENG
JPN
Learn the best practices for creating sweep profile sketches. Add relationships between the profile sketch entities and the guide curves. Create sketch relations that ensure the correct shape of the profile along the entire path. Set up the path and guide curves before creating the profile sketch. Add pierce relations between the guide curves and the profile sketch. Create a sweep feature with guide curves. Use perpendicular and parallel relations to define the sweep profile.
Lesson
3 months ago
ENG
JPN
Learn about the sweep options that control the orientation and twist of the sweep profile along the sweep path. Set the orientation/twist options to control the sweep profile. Understand the difference between "follow path" and "keep normal constant." Use curvature combs to observe the twist in the sweep profile.
Lesson
3 months ago
ENG
JPN
Set the options of a sweep feature to control the orientation and twist of the profile along the path. Use curvature combs to evaluate the curvature of paths and guide curves. Control the twist of the profile along the path of a sweep.
Lesson
3 months ago
ENG
JPN