You are using a web browser or a browser version not supported by this website! This means that some functions may not work as expected.
Use or upgrade/install one of the following browser to take full advantage of this site
Internet Explorer 9 and above
Do you have any idea about this dimension?
Categories: Modeling and Assemblies, Sketching
R = Radius
Looks like the radius of the fillet in the corners. Leader hasn't been well managed.
Not the edge, the 6corners between the three rectangles and the cylinder.
Fillet in the corners is not giving correct profile that is in the drawing part.
Do you have any idea about this dimension? I assumed
vice versa is interfering with hole.
It looks like the 13 dimension is from the center of one fillet to the center of another fillet and NOT to the external edge of the part. It is a silly place to put a dimension. Who detailed this print?
Anyway, it looks like your distance from center should be 35 + 13 + 5 = 53. It looks like you only made it 35 + 13.
I don't know where you got the drawing from, but it is not a very good example of dimensioning. I would read that as the yellow as being part of the R6.35(do this second to last, before the R2). The top edge of the angle as R3, the bottom one as R5.
Your 6.4 diameter hole looks to be in the wrong place, as in the drawing it is under the top corner of the angles face.
In light of what Dan Pihlaja has highlighted, I'd say your fillet scheme is correct(non coloured version). Get the dims right he mentions and the hole will look more correctly positioned.
I got it from YouTube.
Does his profile picture look like this?
You seems time spend on profile picture as well.
Is it possible to convert a profile picture into a folder or stick a profile picture on a folder? This way you can get an idea of what is inside a folder and helpful to identify a particular folder among many folders.
in explorer, right click folder, properties, customise tab, in the folder pictures you can choose a file to display on the folder icon.