Use selection tools to select one or more components in an assembly. Selection tools simplify the selection of components with similar properties or components in proximity to one another. Select components by dragging a box. Select components using a volume. Isolate components. Select components using conditions such as hidden, mated, or internal.
Lesson
7 months ago
ENG
DEU
JPN
Model parts in the context of an assembly, using references to other components to complete the design. The design intent for new parts (sizes of features, placement of components in the assembly, etc.) comes from other components in the assembly. Build a virtual part in the context of an assembly by employing Top-Down assembly modeling techniques. Create features in the assembly context by referencing geometry in mating parts. Understand InPlace mates and external references. Identify external references in the FeatureManager design tree.
Lesson
7 months ago
ENG
JPN
Use drawing view commands that are specific to working with assembly models including broken out section views, alternate position views, and exploded views. Use drawing view properties to represent assembly configurations. Create a broken-out section view to show internal components of the assembly. Create an alternate position view using an existing or a new configuration. Create an exploded assembly drawing view.
Lesson
7 months ago
ENG
DEU
JPN
Insert and manipulate dimensions in existing drawing views. You import dimensions from the model, create custom driven dimension, and move dimensions between views. Insert and manipulate driving dimensions. Create driven dimensions. Edit the properties of a dimension.
Lesson
7 months ago
ENG
DEU
JPN
Use the various Mold Tools to prepare a part for injection molding, including scaling, split line, parting surface, and shut-off surfaces. After preparing the part, you create the core and cavity. Identifty the parting plane. Create a parting surface. Create shut-off surfaces. Create mold body, core and cavity.
Lesson
7 months ago
ENG
DEU
JPN
Utilize functions of the Costing Task Pane and CostingManager tab to analyze the cost of manufacturing a machined part. Use the Costing Task Pane to evaluate materials costs. Learn how to customize material options for material and stock size. Use the Costing Manager to evaluate manufacturing costs. Learn how to customize cost values for manufacturing. Understand the values displayed in the Estimated Cost Per Part. Learn how to apply a markup or discount. Generate a cost analysis report.
Lesson
7 months ago
ENG
JPN
Utilize functions of the Costing Task Pane and CostingManager tab to analyze the cost of manufacturing a sheet metal part. Use the Costing Task Pane to evaluate materials costs. Learn how to customize material options for material and blank size. Use the Costing Manager to evaluate manufacturing costs. Learn how to customize cost values for manufacturing. Understand the values displayed in the Estimated Cost Per Part. Generate a cost analysis report.
Lesson
7 months ago
ENG
JPN
Automatically create a piping route between connections. You choose from one of many possible routes. You can specify that the route goes around model geometry or through reference geometry. Drag and drop flanges. Create a new piping route. Create route geometry using auto-route. View multiple route solutions. Evaluate route solutions.
Lesson
7 months ago
ENG
DEU
JPN
Understand how to start routing and how the route subassembly organizes and stores the components of a route. Enable the Routing add-in. Locate the Piping, Tubing and Electrical menus. Understand a routing subassembly. Identify routing library components. Use the routing library manager to load settings.
Lesson
7 months ago
ENG
JPN
Explore the differences between solid and surface bodies and learn why surface modeling can be a solution to challenging modeling tasks. Understand the difference between a surface and solid body in SOLIDWORKS. Learn why surface modeling should be used.
Lesson
7 months ago
ENG
JPN
Observe stress analysis of a part using SimulationXpress to determine the deformation of the part under the influence of a load (force or pressure). Understand the assumptions and limitations of SimulationXpress. Observe stress analysis being performed on a part.
Lesson
7 months ago
ENG
JPN
Use SimulationXpress to analyze deformation of parts by applying fixtures and loads and defining materials. Vary load and/or pressure and customize materials. Learn to start and run SimulationXpress to analyze a single body part. Get comfortable working with items on design tree. Understand that pressure and/or load can be applied only to faces uniformly and constantly. Understand that custom materials properties must accurately represent part materials.
Lesson
7 months ago
ENG
JPN
Adjust the mesh density to adjust accuracy of a simulation. Run a simulation. Use the SimulationXpress wizard to view results such as the stress, displacement, deformation, and factor of safety of the simulation. Generate and save an eDrawings file or word document both of which display the results of the simulation. Adjust a mesh in a simulation. Run a simulation. Interpret the results of a simulation. Generate an eDrawing file or Microsoft Word document with the results.
Lesson
7 months ago
ENG
JPN
Based on analyses result, optimize factor of safety, maximum stress or maximum displacement value to an acceptable value. Vary a dimension within the range to try to meet the requirement. Make the design leaner or reduce material cost if it meets or exceeds the factor of safety. Achieve factor of safety through optimizing design. Use built-in automation capability to optimize a model. Run simulation.
Lesson
7 months ago
ENG
JPN
Create a sheet metal part of constant wall thickness using sheet metal features. Explore the fundamentals of creating sheet metal parts using the flange method. Create a base flange in a sheet metal part. Understand the use of gauge tables and sheet metal options. Flatten a sheet metal part.
Lesson
7 months ago
ENG
JPN
Create a drawing from an existing part file, insert basic views, and insert and manipulate dimensions and callouts. Make a basic drawing of a part. Insert standard views. Import dimensions from a model into a drawing. Make a change to a dimension. Demonstrate the associativity between the model and its drawings.
Lesson
7 months ago
ENG
DEU
JPN
Trim sketch entities to remove unwanted geometry. Trim sketch entities by their proximity and intersections with other sketch entities. Trim sketch entities using Power, Corner, Closest, and Inside and Outside options.
Lesson
7 months ago
ENG
DEU
JPN
Use the ConfigurationManager to add configurations and modify the part by controlling the suppression state of features and by configuring dimensions. Use the ConfigurationManager to add configurations to a part. Suppress features to represent a different version of the model. Configure dimensions to create different size versions of the part.
Lesson
7 months ago
ENG
DEU
JPN
Insert driving dimensions into a sketch using the versatile Smart Dimension tool. With a single tool, you can create radial dimensions for arc, linear dimensions between two points, and more. The dimension that appears depends on the entities you select. Insert linear, angular, radial, and other dimensions. Modify dimensions. Move and reattach dimensions.
Lesson
7 months ago
ENG
DEU
JPN
Create reference planes in any orientation using existing reference and solid geometry. You use reference planes for sketching or as a reference for other features. Create reference planes in a variety of orientations from different reference selections. Create reference planes from one or more geometric references.
Lesson
7 months ago
ENG
DEU
JPN
The Hole Wizard feature creates standard-sized holes according to ANSI, ISO, and other international standards. Hole type, size, and placement location are input by the user. Create hole wizard holes. Learn the elements and options of a wizard hole. Create multiple holes in the same feature.
Lesson
7 months ago
ENG
DEU
JPN
Use the sketch tools \"Convert Entities\" and \"Offset Entities\" to reference sketch entities and model geometry to create new sketch entities. If the original geometry changes, then the converted and offset entities also change. Create converted entities into a new sketch. Create offset entities. Create a slot using offset entities.
Lesson
7 months ago
ENG
DEU
JPN
The SOLIDWORKS user interface (UI) can be modified to suit your needs by displaying the tools you use most. You can rearrange the display of toolbars and the CommandManager and add your own keyboard shortcuts and mouse gestures. Turn tabs on and off in the CommandManager. Learn how to dock and undock toolbars and panes. Add commands to toolbars. Add keyboard shortcuts. Customize mouse gestures.
Lesson
7 months ago
ENG
DEU
JPN
Create assemblies by adding and orienting existing parts in an assembly. Add mates to connect the components. Create a new assembly from a part. Introduce the assembly FeatureManager design tree. Insert components into the assembly. Move and rotate components. Add mates between components.
Lesson
7 months ago
ENG
JPN